HT1349 i think my i touch has mind of its own won't shut down and navigates to web sites i did,nt intend to go any ideas what,s the problem
is their any person out there having same problem as me ? with their i touch it seem.s to have to have i mind of it,s, own ? every time i go to website our play music it takes off to either apple site or jumps to itouch settings
Well, firstly, you have posted on the wrong section of the forum. This is an iPad discussions. Anyway, regarding your issue, try to reinstall the iOS. I've never heard of iOS behaving like this. However, jailbroken iOS mayhave some wierd behaviours because of the access granted to the apps.
I hope it helps
Similar Messages
-
After my Macbook has been in use for a little while, the light goes off on the screen as if the computer is off. Then, as I start to close the screen, it comes back on fully. If I push it back open it cuts off again. So, I just leave it part way open and turn the laptop at an angle so that I can continue to see the screen & type. It acts like there is a short. Any idea what the problem is?
It does sound like you might have a faulty video connection. See if you can make a Genius Bar appointment at your local Apple Store.
-
HT4623 My I pad has sound distortion any ideas what is the problem?
My iPad has sound distortion what can be the problem and solution. I have the latest version of the Software.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180http://support.apple.com/kb/ts5180
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
Cheers, Tom -
My ipod touch does not show up in my itunes source list, and shows up as a digital camera in "My Computer". Any ideas?
Start here. Is ti normal and expected for the computer to also see the iPod as a comera since that is how you get saved photos from the iPod to the computer.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. I insert the DVD and wait for the player to start automatically but after 10 minutes, nothing is happening and it sounds like the disk has stopped spinning. I've now tried with four different DVDs (all store bought and so perfectly normal disks). The Mac doesn't eject the disk or anything it just doesn't seem to respond to it being there at all.
My main confusion is why this suddenly happened today when it was perfectly fine last week.
Does anyone have any idea what could be wrong and how I could fix it? Thank you.
JinxeWelcome to the Apple Support Communities
See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801 -
my ipod touch, 4th gen is baisically screwing up. to make it work in have to conctantly charge it from the wall. if i pull it out it turns itself off. i cant restore it becuse as soon as i unplug it to put it into the usb port on thhe computer it turns off making restoring impossibe.
Troubleshooting: My computer won't turn on
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
CC 2014 brush has mind of its own
PS CC 2014.1.0
Windows 8.1
24GB RAM
Dual GTX 560ti latest Nvidia.com supplied drivers
Ever since the upgrade I had what I thought was a Clone Stamp tool issue, but in fact, it is a Brush issue (Clone stamp just utilizing a Brush of course).
See attached. I only drew the short vertical part going upwards. Once I let off the mouse, the large leg heading out towards 10 o'clock? Well, that is courtesy of Adobe, I suppose.
I also have the same version on a Yoga Pro 2 - and it does not do this, however, if the strokes using a brush are too quick, the brush comes back to where it started, drawing a line back to source.
Fun stuff.It occurs when using "Use Graphics Processor" in the Performance preference. I made the above vertical lines, but the horizontal lines shooting off to the left are done by Photoshop!
I guess I can just not upgrade to 2014 and stick with CC so I don't have to give Adobe money while this is hobbled for me. OH WAIT - can't do that. I have no choice but to pay Adobe a pound of flesh every month. Will this be fixed? Probable not.
I have a $600 graphics card that works fine everywhere, even in Photoshop CC, but fails to be utilized in 2014 and it's entirely my problem. -
It is doing that after 2 or 3 months after i bought.For example i open Fifa 11 pick team and start the match when match starts it shuts down and the apple logo appears and open again.It does in İnfinity blade,X2 Football 2010.But not in Battlefield Bad Company or X2Footbal 2009.I sent it to service 1 month ago they only changed my battery said it is caused by charging it from Pc.Now i am charging it from usb adaptor but nothing changed.Please help me.I am sick of this.
Thanks.Hi,
Try double-clicking the home button and closing the app(s) you are having trouble with from the multi-tasking tray (press and hold down the app until it starts to shake, and then tap the little red minus sign on the app). Then, try resetting your iPod: http://support.apple.com/kb/HT1430.
Hope this helps!
---likeabird--- -
since I had my computer upgraded to Windows 7 i had to reinstall itunes. my music library disappeared and my ipod classic no lnger synces music from itunes. what can I do?
You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.
-
The app starts to appear, and immediately stays in "waiting". Never does go further than this.
What happens when you try to purchase apps?
When you try to update them? -
Has your first generation iPad ever just shut down and turn back on by itself?
I have just created a new iPad name and account, changing from the previous owner. After synching and completing the thing, it now shuts off and on at will, therefore making it impossible to use it. Any ideas?
No sim card means just that. THere's either no sim card in your iPad or the iPad can't see it. Try turning your 3G antenna off. I believe it's under settings.
You can also give your iPad a reset. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and see if that clears up the glitch. -
I updated my iPad mini to ios 7.0.2 couple days ago. Everything was fine until yesterday. I noticed that it seemed to have a mind of its own. It kept opening and closing app. I'm not sure what to don to fix this problem. I've tried restoring my iPad mini but that didn't help. Can someone please help me?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I pod touch has a mind of its own
I just bought mt ipod touch last december 2012. Its the last model before they came out with the colored vresions. It started to have a mind of its own at the begining of Jan 2013. It changes screens by it self dials up face time from my address book, plays random songs. Whats going on here can somebody help me?
Yes you can also back up to iTunes on the Mac.
See https://sites.google.com/site/appleclubfhs/support/advice-and-articles/ios-resto ring-data -
New Ipad 2 32gb Screen has a mind of its own!!!!
Hi, i got a ipad 2 32gb today and sometimes the screen seems to have a mind of its own. It switches randomly between different pages without me touching it, I have tried a rstore but it is still doing it. Just wondered if anyone else is having or has had this problem?????
Well that certainly isn't good. One thing I would suggest if you haven't tried already is calibrating the screen. Menu>Settings & Tools>Touch Settings>Calibration. This helps mostly if you are having issues with the screen thinking you are pressing a different part of the screen, but doesn't hurt to try. Also, make sure you have the current software version VX11VKV11. You can check by going to Settings & Tools> Phone Info>SW Version. If you have an older version choose software update. If you are still having issues, then this is a hardware issue and the phone will need to be replaced.
Maybe you are looking for
-
Using a Second Display while MBP display is in Fullscreen use
I recently began using a second display consistently (something I only did sparingly in the past), and I was hoping to find out how to utilize my second display while running a fullscreen application on the MBP display (when in fullscreen, the second
-
Windows 7 x64 Network Adapter Stops working on high load
My Network has been failing and it has been happening for about a month or so on Windows 7 x64. I dont think that the system configuration is the problem as it is happening on 2 seperate machines. One being a relatively beefed up "white" box, 4 gig
-
Flash Player 11 ActiveX install fails -- Error 1722
Hi, I am unable to install Flash Player 11.5.502.149 on Windows 8. The error reported is: Adobe Flash Player 11 ActiveX -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expec
-
Mac OS X Lion Version 10.7
I Downloaded Mac OS X Lion on The Mac App Store today $29.99 i paid for, everything went well for me took me 30 Minutes to Install it, The Download Process when I was getting it on The Mac App Store was ok, it did not take long, maybe 20 - 25 minutes
-
Exp/Import database schema vs Ch 10 Exp/Imp Content
Hi I'm using Portal 10.1.2.02. I'm a DBA tasked with migrating a Dev portal into Test, then Production. There seems to be a number of ways to achieve this and I was hoping to clarify which is best for me. I've run through note: 330391.1(copying the P