HT1414 the phone restarting by it self

phone truning off and on for no reason and restart by it self

Restore your iPhone to factory settings.
Go ahead and Google "DFU Mode" for some extra help.

Similar Messages

  • Hi i uppdate my I phone 4 to iso6 via laptop ,during the operation the laptop restart it's self then I connect my iPhone 4 to iTunes again to finish the uppdating but its stuck to Apple log tried to restor it again via iTunes i get the same stuck to logo

    Hi i uppdate my I phone 4 to iso6 via laptop ,during the operation the laptop restart it's self then I connect my iPhone 4 to iTunes again to finish the uppdating but its stuck to Apple log tried to restore it again via iTunes i get the same problem its stuck to Apple logo i tried to restor it from another pc i get the same problem anyone can help please

    Hi, did you ever solve this problem?
    My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
    It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
    It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
    Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
    Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
    Any help would be much appreciated!!

  • My iphone 3gs have a problom because i tryed to downloud apps from my computer without apple id so i tryed update it to ios5 when i made an apple id and the phone restarted dureing the update and i restored it but now i can not activate it why is that ???

    my iphone 3gs have a problom because i tryed to downloud apps from my computer with out apple id so some times it restart and the spring board always get crashed so now affter i made an apple id  i tryed to update it to ios5 but the phone restarted  in the middle of the update so restored the files from my computer but when i tryed to activeate the phone from wi fi it said activeate server is now unavilable and when i tryed to activeate it from itunes it told me there is no sim card why is that

    My phone is an iPhone 3gs too, and last night actually it said the same thing, "No Sim Card" and my friend and I started panicking but I did what I call a "Forced Reboot" where you hold down the Home and Power buttons until you see the apple logo. DO NOT RELEASE UNTIL THEN otherwise you are just shutting it down. So, I did that and it worked again....

  • HT201263 Hi, my iPhone 5s was disabled because i forgot my passcode. I was relying to 3 finger prints that I was saving before. I didn't know that passcode is required when the phone restarted. So I follow every single steps to recover

    Hi, my iPhone 5s was disabled because i forgot my passcode. I was relying to 3 finger prints that I was saving before. I didn't know that passcode is required when the phone restarted. So I follow every single steps to recover my iPhone using i tunes.
    Suddenly an iTunes pop up a message "that I must respond to iTunes on my phone, so that the computer could have access to the phone".
    HOW COULD I RESPOND ON MY PHONE WHEN I WAS DISABLED ALREADY?
    IS THERE ANY BUTTON TO BE PRESS AS CODE COMBINATION THAT STANDS AS MY RESPOND TO ITUNES?
    <Edited by Host>

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
    Disabled Recovery-must use syncing computer.
    For the future, this is the iPod touch forum

  • N8 User - Launch OVI maps, the phones restart

    Dear All,
    Everytome i open OVI maps the phone restart, just got it about 2 weeks now
    Please help any one. Or NOKIA can answer

    jarr15 wrote:
    i tried to hard reset the phone and then i had no other software installed on it, the restart problem by navigation was there, so its unimportant if i have other programs or not.
    Sorry post appears slightly ambiguous, are you saying your N8 still restarts for no apparent reason without installing OVI Maps v3.06 from Nokia Beta Labs to replace the pre-installed v3.04 that has been deleted by "hard reset"?
    Happy to have helped forum with a Support Ratio = 42.5

  • So i have some open work from the night before on my computer and left it on, closed the top, the computer restarted it's self and lost all the work to what was added.....where can i find it....was it auto saved?

    so i have some open work from the night before on my computer and left it on, closed the top, the computer restarted it's self and lost all the work to what was added.....where can i find it....was it auto saved?

    If the application supported auto-save, yes, if not, then no.
    If you were creating a mail message, it might be in the drafts folder of the e-mail program.
    What evidence do you have the computer restarted itself?    Did the Apple logo come up?

