HT1600 am trying to connect my wireless keyboard to my apple tv and it stays in a searching mode and does not pick it up. help

am trying to connect my wireless keyboard to my apple tv and it stays in a searching mode and does not pick it up. help

Welcome to the Apple community.
There probably isn't a lot you can do, since the router settings will be beyond your control. Many such services in hotels and the like, use a system whereby you need to login through a webpage, since the Apple TV cannot display webpages, there is no way around this. You would probably be best asking at reception if this is the case.

Similar Messages

  • TS2662 I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac, but it does not see the numeric pad. Any advice?

    I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac running Mountain Lion. I followed all recommendations in article http://support.apple.com/kb/TS3048#1.  My computer recognises the alpha part, but it does not see the numeric pad. Any advice?

    Hello:
    I would try resetting the PRAM and SMC.
    Barry

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • When I type a message on my wireless keyboard, in a chat room, when I hit enter to send it, it does not go...any ideas or help. I am wondering if somehow I have locked it, but not sure if I did...how to unlock it

    When I type a message in a chat room, on my wireless keyboard, hit enter to post it, nothing happens. I am not sure if somehow I have inadvertently locked the keyboard...and if I did...how do I unlock it!!

    I don't think you can lock your keyboard, but then again, I've been known to be wrong
    see if your wireless keyboard has become unpaired (I'm assuming here, that it's bluetooth).
    Make sure that the keyboard's batteries are okay, and that the power switch (if the keyboard has on) has been turned on, then go into Bluetooth preferences, and make sure your keyboard is discoverable, pairable and a favorite, and that Bluetooth is turned on. Re-pair the device with your iMac and it should respond. If not, you may have to delete it from the Bluetooth, add it again, and re-pair it, if that makes any sense to you. Sounds like you may also have some lag in replying in your chat room, maybe the chat program you are using might have a preference or two??
    JB

  • How can i connect a Wireless Keyboard and a Trust mouse with a brand new Mac mini?

    How can i connect a Wireless Keyboard and a Trust mouse to a brand new Mac mini?

    Go to the Bluetooth icon on the menu bar and select "Set Up Bluetooth Device". Follow the wizard.
    Alternatively, if you haven't yet unboxed and setup the Mini, you can pair the keyboard to the Mini (and possibly the mouse). However, I would set up with a USB keyboard and mouse and pair the Bluetooth devices afterwards.

  • M trying to connect a wireless Samsung 2525W printer

    Hi
    I know it should be easy but I am trying to connect a wireless Samsung printer to my network without success
    It offers WPA personal or WPA2 personal - have tried both think WPA2 the right one
    Then offers AES or AES&TKIP - think either should work
    Then asks for WEP Key index ??? offers 1,2,3or 4 - not sure what this is
    Any help or suggestions
    many thanks

    Maybe we can get the printer setup with the instructions from SS for the Mac.
    http://www.samsung.com/us/consumer/office/printers-multifunction/black-and-white -laser-printers/ML-2525W/XAA/index.idx?pagetype=prd_detail&tab=support#
    Try this and if you get stuck, post back and i will try to help.
    I have a wireless HP that I use to have setup wirelessly.
    Plus, the info from Samsung looks straight forward.
    later

  • Is it possible to connect a wireless keyboard so that it works automatically with either macbook pro or iPad depending on which is turned on or do I have to go through the delete one and re-pair the other process every time?

    Is it possible to connect a wireless keyboard so that it automatically connects to whichever previously paired device is turned on?

    Grant Bennet-Alder West of Boston, USA 
    A new 1TB External drive (suitable to replace your current Internal drive if you choose to) and enclosure can be had for under US$160
    Ehh, you meant $60 ,  not $160
    CassHeger 
    I do need to buy an external HD to be used solely for that purpose.
    Yes, quality HD are cheap as dirt.
    however a likewise Toshiba Internal HD 1TB is $70   (same as used by Apple)
    http://www.ebay.com/itm/TOSHIBA-MQ01ABD100-1TB-5400-RPM-8MB-Cache-2-5-SATA-3-0Gb   -s-Internal-Notebook-/121107538930?pt=US_Internal_Hard_Disk_Drives&hash=item1c3 2 9263f2
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim and perfect
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package)    $117
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive  
    $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+72 00+RPM
    Most storage experts agree on the Hitachi 2.5"

  • Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

    Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

    So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
    Other questions that may help me (or somebody else) understand your problem better:
    Which of the pieces were verified as working before the introduction of the AirPort Extreme?
    Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
    Are you using the same port on the GT704WGB? Have you tried another one?
    If the desktop has multiple ethernet ports, are you using the same one?
    Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
    What category ethernet cable are you using? 3? 5? 5e? 6?

