HT1695 Since i upgraded to ios 6, I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?
Since i upgraded to ios 6, I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?
I sometimes experience the same issue. But not only in 6.1 but also in previous versions
Similar Messages
-
Using iPhone 4s and upgrading to iOS 6.1...my phone is losing battery life. Is there a fix? Does anyone else have this problem???
NOLAgal71 wrote:
...my phone is losing battery life. Is there a fix?
Set Up as New Device
http://support.apple.com/kb/HT4137 -
After updating to IOS8, my iPad 2, which has both AT&T cellular and wifi, needs to be completely turned off and rebooted to get cellular service. Does anyone else have this issue ?
Hi Hi Steve Giusto,
If you are having issues with Xxx_state issue here_xxX, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
HT5137
Next, I would try restarting the iPhone -
HT1430
If the issue is still present, you may want to restore the iPhone as a new device -
HT4137
Thanks for using Apple Support Communities.
Best,
Brett L ,
If you are having issues with your iPad not staying connected to cellular service, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPad -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPad as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L -
After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?
I just updated--my Camera is a disaster. Yes, I know how to turn (and position) the Camera now. However, every photo I take is UPSIDE DOWN in the Camera Roll OR Photo Stream. Even worse, a number of my Apps (Weather Underground, for example) are ALSO now upside down. Has anyone here experienced these serious orientation problems after this update? I've read the 'Manual' and its as if it doesn't exist. However, if I leave the Apple site, customer complaints about orientation abound...
This is my first time posting here about an issue (well, the same issue - I posted last week about the Camera, and no one responded). Any advice at all about how to get this corrected is much appreciated!
Thank you!
Lisa -
I have an ipod touch. I am trying to download the newest upgrade and when I do I get the same message that to do so will mean all my old inof (songs, games, apps) will be erased!? Anyone else experience this problem?
If all the synced media (such as app and music) or in your iTunes library, and if you have a backup. Go to iTunes>Preferences>Devices and check, the restore the iPod from that backup. The restore will also update the iPod.
See the following for making a backup and make one if necessary.
iOS: How to back up
mahuetter wrote:
This same thing is happening to me but i am trying to download the update on the computer i normally sync with. What should I do? -
I just upgraded my service to Extreme with Time Warner Cable and got the motorola surfboard sbg6580 modem. Now when I try to dowload any videos or TV shows on iTunes, I get an Error -50 mid download. Anyone have a solution for this? I am using a PC, not a Mac computer.
I don't want a used replacement phone when I just bought mine. I have had your "like new" replacements before for my basic phone and had a ton of issues straight out of the box, which is why I don't want one when my phone is so new and I have had issues since day 1! Not once on my several calls to tech support, did anyone tell me to go exchange it the first 2 weeks. That is just one reason they want to send me a replacement. Another is the USB does not work properly, I can't use it to do anything but charge the phone- and my husband has the same phone so I know is not the cord or the computer because his works perfectly. The connection was sporadic so I just installed a new SIM card. So far that has helped with dropping 4g all the time. I have never been able to back up my contacts, spent 2 hours on the phone with tech support the first night I got it just trying to sync the contacts from my old phone. It never worked, I had to hand input the numbers. If Verizon won't do right by be and give me a new phone, I at least would like them to get mine working like it should have when I bought it.
-
Problem with remote desktop client update
I find it interesting that since Screen Sharing is available, and works "just fine" that a Remote Desktop Client would be needed to be installed.
I installed it, but I'm not sure why.
I found the updated application in /System/Library/Core Services/RemoteManagement/ARDAgent
Which is also where the screen sharing and vnc bundles live. I clicked on it to see what would happen -- nothing.
I found these ports in another discussion
TCP and UDP port 3283
TCP and UDP port 5900. (Also used for Screen Sharing in OSX 10.5 and later)
port 22
This page confirms their use along with the use of other ports:
TCP and UDP ports used by Apple software products - Apple Support
Additionally TCP port 5432 is used by ARD
Having recently noticed (through "network utility" that my computers have had a "ton" of open connections.
This severely hurt system performance.
I note that neither my Airport Express nor my Mac can set up a firewall on these ports.
