Had my hard drive replaced and I've restored from TimeMachine backup. I have changed my username and now I can't access my old backups on my TimeMachine hard drive

I've recently had my hard drive replaced in the Apple Store.
I used time machine to backup and after I got my mac back with the new hard drive I restored all my files which are now on my computer and I can access it with no problems.
The problem is that I've changed my username (admin) and when I enter time machine, I can't access the backups of my old hard drive which is really frustrating.
A red negative sign appears on most folders. Also in macintosh HD/users there is a folder named with my old username and I get the same red negative sign in the folders.
Any idea what can be done about this?
If you need more info just ask.
Thanks in advance

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

Similar Messages

  • Toolbar Not Visible: Had to hide by toolbar and now I can't access it. I don't like the Yahoo Toolbar and I can't get rid of it. I've tried RT DBL Click on the open space which takes me back to Yahoo TB. Can't find

    Had to hide by toolbar and now I can't access it. I don't like the Yahoo Toolbar and I can't get rid of it. I've tried RT DBL Click on the open space which only takes me back to Yahoo TB. Can't find anything in the Computer Controls to address this. Any Suggestions??

    you have a ps cs4 license for mac and you have some way of finding your serial number.
    if yes, download an install the installation file.  if you already have the installation file, what is its name and file extension?  (eg, if it's one file, it should be a dmg file.)
    if you need the installation file,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • HT2731 Had iTunes account 4-5 years ago and had all my music stored and now I can't access it, how do I get into old account to get music off

    Had I tunes 4-5 years ago and now it won't let me access iTunes to get music that was stored thanks

    Okay.  My bad.  I just looked up what the home sharing feature encompasses.  And it basically just to be able to stream to any device.  But it doesn't actually store it to that device.  For example:  I open my iTunes and turn on the home sharing.  Then I turn on my Apple TV and search for computers.  And now I'm streaming a movie from my computer's itunes library directly to the TV without having to connect my computer to the TV.
    Here is my advice. And this is what we do in my house.  If you love your Dad's iTunes library, Then just Download all of the audio files to your computer.  While you won't be able to use the cloud features that itunes purchases provide, you WILL be able to have your father's music.  But you'll have to store it at home, on a hard drive somewhere where it's always accessable.
    Actually I have a network drive where I keep ALL of our MP3 and iTunes purchases housed.  And I just drag them from the network drive into iTunes then sync.  This way files aren't being moved all around the house.
    Notes:
    Anything you purchase from iTunes is always readily available in the cloud and does not take up any of your free 5GB cloud space.  Just like when you download apps.  If you have to reset your device, those apps are always still yours to redownload for free since you already bought them.

  • I had my iPhone 5 replaced and now I can't restore my play lists.

    My iPhone 5 was replaced by the apple store here in Sydney, Australia. During the restore in the store, I got most of my content back, but my music was interupted due store wifi.
    When I finished restore at home, I notices that my play list (on my PC) where on my phone + a whole bunch of other songs, which the down load symbole. BUT when I add new play lists and try add to the existing lists or add news playlist they show in summary, but I can't slect and sync them.
    I have try backing up > updating software > restore directly from back up on my PC and still nothing.
    Can anyone help please. I find myself manually adding songs to my phone manually via Match but it complicates things as whenI plug my phone I get the message "some settings have been changed" etc.
    HELP IM LOST.

    Restore iPhone with iTunes on computer. Open iTunes on computer, connect iPhone to computer with Lightning Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.

  • I have just replaced my hard drive and downloaded Yosemite and now I can't access my photos from my external hard drive

    II've just replaced my internal hard drive for my desktop because it failed And installed Yosemite.  I had an external hard drive but it had Mavericks and now I can't access my old iPhoto.  What can I do?

    backup your iPhoto and install iPhoto 9.6 - if you had iPhoto '08 or earlier then you need to download and run the iPhoto library before launch iPhoto 9.6
    If that does not help then you actually need to tell us information and details - like version of iPhoto. exactly why you can not access your photos and any message you got
    LN

  • I have just had my hard drive replaced and now I can.t find Air Port to get wi fi

    I have just had my hard drive replaced and now I can't find Air Port for my wi fi

    Go to your Applications folder>Utilities>AirportUtility.app>and there set up your Airport service.  Then return to your Applications folder>Sytem Preferences>Network> and there turn on the WiFi on your iMac.
    Hope this helps

  • Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

    Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
    Just want to avoild spending hours migrating everything across....

