HT1695 How to know if your router is outdated to connect to an iPad 2

How do you know if your router is too outdated to connect to an iPad2

Google it, and make sure you have its latest firmware.

Similar Messages

  • HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
    I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
    I've attached screenshots of the About This Mac section hoping it may help shed some light.
    Thank you in advance for your help!
    PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
    <Image Edited by Host to Remove Serial Number>

  • How do you get your iphone out of the connect to itunes screen?

    How do you get your iphone out of the connect to itunes screen?

    What error message is it displaying? Check this Apple support document for information on specific error messages when restoring the iPhone. http://support.apple.com/kb/ts1275

  • HT1386 How do you activate your iPod without having to connect it to iTunes? I didn't have that problem with the iPad.

    How do you activate your iPod without having to connect it to iTunes?

    If the iPod has iOS 5 you can set it up via wifi.
    What is current status of the iPod?

  • How do know when your ipod battery is bad

    how do you know when your ipod battery is bad

    Does it hold a charge? Can your device be charged? Does it have a good battery life?
    If you answered no to any of these questions, your battery is bad.

  • How to know if your internal battery has died

    How do you know if your internal battery has died without pulling it out of the computer and with out a battery tester?

    Hi, REMeeks -
    Welcome to Apple's Discussions.
    One way to do that is to make sure the date and time are correct, then shut the machine down and unplug it. Wait about an hour, then plug it in and start it up again. Check the date and time - if they are still correct, the battery is probably still good enough.
    Unplugging the machine is important - even when the machine is turned off, if it is still plugged into live power it will draw a bit of current in order to maintain PRAM and the clock chip. By unplugging it you force it to use the battery; if that is too weak, the date and time will revert to original default.

  • How to know the TNS_ALIAS of a Remote Database Connectivity ??

    Hi ,
    I have a Remote DB Connection and a Local DB Connection in my System
    I want to create the Same Table and Data From my Remote DB Connection to Local DB Connection .
    I have used
    CREATE TABLE LOCAL_TABLE AS SELECT * FROM REMOTE_TABLE@TNS_ALIAS;
    But How can i know this TNS_ALIAS of the Remote Database connection (I just jave XE under my System)

    In "... FROM REMOTE_TABLE@TNS_ALIAS"
    The TNS_ALIAS is actually a Db link and not a tns alias!
    user10503747 wrote:
    i tried everyhting but its coming as no results .What is "everything", "its" and "no results" in this context? Please explain, and don't worry about copy-paste taxes.

  • HT4528 How do you restore your phone is it wont connect?

    How do you restore your phone from apple.com/support when it is not connecting to the computer?

    you have to restore it. and you mostlikely will have to put it into recovery mode.

  • How to Port forward your router via browser

    I Am having trouble port forwarding 19132 and I tried using airport extreme to port forward but everyTime I connect using my external ip it just fails.
    i Have port forwarded the port, and I did it correctly, hence I watched a few videos before and after. so I need to know how to port forward 19132 via browser.
    i Learned how to open the the config of the router via browser, or so I thought. I need to allow google access to my network, but I don't know how.
    please help.

    This is for Apple routers which do not use browser setup.. you must use the airport utility for any setup.
    There is particular advice by the section GURU.. Tesserax on how to port forward in apple routers.
    Finding the tips is now an exercise though.
    AirPort - Port Mapping Basics using AirPort Utility v6.x

  • How to know if your hard drive needs to be replaced?

    My Compaq CQ56 laptop will not turn on properly, and I have found through some research that it may be a hard drive. I have run all of the tests in BIOS and it came back as good, but I'm not sure that it is.
    The computer will turn on sometimes, but not all the time. When I hit the power button, the power light comes on along with the WiFi light, which glows red. Sometimes the caps lock light comes on as well. The fan will run and the hard drive can usually, but not always be heard. The display stays black. I have already tried to connect it to an external monitor without success.
    The memory modules also came back as good through BIOS tests and physical tests that were suggested by an HP support article.
    If it is not a hard drive, what could it be?

     Just jumping in as , is unavailable. As I understand it, your situation improved until you had those System updates go through. At this point, I would suggest you start with a hard reset, and see if the system starts properly.HP Notebook PCs - Computer Does not Start (Windows 7, Vista, XP) If after the reset it is working then you should be good; if there is a new error state, such as flash codes or beep patterns let me know. If it starts up, but you are experiencing other performance issues, you can always try a System restore to a point before those updates went through. You just need to select a restore point before the date that the update occurred, and then test again. Using Microsoft System Restore (Windows 7)
    Let me know if this helps at all.

  • I Know Why Your Router Doesn't Work---Maybe!