While I haven't noticed the ARD ports being used, I cannot help but wonder if this is set up for a CIA/NSA backdoor into my computers.
On a less paranoid level, perhaps Apple is planning on adding on-line help to debug our problems in "real-time". ;-) -
I saw an update was available and trusted without exploring what was involved. Now all applications are running
slow including anything having to do with the internet. Can I uninstall the update?Start up in Safe Mode. Connect to your router with an ethernet cable, as your wifi may not work, and apply the 10.8.4 Combo update.
-
iTunes Match states PC requirements is iTunes 10.5.1, but my PC states I need to have windows 8 to use Match or access it on PC. Any way around this?
Anyone?
-
Since upgrading to iOS 8 , my Apple TV second gen stops playback every time my iPhone rings. Anyone else have this happen?
This is happening to me too. Couldn't figure out what was happening at first then I got a phone call and the ring came through the appletv. Playback was stopping when I would open a game or something else as well.
I'm on a 5s with ios 8 and have an appletv 3rd Gen(it is updated too). II often airplay movies from my NAS through my iPad min and that stops when something happens on my phone even though airplay on my phone is off. -
I updated to iOS 8 on my iPhone 5 yesterday and now when I press the home button even once, it opens the app switcher (which is supposed to only open after pressing the home button twice quickly). Sometimes pressing the home button once even brings up the assistive button (which for me should take three button presses). This did not happen before I updated my software. Has anyone else had this issue? Know how to stop it? Very annoying and at this point feel like I should have waited before I did the update.
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
Since upgrading to Snow Leopard yesterday, twice I've been unable to get my screen saver to release back to my working desktop. Anybody else have this issue?
For a few users, since some point in OS X 10.6 Snow Leopard, there has been an occasional problem when trying to wake from sleep if you have Bluetooth enabled for the keyboard, Magic Mouse, Trackpad, etc.
The solution for me that worked 100% of the time was: System Preferences>Energy Saver and set 'computer sleep' to 'never'.
For me, the problem ran intermittently through 10.6.something, all of 10.7 and now, finally, seems to be resolved in 10.8.2. -
Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?
I have been researching the exchange message loss problem on other forums, but not seen a link to browser as yet. The message loss problem we have here is in a 32bit PB.
-
I just finished my multi-device upgrade to iOS X. Now, Keynote freezes and is basically dysfunctional. Anyone else have this problem?
What did you upgrade? There is no such thing as iOS X, there is iOS and OS X. iOS is for iphones, ipads, and ipods and OS X is the Mac operating system.
-
Own two iphone 5s with ios 7.0.2 loaded. Both phones do not allow camera video to start. Anyone else with this issue? Any suggestions how to correct?
Hello markittwo,
Thank you for details about the issue you are experiencing with recording video after upgrading to iOS 7.
The first thing I recommend is quitting and relaunching the applications on your iPhones:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/HT5137
If you are still seeing the same issue after quitting and relaunching the Camera app, I recommend restarting your phones and then resetting if recording video still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhones:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
How to validate a date in message mapping
Hi experts, how to validate a date in message mapping. For ex: if date comes as 2008/02/31, then file it shold not get processed.how to achieve this in message mapping. Please help . Thanks&Regards, Reyaz Hussain
-
Error when installing Adobe Update
I am trying to install the latest version of Abode Flash Player. I received an error that I don't have sufficient priviledges to install it. But, I am currently an adminstrator on the computer with the right to install anything on the computer. Is
-
Ok, so I have this email that I tried to send around a month ago, but I forgot to enter a recipient email address, and now the stupid email won't leave me alone. Every time I open mail it opens up and a message pops up that says "The outgoing mail se
-
Is there any way in Solaris 10 to create a bootable backup tape like "mksysb" in AIX or "make_recovery" in HP-UX. I looked through the commmands and didn't see anything at first glance.
-
Infotype 0002 persional ID not updating
I need to update persional ID. i Used transaction PA30, Enter infotype number 2 or select Personal Data (0002) on the Personal Data tab You can use any <b>Malaysian</b> employee # Click on change button Enter in an ID number. Click either the enter o