HT1595 I can see my wireless station, but I get error (5) when I try to connect

I can see my wireless network, but when I enter the password and try to connect, I get an error code (5). Restart didn't work.
I can't reset because there is no connectivity.
Any ideas?

The ps3 problem tends to indicate a router problem. Have you powered off and then back on your router?
For the iPod try:
- a reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Reset Network settings: Settings?|>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Similar Messages

I can 'see' my wireless printer but my iMac believes it is low on loner when it is not. How can I clear this condition?

I can 'see' my wireless printer but my iMac believes it is low on loner when it is not. How can I clear this condition?

Remove the toner cartridge and gently shake it from side to side while holding it level (in the position it is in while in the printer). Re-insert the cartridge, restart (power cycle) the printer. Then restart the Mac and test.

I can see my wireless network,but my ipod4 will not let me connect to the network?

I can see my wireless network, but my ipod4 will not let me connect to it. When I try it tells me that it is unable to join. I can access the network on my laptop fine. I am also having trouble with connecting my ps3. It has the exact same problem. Can anyone help me?

The ps3 problem tends to indicate a router problem. Have you powered off and then back on your router?
For the iPod try:
- a reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Reset Network settings: Settings?|>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

HT201364 Can someone help out. I'm getting this message when i try to download. The product distribution file could not be verified. It may be damaged or was not signed.

Can someone help out. I'm getting this message when i try to download. The product distribution file could not be verified. It may be damaged or was not signed.

See this link from another similar question. It may need patience to resolve. I think Thomas Reed's suggestion is best place to start.
App Store rejects buy of Mountain Lion: Apple Support Communities

Im getting Error (-9808) when I try to purchase a song. How can I fix this

Each time I go into the Itunes store, I can navigate around the store with no problem. However, once I try to make a purchase and enter my login info, I get the message: "We could not complete your ITunes Store request. An unknown error occurred (-9808). There was an unknown error in the ITunes Store. Please Try Again Later." I have been "trying again" for 2 weeks. How can I fix this?

I HAVE DELETED AND RE-INSTALLED AND STILL GETTING THIS ERROR
NOW I CAN'T EVEN LOGIN AND I GET THE ERROR MESSAGE
IF I USE THE INTERNET AND GO TO APPLE WEB SITE I CAN LOGIN BUT IT GIVES ME THE ERROR AGAIN WHEN I TRY TO ADD MUSIC TO MY CART BECAUSE IT WANTS ME TO LOGIN TO VERIFY AND THEN IT GIVES ME THE ERROR AGAIN
Error (-9808)

I have an internet connection but keep getting error 306 when accessing I tunes store

I keep getting error 306 when accessing I Tunes store but I have an internet connection. What do I do to repair?

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

HT1998 How can I administer a Gen 1 Airport Express from Airport Utility 6.3.2 (OS 10.9). I can see the base station but get the message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more inform

How can I administer a Gen1 Airport Express from, my MacPro (OS 10.9, Airport Utility 6.3.2). I can see the Express in the WiFi window but from the Airport Utility I get the following message: " This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Of course there's nothing of value on the support page. Any clues anyone?

Apple has dropped support in Mavericks (10.9) of the AirPort Express and AirPort Extreme models that were discontinued more than six years ago.
You can still administer the older AirPort models if you have a Mac running Leopard, Snow Leopard, or a PC.

TS1424 Some but not all of my purchases from iTunes store (TV shows) have been downloading in a Quicktime format that can't be viewed via iTunes or on apple TV (1st gen). I get error message when I try to convert.