  • I downloaded the os 6 by wifi and when the phone restarted it told me to plug into itunes. I did that and the iphone software update has been stuck on '70 hours remaining' for the last 3 hours. Help!

    I downloaded the os 6 by wifi and when the phone restarted it told me to plug into itunes. I did that and the iphone software update has been stuck on '70 hours remaining' for the last 3 hours. Help!

    it says " itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes" so i restore it and after it gets finished it says " the iphone :iphone" could not be restored. the device cannot be found" but ive used this itunes since i got this phone.

  • After iOS 7.0.2 update: Freeze on lock screen, blackout & unresponsive for 5 min then the phone restarts itself

    Happened after iOS 7.0.2 update a few times (2x this morning): Freeze on lock screen, "blackout:" unresponsive to any buttons pressing, after 3-5 minutes the phone restarts itself and works again... (1) May I ask what can I do? I am trying to reset it and recovering the data from backup. (2) Can a virus cause this problem?

    To rule out a software issue, set it up as new device without using the latest backup.
    iOS: How to back up your data and set up your device as a new device
    If it does not charge normally after that, you'll have to get it serviced, the problem might be hardware related.
    iPhone - Contact Support - Apple Support

  • Ringtones i purchased from itunes disappeared when my iphone 4s restarted and they only show up as 'on my device' in itunes library but with a grey dotted circle. How do I get them back? They worked until the phone restarted!

    I purchased some alert tones on my iphone 4s via itunes yesterday. They all worked just fine until the phone ran out of battery and I plugged it in and restarted. They have vanished from the phone and when I connect to my PC they only show up as 'on my device' under tones and with a grey dotted circle by them. How do I get them back? This is crazy! I purchased one a second time, it worked, I switched my phone off and on again and it has gone again!!!

    Having the same issue on multiple alert tones on my Iphone5c.  After purchase they disappear from the phone and show up on my itune under Tones grayed out with a dotted circle next to them.

  • Each time I try to access notification center the phone restarted

    Each time I try to access notification center the phone restarted

    Have you tried the basic 4Rs troubleshooting steps?
    Restart:
    1. Press and hold the Sleep/Wake button until the red "slide to power off" slider appears, and then slide the slider.
    2. Press and hold the Sleep/Wake button until the Apple logo appears.
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    Restore from backup
    Restore as new
    http://support.apple.com/kb/HT1414

  • Just downloaded ios6 to my 4S.  Every time I move an app the phone restarts and app was right where I left it!  Any help?

    Tried hard restarting, doing it with literally every app I try.  Phone also "forgot" my itunes match account

    This worked perfectly! Thank you so much!
    King_Penguin
    Do you currently have Settings > General > Restrictions > Require Password set to 'Immediately' ? If you do then you will need to enter your password for every app update as well as for every new purchase.

  • HT4993 My new 4s ran the battery all way down, and now I can't get the phone restarted please help

    My new 4s had the battery run all the way down, how do I get restarted?

    "You have to change your router's IP address to be able to access it. It will not give you the internet."
    I'm not sure what that means Richard, but I did change the router's IP address from 192.168.1.1 to 192.168.5.1- isn't that what you meant in your first post. I know that isn't reflected in my screen capture that I took last night, but I did do that this morning after I read your post.
    "Log on to your router and change two settings.
    Change the setting in Setup from PPPoE to Automatic Configuration-DHCP and click on save.
    Click on Advance Routing and change the setting from Gateway to Router then click on save."
    I did this and still same results as far as I can tell. Can't get online through the router.
    "Click on MAC address clone under setup tab ... click enable & click clone ...click save settings ... Check the IPaddress under WAN page ....
    If getting IP in public range .... try going online ...."
    I tried this- at least to the part about checking the IP address under WAN. I assume you mean the WAN page in the modem setup- nothing looked any different after trying what you suggested, and I'm not really sure where I would be "getting IP in public range" or what that means.
    I'm about to give up and just buy a new router to see if I can get the same lack of results with a different one. My ISP maintains that everything is set up correctly on their end and really can't do anything more for me. The Modem works and is set up correctly and they can give tech support for a router.
    Here's what my basic setup looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/BasicSetup.png
    Here's what the advanced tab looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/AdvancedRouting.png
    Modem setup looks the same
    Message Edited by Writersbloc on 09-25-2008 07:05 PM