    Yes, I can read but just can't write DVD's. I get:
    This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
    Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
    In the old account I have reset SMU, Pram... but no change.

  • Apple replaced my hard drive (1tb seagate) and now I can't access my Microsoft office because the license was compromised. is this fixable? or will we be adding this to the list of lawsuits..

    apple replaced my hard drive (1tb seagate) and now I can't access my Microsoft office because the license was compromised. is this fixable? or will we be adding this to the list of lawsuits..

    You can reinstall MS using your install disk(s) and the original registration key(s).
    As for your threat, you might want to read the Software License Agreement as well as the Hardware warranty. They are available here:
    http://www.apple.com/legal/sla/
    Here is an excerpt from the SLA:
    8. Disclaimer of Warranties. YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT, TO THE EXTENT PERMITTED BY APPLICABLE LAW, USE OF THE APPLE SOFTWARE AND ANY SERVICES PERFORMED BY OR THROUGH THE APPLE SOFTWARE (COLLECTIVELY “SERVICES”) IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU. EXCEPT FOR THE LIMITED WARRANTY ON MEDIA SET FORTH ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE APPLE SOFTWARE AND SERVICES ARE PROVIDED “AS IS” AND “AS AVAILABLE”, WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND APPLE AND APPLE'S LICENSORS (COLLECTIVELY REFERRED TO AS “APPLE” FOR THE PURPOSES OF SECTIONS 8 and 9) HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE APPLE SOFTWARE AND SERVICES, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF SATISFACTORY QUALITY, OF FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. APPLE DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE APPLE SOFTWARE AND SERVICES, THAT THE FUNCTIONS CONTAINED IN, OR SERVICES PERFORMED OR PROVIDED BY, THE APPLE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE APPLE SOFTWARE OR SERVICES WILL BE UNINTERRUPTED OR ERROR- FREE, THAT ANY SERVICES WILL CONTINUE TO BE MADE AVAILABLE, THAT THE APPLE SOFTWARE OR SERVICES WILL BE COMPATIBLE OR WORK WITH ANY THIRD PARTY SOFTWARE, APPLICATIONS OR THIRD PARTY SERVICES, OR THAT DEFECTS IN THE APPLE SOFTWARE OR SERVICES WILL BE CORRECTED. INSTALLATION OF THIS SOFTWARE MAY AFFECT THE USABILITY OF THIRD PARTY SOFTWARE, APPLICATIONS OR THIRD PARTY SERVICES. YOU FURTHER ACKNOWLEDGE THAT THE APPLE SOFTWARE AND SERVICES ARE NOT INTENDED OR SUITABLE FOR USE IN SITUATIONS OR ENVIRONMENTS WHERE THE FAILURE OR TIME DELAYS OF, OR ERRORS OR INACCURACIES IN THE CONTENT, DATA OR INFORMATION PROVIDED BY, THE APPLE SOFTWARE OR SERVICES COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE, INCLUDING WITHOUT LIMITATION THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT OR WEAPONS SYSTEMS. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY APPLE OR AN APPLE AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE APPLE SOFTWARE OR SERVICES PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THE ABOVE EXCLUSION AND LIMITATIONS MAY NOT APPLY TO YOU.
    9. Limitation of Liability. TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT SHALL APPLE BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, LOSS OF DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR USE OR INABILITY TO USE THE APPLE SOFTWARE AND SERVICES OR ANY THIRD PARTY SOFTWARE OR APPLICATIONS IN CONJUNCTION WITH THE APPLE SOFTWARE, HOWEVER CAUSED, REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR OTHERWISE) AND EVEN IF APPLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION MAY NOT APPLY TO YOU. In no event shall Apple's total liability to you for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the amount of fifty dollars ($50.00). The foregoing limitations will apply even if the above stated remedy fails of its essential purpose.

  • I lost my images from my hard drive and now I can not access them in Lightroom. What can I do?

    I lost my images from my hard drive and now I can not access them in Lightroom. What can I do?