Since I have a new iMac and now use Mountain Lion, I am observing that TV shows purchased in iTunes sometimes download in a Quicktime format that will not open in iTunes. In some but not all cases, I right click "open in" and select iTunes and then it will play. However, this doesn't always work. When I open in Quicktime and try to export to iTunes, that won't work. When I try Wundershare's Video conversation program, it won't even accept the file. What's going on here? Any ideas? Please reply [email protected] with any suggestions.
Kathy

Thanks for the help Ricky.
I did put my iPod into DFU and iTunes recognized it in restore mode. After restore I am back where I was before - iTunes cannot connect because of an unknown error.
I have installed Jailbreak to see if I can bypass itunes but haven't succeeded. I can't get my computer to recopgnize the iPod as a device.
I'll take it to a Genius bar next time I am in the area of one. Until then I'll probably continue to try hacks to get it connected.
Dan

Importing Closed Caption .scc file into Premiere Pro CS6. Closed Captioning is enabled but cannot see the Captions tab. Also get error message when importing to bin.

I am using Adobe Premiere Pro CS6. My aim is to export an mpeg file with closed captioning embeded for network television. I have watched numbers adobe videos and have spent countless hours researching this. I am able to generate about 29 different types of Closed Caption files using MovieCaptioner- including .scc (which Adobe says they prefer). When I try to "Import" the file I get an incompatible error message. The same happens with all other cc file types when I try to import them. Second, I tried attaching the .scc as an attachment in the sequence menu. They show up in the preview window, but do no encode into the mpeg file. I am aware of this form: Re: How do I export closed-captioned movies from Premiere CS6?
Third- I have watched some adobe video for created the CC files within Premiere. http://tv.adobe.com/watch/learn-premiere-pro-cc/create-closed-captions-within-premiere-pro /
However, I cannot find the "Caption" menu to do so? Where is it?
Am I running into problems because I am not on the Creative Cloud? IF so, is it possible to upgrade and how do i do that. Adobe has made it incredibly difficult to contact anybody.

Hi Bracmanf,
bracmanf wrote:
I am using Adobe Premiere Pro CS6. My aim is to export an mpeg file with closed captioning embeded for network television.
Sorry, you cannot do this in Premiere Pro CS6. Only QuickTime files can be exported with embedded closed captioning and this must be done in Premiere Pro CC or later. All other formats must use a sidecar file.
bracmanf wrote:
When I try to "Import" the file I get an incompatible error message. The same happens with all other cc file types when I try to import them. Second, I tried attaching the .scc as an attachment in the sequence menu. They show up in the preview window, but do no encode into the mpeg file.
You can only attach a closed caption file in Premiere Pro CS6, no encoding is available for closed caption files (embedded or sidecar).
bracmanf wrote:
However, I cannot find the "Caption" menu to do so? Where is it?
Caption is a tab is in the Export Settings dialog box if you want to export with closed captions. This tab is available in Premiere Pro CC and later.
bracmanf wrote:
Am I running into problems because I am not on the Creative Cloud?
In Creative Cloud, you would still have trouble encoding a MPEG 2 file with embedded captions as it is a QuickTime only feature. There might be a plug-in available, but I'm not aware of it.
bracmanf wrote:
IF so, is it possible to upgrade and how do i do that. Adobe has made it incredibly difficult to contact anybody.
You can download a free trial of Creative Cloud here: https://creative.adobe.com/products/creative-cloud
Thanks,
Kevin

I sometimes get Error 42 when opening a TCP connection - how can I fix this ?

In my Labview application I am opening a TCP connection in an identical way to the Data Client example. I am using a direct connection to external equipment using an ethernet crossover cable. The error occurs on at least 2 different PCs.
The error can occur regardless of whether anything is connected to the ethernet port of the PC.
The only way I have found to clear the error is to power down the PC and restart with a connection to the office LAN. Then I can swap back to the crossover cable and talk to the remote equipment once again, ...unitl the next time the error occurs.
I have LabView 6.0 running on Win98.
Any help greatly appreciated.

