HT1766 I HAVE IPHONE4 AND I DO NOT SEE THE ICLOUD ICON IN THE GENERAL AREA -SETTINGS? HOW DO I INSTALL OR AVAIL THIS ICON TO MY PHONE?

Can you plse direct me to where i can see the insert image? when i click camera icon it does not have this option

Requires iOS 5.0 or higher. You need to connect your phone, iTunes running, and on the Summary Pane, hit the "Check for Updates" button. iOS 6.0.1 will be installed on your phone. BACKUP FIRST! Make sure ALL of your data is on your computer BEFORE you update.
You'll then have iCloud.

Similar Messages

If you have iPhone4 and can you take out the sim card from iPhone4 and transfer it in to new iPhone4s?

if you have iPhone4 and can you take out the sim card from iPhone4 and transfer it in to new iPhone4s?

Under the circumstances this will probably considered a dumb question.
I currently have a jailbroken unlocked 3GS with a GoPhone plan. Works great. I am considering upgrading to a new factory unlocked 4S. Will I be able to swap in my current SIM card and go?

Goo night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

Good night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

Good morning,
Thanks for your message, the versions are LR 5 and PS6
2015-02-24 21:31 GMT+00:00 John Waller <[email protected]>:
Goo night, I have Nikon D810, and i can not see the raw photos on
lightroom and Ps, could someone help me? created by John Waller
<https://forums.adobe.com/people/John+Waller> in Photoshop Lightroom - View
the full discussion <https://forums.adobe.com/message/7226636#7226636>

HT5312 I cannot remember the answers to my security questions and I do not see the option to email the answers to my rescue email, although I know I have one. What do I do?

I cannot remember the answers to my security questions and I do not see the option to send it to my rescue email, although I know I have one. What do I do? I cannot use my account for iTunes until I answer the questions and I recently got $50 of iTunes from my parents. HELP!!

Are you sure that it's a rescue email address (it's not the same thing as an alternate email address) ? If you do then you should be able to go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

TS3999 I have a macbook Pro which had Mobileme. I have joined ICloud, but my Calendar does not sync. How do I fix this? I do not see an ICloud Icon on my laptop and the software is updated.

I have a macbook Pro which had Mobileme. I have joined ICloud, but my Calendar does not sync. How do I fix this? I do not see an ICloud Icon on my laptop and the software is updated.

This is the situation with Snow Leopard and existing iCloud accounts:
You will be able to access email and calendars on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point.
Address Book won't sync: this page has a convoluted hack to make it sync which has been reported as working (and as not working by others). I've not tried it.
There are a couple of alternative syncing services you might like to consider, though they're not particularly cheap:
Soho Organizer can sync Calendars and Contacts with iCloud on Leopard, Snow Leopard and Lion. A single user licence (multiple machines allowed) is $99.99.
Fruux syncs Calendars, Tasks and Contacts beetween a wide variety of devices (not using the iCloud server) including Snow Leopard and above, Windows Outlook and Thunderbird, Linux Thunderbird, and iOS and Android devices - see their compatibility chart (click the blue 'i' for a caveat about Snow Leopard). It's free for one user, two shares, two devices; above that pricing starts at €4 per month.
(I have no connection with these firms and have not tried Soho Organizer, though both have had good reports and I've found Fruux to work well.)

I am trying to remove a card and i do not see the none button , how do i remove it from my iTunes

i am trying to remove a card and i do not see the none button , how do i remove it from my iTunes

The following support documents have some information that may help:
See the section titled "Change your payment information on a Mac or PC" http://support.apple.com/kb/HT1918
If you still cannot select "None" http://support.apple.com/kb/TS5366

Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

I have AI CS6 but do not see the option to Package a file. I do not see under File the option for Package

I have AI CS6 but do not see the option to Package a file. I do not see under File the option for Package

Thank you for the response. The AI Help did not indicate it was a Cloud
only feature but that makes sense.
Thanks again
Art Needleman
Division of Visitor Services
National Wildlife Refuge System
500 Gold Avenue, SW / Room 4501
Albuquerque, NM 87102
505-248-6822
The question is not what is the sound of one hand clapping but who is
making that sound. -- C.A.
On Thu, Jun 12, 2014 at 10:03 AM, Larry G. Schneider <

I made an error asking to receive Windows product of Adobe Element 13 and Premiere while I needed the Mac Version. How is it possible to correct this error ? and what do I have to do if you accept ?

I made an error asking to receive Windows product of Adobe Element 13 and Premiere while I needed the Mac Version. How is it possible to correct this error ? and what do I have to do if you accept ?

Normally an Elements license is valid for both Windows and Mac systems. So you might only need to download the Mac versions of the applications and use your serial number to activate them.

When I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this

when I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this?

Carolyn Samit has answered this question before. I did it with this info. Thank you Carolyn for your awesome help.

HT201304 ello my little brother has developed lock my iPhone and I could not see the unlocking code Please help and thank you

Hello
ello my little brother has developed lock my iPhone and I could not see the unlocking code Please help and thank you
edited by host

Hi Omar_a983,
If you are having an issue with the passcode on your iPhone, you may find the following article helpful:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
- Brenden

My code panel has an entirely black background and i can not see the coding how can i correct this?

my code panel has an entirely black background and i can not see the coding how can i correct this?

cs5 , windows, i don't even know how it changed? and yes all files but after 3 hrs burned here at work i figured it out:
Before:
click the format source code button
Preferance panel will show up>code coloring>Default Background
Correct:
Thank you for your reply
Message was edited by: Graphixqueen1

I want to install a new Time Capsule for backups. I also have a B box2 from Belgacom for the digital TV, so how do I install?

Hi,
I want to install a new Time Capsule for backups. I also have a B box2 from Belgacom for the digital TV, so how do I install?

Just setup the TC in bridge.
Assuming you are using Lion.. download the airport utility that has some utility.
http://support.apple.com/kb/DL1482
Then manual setup, internet tab, connection sharing.. off bridge mode.
Then plug the TC into the Bbox and just use it as wireless target for your air.
You can use wireless on Bbox if that works as well, and you might need to juggle wireless channels to get everything working. Having both set to auto is not a good idea.. set and lock channels on one or the other but best is both.. On the TC go to the airport wireless page. change it to manual.. lock the channel. You can use 1, 6, 11 or 13 in ETSI..

TS3230 i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?

i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?

You need to uninstall the Community / Conduit toolbar add-on.
Locate the files in bold print and move them to the Trash. The first five are in your root /Library
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/ScriptingAddtions (anything CTLoader realted)
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
The next one is in your Home folder.
~/Library/Application Support/Conduit
When you're done, try Safari.

HT1766 I HAVE IPHONE4 AND I DO NOT SEE THE ICLOUD ICON IN THE GENERAL AREA -SETTINGS? HOW DO I INSTALL OR AVAIL THIS ICON TO MY PHONE?

Similar Messages

Maybe you are looking for