    Your images are truly no longer present on the hard drive(s)? Have you had your operating system do a search for them?
    If such a search fails to find them, here's what I would do, in order
    Look in the trash can/recycle bin
    Restore from backups
    If you don't have backups ... well, why not? ... find a program on the internet called an "undelete utility" (free versons are available) and then download and install it and run it. If you are going to do this, then do not perform any other tasks on your computer except find the program, download it (if possible to a different drive than the photos were stored on), install it (if possible to a different drive than the photos were stored on), and run it. In the future, you will need to commit to making regular backups of your photos and of your Lightroom catalog file, no excuses.
    If that doesn't work, but the thumbnails still appear in Lightroom, you can probably recover the thumbnails from Lightroom via a plug-in, but these would be low-resolution versions of your photos, if you really need instructions on this step, write back

  • Had to reinstall operating system and now I can' t use my iCloud drive because it says my user id is already using the drive!

    I had to reinstall the operating system on my computer and now I can't access my iCloud drive.  It says the user id is already using it.  Help!

    Yeah I have the original CDs. And I have backed up some stuff. But shouldn't things like safari and itunes be working anyway? The applications are there, they just won't open. Someone told me would lose my preferences and just had to update them again, but I can't do so cause safari doesn't work and internet explorer won't let me get on certain sites...

  • I installed iTunes 10.4 on my Windows 7 PC and now I can't access my DVD or BD drives.

    I installed iTunes 10.4 on my Windows 7 PC and now I can't access my DVD or BD drives. I had to uninstall and can now access the drives.

    They aren't related and shouldn't affect each other.

  • HT5570 I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password

    I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password

    What features do you need to change the ID for?

  • I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
    You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

  • Installed iTunes 9 as advised and now I can't access store

    Hi, just installed iTunes 9 and advised when trying to purchase a film and now I can't access the store. I can access my account etc but just get a blank screen when trying to access store! Have tried technical support but they say it's my computer's problem. Why? when I was on the iTunes store 10 minutes previous! Have limited computer knowledge but any help would be appreciated as I'm about to be flying and need some new films!

    I have exactly the same problem. I haven't had access to the iTunes Store since upgrading to 9.0.1 nearly two months ago and none of the suggested fixes have worked for me. I use iolo as my firewall. Does anyone have any ideas?
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Dell Computer Corporation Dimension 4300
    iTunes 9.0.1.8
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number
    Current user is an administrator.
    The current local date and time is 2009-10-29 07:43:00.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
    ** External Plug-ins Information **
    No external plug-ins installed.
    iPodService 9.0.1.8 is currently running.
    iTunesHelper 9.0.1.8 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {E6040F81-0D24-49D2-BF10-A1C14EF963E4}
    Description: 3Com EtherLink XL 10/100 PCI For Complete PC Management NIC (3C905C-TX) - Packet Scheduler Miniport
    IP Address: 99.141.197.14
    Subnet Mask: 255.255.255.0
    Default Gateway: 99.141.197.15
    DHCP Enabled: Yes
    DHCP Server: 192.168.0.1
    Lease Obtained: Thu Oct 29 07:41:34 2009
    Lease Expires: Thu Oct 29 07:51:34 2009
    DNS Servers: 192.168.0.1
    192.168.0.1
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2009-10-29 07:28:11.

  • I accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    i accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

Maybe you are looking for

  • Reinstalled 10.3.4, now date/time doesn't work or open

    I had a hard drive failure, a company replaced my drive with a new one in my G4. The new hard drive works fine, they reinstalled 10.3.4 from my original disks, but the date/time doesn't work and I can't open that panel even. So I just resinstalled fr

  • CONVT_OVERFLOW CX_SY_CONVERSION_OVERFLOW SAPLMELOG

    Dear Friends, While executing the tocde me2n and on selecting a particular purchase order from the list ABAP Runtime error occurs attached in screen shot and on analysis of the error through st22 the following occurs. Category              ABAP Progr

  • Error: You're browser does not support AJAX

    I am running my business software and I continue to get this error. I have safari, google chrome and firefox, but they all give me the same error. Any help? Is there some kind of plug-in or something that will allow me to use AJAX? Please help.

  • Oracle text performance

    hi all. i have useing orcle text for the indexing purposes .. the below query goes for an wildcard search and it performance is very poor .. /* Formatted on 2009/08/11 16:06 (Formatter Plus v4.8.5) */ SELECT *   FROM (SELECT z.*, ROWNUM r           F

  • List output in Module pool programming

    Hi Gurus.,         I need to use write statement to display output using Call Screen xxx starting at xx ending at xx as dialog box .. How can i achieve this ...I tried the following in PBO of the screen but only a blank screen comes as output ... *&