Jeremy,
Thanks for taking the time to answer
I already checked the link you suggested but I am connecting to my remote instrument with a 2m cross-over cable.
I Have looked into this a little further, it seems the sequence of events is as follows -
1. After some hours the connection gets lost.
2. TCP Read returns error 66 - Connection was closed by peer.
3. If I try to restart my program I get Error 42 at TCP open Connection.
4. Rebooting the PC doesn't clear the error 42 problem.
5. If I try to PING my instument I get "Host unreachable".
6. I have to "refresh" my network card by connecting to our LAN and either opening a file on another PC or simply sending a PING to another PC.
6. I can then reconnect my remote instrument via cross-over cable
and we're up and running for another few hours.
I get the same problem on two different PCs with different NICs and different OS (Win98 and WinME)
I am assuming that because a reboot has no effect that its not a memory allocation problem.
It seems like LabView stops talking to the NIC and then gets locked out some how.
Any other tips ?

HT201413 I keep getting error-36 when I try and transfer my iPhoto library to my hard drive. Can anyone help me please.

When I try and transfer my iphoto library from my computer to my harddrive, I keep getting error message "error-36". Can anyone help me please?

Odd, it seems. In the Finder "Get Info" display, you are seeing something like this?
Click the "Details" triangle and then the little padlock, and you should be able to change the permissions. Click the lock when you are done and close the Info window.

TS1843 Can anyone help me, I keep on getting resource unavailable when I try to down load an audio file on my ipad air

Can any one help me in fixing this error "resource unavailable "every time I try to download an audio file on ipad air

Try posting in the iPad forum
https://discussions.apple.com/community/ipad/using_ipad?view=discussions:s:

HT3775 I have an older white MacBook , I am running Tiger OSX 10.6.8. I want to see an AVI file but I get errors saying that I need some component of Quicktime. Could you tell me how can I go about finding the components that I need or ways to open AVI f

I have some videos from youtube to be used in the classroom. I downloaded them from my pc but I cannot see them in the mac because I get messages saying that I need some quicktime components. Is there any way of seiing AVI files? Or do you know the components I need?
Thanks
ELena

This little thing will open your .avi files. It's free, and you do not need Quick Time.
http://www.videolan.org/vlc/index.html

Officejet6600 print perfect but I get error message when scanning and just idles when trying to copy

Hello, I have an OfficeJet6600 printer and up until just yesterday this unit funtioned normally and had no trouble printing, scanning or copying from my computer. Yesterday however I found I could not scan and then worked with an HP support Rep on the phone regarding my HP OfficeJet6600 not scanning properly. I am connecting to my printer wirelessly and have no issues printing. However, I cannot scan and when I attempt to do so get a scanner unreachable message. The Rep deleted and reloaded every program and file associated with the printer and still the same result. He advised me that the issue lies in my Windows 7 64bit OS and I might want to contact Microsoft support for a patch to fix the problem. He also advised me to chat the forum as there may be a solution there that someone already optained from Microsoft.
I starting looking through the forum this morning and came across some correspondence a Rep had with another customer and he advised the customer to check to see if the copy feature worked. He stated that if it did not work either then more than likely it is a hardware problem and not a software problem. At any rate, after reading that I tried to copy and sure enough the printer cannot complete that task either. When you hit copy it say's copying on the printer screen but little icon beside copying just spins forever and nothing happens. You actually have power down the printer to get it to stop. Now I am confused.... Do I have a software or hardware issue?

Hello,
After reading the problem description, i see that its a printer hardware issue. Its the scanning module that seems have an issue.
The solution to this issue is Servicing the printer unless you have tried the below mentioned steps...
While the printer is ON, unplug the power cord from back of the printer.
Wait for 60 seconds.
Plug in the power cord directly to a wall outlet ( bypass the surge protector / power strip ).
If printer does not power ON, then press the ON button to do so.
When the printer goes silent, then try making a COPY.
If issue still exists, then its time to service the printer.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HT1595 I can see my wireless station, but I get error (5) when I try to connect

Similar Messages

Maybe you are looking for