  • TS2755 My iPhone 4 says that I need to restore it every day, even after I have already restored it.  When I try to restart the phone after receiving the restore message, it then changes and says "activation required".  How do I fix this?

    My iPhone 4 keeps having the "Restore Needed" message pop up on my phone.  I have restored my phone several times this week, and it still keeps happening.  The "Restore Needed" message pops up, so I immediately do a hard shut-down.  Once the phone restarts, the phone then says "Activation Required".  I keep shutting down and restarting the phone, and sometimes it snaps out of it, seemingly on its own.  Sometimes I have to go home and restore and activate my phone.  How do I fix this?  I'm 2.5 hours away from the closest Apple store and 1 hour away from the closest AT&T store.
    Thanks!
    Autumn

    Make the time and take it to the Apple Store. Make an appointment first. Or you can call AppleCare and go for a mail in replacement.

  • HT1414 Iphone 3G restarts right in the middle of restore so I keep getting unknown error message.

    Hey everyone, I have an old school Iphone 3G, it restarts itself right in the middle of a restoration so I keep getting unknown error message. I don't know why but no matter what usb port I plug it into, the white bar underneat the Apple logo on the iphone will get right close to the end but then like I stated earlier the phone restarts randomly, so it won't let me restore the product because it keeps getting reset by itself.
    please help me

    Thanks for helping out, but I already tried these steps.
    I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
    Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
    So, it turns out that a broken battery can cause this behaviour.
    But thanks again

  • HT1222 my Iphone 4 said an update was available ios7 spent the time to download it. restarted and the phone did not update  still on ios6. Question is why?

    My iphone 4 had the ios7 upgrade listed avaiable, after spending the time to download 7 the phone restarted and continued to run on 6.1.3, no upgrade.  My question is why??

    Generally that is a sign that the iPhone had previously been jailbroken
    or hacked to work with other than the original wireless provider. The update
    has relocked the iPhone to the original wireless provider. You must
    contact them to see if they provide unlocking and if you qualify.
    If you can get that far, what does it say when you look at
    Settings=>General=>About=>Carrier?

Maybe you are looking for

  • How can I stop my childs ipod and ipad receiving same messages

    how can I stop my childs ipod and ipad receiving same messages, they were both set up to the same email account and itunes account. I have just set up a new itunes account for my daughters ipod and changed hers to the new account but my ipad still se

  • View for active Incidents related to WI (Problem) with status (Active) works but can't be changed.

    Hi, I wanted to create a view of Incidents which are linked to a Problem (any problem). I did a quick test using the Incident (advanced) class, selected to display Incidents with status Active and [Work Item] Is Related To Work Item and status for Pr

  • My Mac Book pro does not recognise the wi-fi net. How to fix it?

    My Mac Book Pro does not recognise properly the Wi-Fi net at home. I've tried many ways in "preferences", but it realy does not work. When connected in the Ethernet port, it works perfectly. Don't have any problems with other computers at home.

  • Mass Seiban costing (CKW1)

    At my current client we will be using Seiban costing in order to generate a cost specific for prject stock materials (which will include parameter effectivity).  I know you can use transaction code CKW1 to cost a specific WBS element/material.  My qu

  • Printing Problem in Report

    Hi,    I am facing a problem while printing the report. My report is taking print from Dotmatrix printer. But print is coming as Portrait form. I want output as Landscape. The same print when i taken from Laser jet , i got Landscape format. But the s