HT1476 sos, nothing happens when I connect the ipod touch to the laptop. No charge, no turn on. any clue?
The I pod has gone blank and when I connect the USB wire to the laptop, nothing happens. no sound, no power to turn on the I pod.
how do you know if the battery is at life end. We just got this within a year.
please help.
thanks
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
Often, when I connect my iPod Touch 2G to the PC, instead of showing up as a device on iTunes, a pop-up appears that says I have connected a camera and asks what I want to do. This device doesn't have a camera in it. When this happens, (not always)I can't update my iPod, no matter how many times I try to connect it. I have an old Nano that has never had this problem at all. Can anyone tell me what to do about this?
Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP -
I connected my ipod touch to the computer. When it brings up itunes and start to sync, it stalls at the last step (6). This keeps me from being able to add other songs from my library to my ipod. I'm very new at this and maybe just don't understand how it works.
Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP -
My ipad is froze with the message iCloud Backup This ipad hasn't been backed up in 2 weeks etc. I have connected it to iTunes on my laptop but still froze...suggestions?
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use it again -
HT1335 NOTHING happens when I connect my ipod nano 6th gen and PC!!
I just got an ipod nano 6th gen, and when i plug it into my PC my computer makes the sounds it always makes when you plug something in, but my computer/itunes doesn't reconized my ipod!!! Help??
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
TS1538 nothing happening when i connect my i phone 4 to itunes
Nothing happening when i connect my iphone 4 to itunes
If you are being prompted for her Apple ID password when updating apps it means that there are one or more apps on your phone that were purchased with her ID. (Apps and their updates are permanently tied to the ID used to purchase them regardless of the settings on your phone.) It's possible that you are inadvertently syncing her apps to your phone. . The only way to stop this is to delete these apps from your phone. You may want to check which apps are checked on the Apps tab of your iTunes sync settings before syncing next time to be sure her apps aren't selected.
To change the Apple ID used for purchasing, go to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using the ID you want to use. -
I have not been able to update my 3gs from 4.3.5, as nothing happens when I connect it to my PC
See #4 in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
When I connect my iPod touch to my computer, I have a list of Events on my iTunes-iPod-Photos. I want to erase these Events. However, the photos are NOT on my MacBook Air-iPhoto. When I check one of the Events and then hit Apply, the photos appear on my iPod. And one last thing: When I connect the iPod and open iPhoto, iPhoto tries to load New Photos (I think), but nothing happens. Any ideas?
Resolved.
-
When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?
There is no Info tab in Mavericks
if you use OS X v.10.8.5 or earlier. If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com.
iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad -
Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?
You can't do that.
And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music. -
When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?
Try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Why does a meesage pop up when I connect my iPod touch saying that the device will not work because the Apple mobile device hasn't been activated?
Refer to this article to restart AMDS:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567 -
When I connect my iPod touch to my stereo, I cannot change tracks using the iPod or the stereo controls. I did not have this problem with my iPod nano. I have the software update 4.2.1 installed. Is it a problem with the software or the stereo? Please help.
Here:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
When I connect my Ipod touch, the device dosent show up
When I connect my Ipod touch to my computor. The Device from itunes dosn' t show up. So I cant really sync my music or other stuff that I want to put on my Ipod. Please help me!.
Ok, there can be several reasons an iPod will do this:
1.) The device may have a hardware issue, such as the 20-pin connector's connection to the logic board of the device is faulty, etc.
2.) A software/firmware issue is restricting the device from connecting with the computer properly.
Here are a few things to try:
1.)
1. Restart your computer
2. Power off your device
3. Plug in your device
4.) Launch iTunes if it does not automatically launch
if that does not work:
2.)
1. Keep your device plugged into your computer.
2. Power off your device while it is connected.
3. Disconnect your device
4. Begin holding the home button of your device
5. While holding the home button down, plug your device into your computer
6. Continue holding the home button until iTunes pops up (if it takes more than, say, 1 minute, it is not working). iTunes will say it detected a device in recovery mode, and that you will need to reinstall your software. Do so by clicking the button 'Restore' under the picture of your device in iTunes (when you are on the page of your device inside of iTunes).
if that does not work:
3.)
1. Power on your device while connected to your computer
2. Leave your device connected to your computer and power off your device by pressing the home and power buttons down
3. After 10 seconds from the time you started holding the buttons, release the power button, but continue holding down the home button
4. Stop holding the home button down once iTunes launches and says that your device is in recovery mode, then proceed to do a software restore by clicking on your device in iTunes, then clicking the button that says 'Restore'. -
Can I get iMovie to stop opening the camera dialog when I connect my iPod Touch?
Can I get iMovie to stop opening the camera dialog when I connect my iPod Touch?
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Restore the default home page
* https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
Check and tell if its working.
Maybe you are looking for
-
Hi, I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a
-
Reset Manual depreciation for an asset
Hi Friends, I have posted manual depreciation to an asset for the previous period and i closed the period. Now i realized i have posted wrong amount for the the previous month. Now i want to make it Zero and i want to post it again. Please suggest me
-
Save as pdf deleted bookmarks when combining pdf-files
Hello, when I save several books each to a pdf-file with save as pdf (or printing to .ps and converting afterwards), the bookmarks are deleted when I combine the pdf-files with Acrobat. Only one bookmark for the 1st. file exists in the new pdf-file.
-
N85 will not hard reset after V30 firmware update.
I just got my new Black N85, this is my second one I also have a copper one but it is only at version 20 firmware and when I did a update to version 30 firmware, I could not do a hard reset doing the *#7370# or the three finger reset, all it did afte
-
IndentAndSpacingFormat - Bug in API or am I doing something wrong?
I have a FieldObject in my report with double line spacing (LineSpacing=2) and then try following code to see its spacing format: double lineSpacing = myFieldObject.FieldFormat.StringFormat.IndentAndSpacingFormat.LineSpacing; Unfortunately this retur