  • Lost my Bluetooth connection (no wireless keyboard or touchpad).

    I've just updated to 10.6.8 and lost my Bluetooth connection (no wireless keyboard or touchpad). How do I get it back?
    I went to About this Mac and under Bluetooth it says No information found. However, before the update, both the keyboard and pad worked fine.

    You are welcome. 
    Barry

  • HT4972 Hi I have an iPad with iOS 612 and am trying to connect a wireless printer, I don't think it's doing it because I don't have iOS 10 or more. Is this right?.

    Hi I have an iPad with iOS 612 and am trying to connect a wireless printer, I don't think it's doing it because I don't have iOS 10 or more. Is this right?.

    If you want to use AirPrint - the buit in feature in iOS that allows you to print directly from the iPad without another app - you need to be using an AirPrint Printer. There is a list of those printers here.
    AirPrint basics
    If your printer is not on the list, you may still be able to use your current printer, but will need to purchase a printing app for the iPad from the App Store.
    I don't understand you reference to iOS 10 unless you mean OS X10 for Mac.

  • Trying to connect my wireless g router

    Hi,
    I am trying to connect my wireless g router (WRT54G) to my cisco router from my company. My cisco router was configured by my company so that I can use the office phone. I need wireless access in my house (I work from home), and so I am trying to connect the WRT54G to the cisco router.
    I followed the instructions on the setup CD, and it got to the point where it checks the configuration, and then it crashes, and wants to send an error report to microsoft (which I don't understand, but is another question for another time!)
    I am completely at a loss here, and don't know what to do. I barely understand this whole internet/router/W.A.P./network thing as it is, and am frusterated.
    Any suggestions?
    Thanks!
    Shelley

    Don't use the CD. You are running behind a router already and you don't want to set up two chained routers. Instead set up the WRT as access points like this. Be sure to pick a valid and free LAN IP address in your current LAN for the WRT.
    To secure the wireless you also have to do the following:
    * Change the wireless network name (SSID) from "linksys" to something unique (Wireless tab).
    * Enable wireless security. Use WPA2 Personal or WPA Personal. Use AES+TKIP for WPA2 or TKIP for WPA. Enter a strong passphrase.
    * Change the default password of the router ("admin") on the Administration tab.

  • Connecting a wireless keyboard

    Is there a way to connect to AppleTV with a wireless keyboard like the Apple Wireless Keyboard to make typing faster.

    Hi,
    I am using 1Keyboard on my Mac and the remote App on the iPhone. I connect with the remote app to the iPhone and with 1Keyboard I connect the keyboard with the iPhone. That works absolutly fine!
    Hope that helps,
    Cheers, Maik

  • HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I am trying to connect my MacBook Pro to my TV with a mini display port to HDMI converter. Its not working. Any suggestions?

    I am trying to connect my MacBook Pro to my TV with a mini display port to HDMI converter. Its not working. Any suggestions?

    Depends on your model TV.   Read your TV user manual.  The newer models have "how to hookup" instructions for computer & games.
    You can also do a forum search as well as a Google search.

  • I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless.

    I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?

    Don't use the CD software its not necessary.
    Infact put it in the trash.
    Your router will have an IP address in the range 192.168.1.1
    Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
    Also connect your router to your telephone line.
    Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
    Enter the default password and username (They are on a label on the router )
    Your now have the ability to set up your router.
    Your will need the password and user name supplied to you by your ISP at a minimum.
    Enter these and most modern routers automatically configure the basic networking setting.
    You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
    You should be online.
    Now remove the cable and connect to the Wifi and enter that passphase.

Maybe you are looking for