HT1620 where are the patches that are being discussed all over in the media??? i have an iphone and ipad and had no APPLE updates for a long time.
where are the patches that are being discussed all over in the media??? i have an iphone and ipad and have had no APPLE updates for a long time.
Thank you... one would think that if Apple needed to push out something so important they would make it more obvious!!!
Similar Messages
-
I have an iPhone 4S, iPad and MacBook Air. I'm looking for a program or app that I can sync though iCloud that will allow me to us all of these devices to track time spent on projects each day along with the ability to add specific information about each project. Any suggestions are appreciated! Thanks!
I recommend you consider Omnifocus. It is a task management program which runs on the Mac, Iphone & Ipad. I use it for task management and project management. It let's you store additional information as well. I sync all three devices through a Mobile Me account and I can enter data on any device and it is available on all devices. I believe you can also sync through Dropbox. I'm not sure that you can sync through iCloud yet. The link to their website is: www.omnigroup.com. There may be less expensive alternatives, but this one meets my needs and syncs very well across all devices.
-
I had itunes working properly for a long time till one day, it was configuring to open the program then i get a message out of nowhere that says could not acess network location %APPDATA%\ i cant even uninstall without this, whats the big deal?!
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program -
How can i get my itunes library on my fiances' iphone 5? I have an iphone 4s, ipad and a Mac book pro. I thought I could have my music on up to ten different devises? I signed in on his phone and my music is in his itunes account but it is not in his music file.
I regret to say that you need a new computer. That G5, as good as it still is, simply cannot run the required software to be used with the latest iPhones and other software.
-
I have 3 iPhones, one iPad and 2 PC's, all using the same iTunes account. I want to be able to have each iPhone keep their own list of accounts and music list and the I pad different as well. I want to 2 PC's music list to match. How do I do this?
Additionally, when I connected iPhone #3 to one PC, it removed the contacts from #3 and replaced it with contacts from iPhone #2. How do I get those contacts back and prevent this from happening again?Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
This may seem basic, but I just discovered that I do not have a share button (the one with the little arrow jumping out) to the left of my address bar on Safari for my Mac. I do have one on my IPad and use it often. Can anyone tell me why my Mac is missing this icon and how to get it? Thanks.
lawrencefromgettysburg wrote:
I went in to do the software update, and learned that my software is up to date.
Going from Lion to Mountain Lion is considered an upgrade (because it is not free), not an update.
So yes, given that you have Lion, you are up to date. But if you can, you might consider going to Mountain Lion for a fee.
Here's what you need to do the upgrade:
System requirements for OS X Mountain Lion -
I have a ipad and ipod. I can not download any music with itunes. Please help me find itunes that works with windows 8.
Thank You, Patricia GrahamTry this site:
http://www.apple.com/itunes -
Please help ! Why can I not " move and scale my pictures as wallpaper on my iPad mini ? I can do it on my ipad and iPhone. No one seems to be able to help. I am not alone in this but nothing is being done to solve this problem. I have googled and there is a lot of discussion on this, many updates have happened , but still I am unable to do it. Very frustrating !
Do you have the parallax effect (the 3D effect) 'on' (Settings > General > Accessibillity > Reduce Motion 'off') ? If you do then you will either need to create higher resolution versions of your images, or turn that effect 'off'.
From http://support.apple.com/kb/HT5595 :
When the parallax effect is on, you may notice the following:
Wallpaper, icons, and alerts shift slightly as you move your phone.
When you set a wallpaper in Settings > Wallpapers & Brightness, the photo or image will be slightly zoomed and can't be scaled to fit the screen.
If you zoom in, you will need to rescale your wallpaper to fit to the screen. You can't rescale certain photo formats, including landscape or square images. -
So i don't know the password to my ipod and it's disbled. i also don't have a computer. What should i do? Is there a possible way i could unlock my ipod without losig=ng anything?