    Did your wireless router recently just die for unknown reasons?  Did the computers and other items connected to it fall off?
    Question... Did you recently install the newest updates from Microsoft?  If you did, there is a real good chance that is what caused it!
    After I installed the Component Services 3.0 updates from MS, my entire network blew up!  Nothing connected, I lost my internet, etc...
    I pulled my system back with an old restore point and low and behold, I was able to get my internet back... however, I was not able to get the router to work.  After much consideration, I reinstalled the router software and tah dah, it works, and it remembered my settings.
    Don't believe me.  I just installed the Component Services 3.0 on my laptop this morning... and it lost it's internet connection too.  I created a restore point just prior to installed the Auto Updates and (boy I'm glad I did) and again, ended up restoring to the prior save.
    Good Luck... And God Bless America!
    Cheers... Marco

    kbas114 wrote:
    My this all started happening to me before I installed the latest updates from Microsoft, I only installed them thinking they might help me regain connection.
    Hi
    sometimes updates are for good , sometimes for Bad ofcourse.
    Like a two faces of coin . its true , there might be a small update in windows firewall or something which forced the first guy to loose the connection .
    at the same time , there might be some file missing or an error which was interruption the last guys internet connection which got reolved after installing the updates .
    pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • How do you update your server when its not connected to the internet?

    This is actually a Windows Update question.
    My OS is Windows Server 2008 Standard, Service Pack 2.  It is a stand alone system.
    Crazy, I know, but I want to keep my server updated with the latest security patches, Software Patches, etc., even though it will soon not be connected to the internet.  Right now it is and I am making certain it's completely updated prior to removing
    its connection.
    How would I do that?  I realize that I will have to do what "Window's Update" does, but do it manually.
    Please help! I'm new to servers and I will need this to be very much a step by step. Don't be surprised at to what I don't know at this point.  I am learning though!
    Thanks in advance.  Any and all help will be very much appreciated.

    Hi TimothyJohn,
    You either,
    - Setup a disconnected Wsus in the same LAN than your server. See Wsus documentation to see how to do that and how to update a disconnected Wsus.
    - Use a third party tool like "Wsus Offline" :
    http://download.wsusoffline.net/
    David COURTEL
    IT Technician
    Wsus Third-Party Softwares Publishing :
    http://wsuspackagepublisher.codeplex.com

  • How to setup a Linksys router as WiFi network -- connecting to Actiontec

    With horrible range using the Fios Actiontec router, I went ahead with google searched suggestion to use a second router as my WiFi network. Unfortunately, I can't figure out how to properly set up the second router to the Actiontec even with step-by-step instructions. 
    Can anyone give me step by step instructions to get the second router up and running? Please help!
    I wish to set up my second router as a new static connection so my WiFi devices may connect to that network instead of the Actiontec's. I do have Fios TV, so I need a solution that will not interrupt the other services.
    I used this set of instructions: 
    http://smallbusiness.chron.com/set-up-second-router-verizon-fios-60493.html
    I put the starting IP as 192.68.1.3
    I got up to the input New Static Connection and input 192.68.1.2 and the MAC address of the new router.
    When I press Apply, I get the message,"The IP address 192.68.1.2 is illegal for any of the connections subnets." The first time it failed, it stated that the address was used, but now I get this message every time.
    I also attempted this set of instructions:
    http://www.ehow.com/how_6127815_set-second-router-verizon-fios.html
    But I only got up to #6 where I connect to the new router and enter admin. I was unable to access the new router. My browser states that there is no internet connection.
    Note: Verizon support has been no help so far. I am at wit's end.

    These are the instructions I would use
    Can I use my wireless or an extra router along with the Verizon provided router?

  • How can I change the resolution of a display connected to my iPad 3 via VGA?

    I have been looking for this for almost an hour now. Google doesn't help and the preferences of the new iPad 3 are just crap, sorry. Why can't you search through the preferences? There's really plenty of room for improvement there.
    The display is a 1920x1200 and I only get 1024x768 at maximum, even though the new iPad 3 should be able to display way higher resolution. Sorry Apple, but this *****. What also ***** is that I can't copy my Apple-ID passwort via cmd+C and cmd+V in the browser login. Costs me 20 - 30 seconds every time I have to put it in. My time is valueable to me, but it seems not to Apple!

    Hey James, thanks for your reply. You're making a really good point there. I guess a lot of users will probably behave the way you suggest in your reply. For me, I try to have the most secure passwords possible and therefore use an advanced software like KeePassX for the job. It's a password safe that has a strong master password and from which I copy the passwords depending on the site I visit at the moment.

  • How do I access Your Music on the iPad app?

    I mostly listen to albums, not playlists.
    I used to keep all my saved albums on Spotify as playlists - but following the update I re-saved them all as saved albums under 'Your Music' (on the new desktop app for OS X) and deleted my old playlists (assuming I wouldn't need them anymore).
    This was fine on my iPhone as now I can access my saved albums under the 'Your Music' However, I then tried this on my iPad and couldn't find a way to access 'Your Music' at all?
    How do I access 'Your Music' and/or saved albums on the iPad app?

    I wrote this thread before I became a rockstar in 2013, kindly click on it and read:
    http://community.spotify.com/t5/Help-iOS-iPhone-iPad-iPod-Touch/Spotify-iPad-is-too-outdated-No-Discover-Me-amp-Others/m-p/575130#M23028
    (I wrote about the problems with the iPad long time back..)
    The rockstar role is voluntary, there's no KPIs, indexes, paycheques, you might want to read more about the rockstar programme here:
    http://community.spotify.com/t5/Spotify-Knows/What-is-the-Spotify-Community-Rock-Star-Program/ta-p/876081
    And I'm also a paying premium subscriber every month. I'm only relying information that I get from reading every single response here in the iOS forums and those that are being passed on to me by the staff.

Maybe you are looking for