You maybe able to get the photos off the iPod by:
iOS: Importing personal photos and videos from iOS devices to your computer
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You will have to then restoe the iPod via iTunes. It may be necessary to place the iPod in Recovery mode to allow the restore. -
On my new iPAD2, when I tap an icon for a long time it doesn't flick. What can I do for that?
On my new iPAD2, when I tap an appls icon for a long time it doesn't flick. What con I do for that.
Try this and see if it helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Or....
Quit all apps and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
I tries to synchronise my ipad cause i haven't done for a long time but i didn't finishe it so now it's showing a picture of my powercable pointing at the itunes logo
Your iPad is in Recovery Mode.
Read this: http://support.apple.com/kb/ht1808
Follow the instructions very carefully. -
Can you please CLEAN up the podcasts that are no longer in service or being maintained? It's very tedious to click on someone's podcast to find that it hasn't been updated in 3 years.
This is a user forum and it is best to post these inquiries to Apple Feedback:
http://www.apple.com/feedback/
You are right, a lot of older dead podcasts do not belong in the podcasts section. But there is still a lot of these podcasts that have good information and deserve to still be listed. For example there is quite a few photography lesson based podcasts in which you can get good information from different sources. -
How to capture the values that are being passed to a function module?
Hello Experts!
While executing the transaction SBWP to send a document the FM 'SO_DYNP_SHORT_MESSAGE' gets triggered as soon as the SEND button is pressed would anybody please let me know how i can capture the values that are being passed to it in the process of sending a document?
Regards
SanguineHi
well, I'm not asking you to explain about how an implicit enhancement can be done. i was just referring to the two options posted in the reply. Is there any other way out apart from the implicit enhancement option. i do find class CL_BS useful as the Method ADD_RECIPIENT gets triggered . even though there's no attachment option in the screen that pops up after the method ADD_RECIPIENT is triggered. would anybody suggest me as how to proceed further to capture the values though without attachment details
Regards
sanguine -
OUI-10091:There are no patches that need to be applied from the patchset
Hi All,
when i try to apply 10.2.0.3 patch on 10.2.0.1 in linux x86 I am getting into this error.
OUI-10091:There are no patches that need to be applied from the patchset Oracle Db 10g R2 Patchset 10.2.0.3.0
The original ora inventory is lost and cannot be recovered.
So is there any way I can upgrade the database software.
Please advise.
thanks in Advance
-PKYou should first try to troubleshoot the missing inventory issue. Check this metalink document:
OUI-67105 Due To Missing Or Corrupted Central Inventory In 10g
Doc ID: Note:417236.1
~ Madrid -
1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish
Maybe you are looking for
-
Why does iTunes not recognize my phone and looks at it as a new phone everytime I connect?
It started after the iOS 5.0 upgrade. Continues after iOS 5.0.1. (I have been syncing the same iPhone, my iPad 2, my iPod touch, and an older iPod Nano, for months.) I connect (via USB or wireless) and iTunes says "This computer has previously been s
-
In iTunes I click on a song and when I click on the "get info" tab, it opens up but everything is gray - locked, therefore, I cannot edit the year or genre of the songs. Not every song is locked, only certain ones for some reason. Any help?
-
ABUMN Intracompany Transfer at NBV
Hi Experts, My requirement for intracompany asset transfer, ABUMN is to have the accumulated depreciation tally with the depreciation expense per cost center. However during testing, the standard behavior of the system is to link the accum. depr to
-
Lastfmhelper? What is it and why is it always "not responding"?
When ever I pull up Activity Monitor lastfmhelper is always red and not responding. Anyone have any idea what it is and why it's misbehaving? I noticed this because my 10.5.2 iMac Core 2 Due will all of the sudden become unresponsive. When I brought
-
Appendices not auto-numbering in book
I'm using FM8. I've looked through the Forum and Knowledgebase for the past several hrs but have found nothing that helped solve my issue. I have a book that contains 9 chapters and 2 appendices. In the book, chapter numbering is set to 1 for the fir