HT1925 Hi, I cannot access my iTunes as it says Quicktime was not found. It advises me to un-install and then re-install iTunes but I am afraid I may loose everything as it hasnt been backed u since 2012. Any advice? Thanks

Hi, I cannot access my iTunes as it says Quicktime was not found. It advises me to un-install and then re-install iTunes but I am afraid I may loose everything as it hasnt been backed u since May 2012. I can access iTunes on my iPhone but the error message comes up when I try to access this on my desktop. Any advice? Thanks a mill

Uninstalling iTunes and reinstalling should not affect your library. You should backup anyway.
tt2

Similar Messages

  • ITunes won't load, it says Quicktime was not found. QuickTime is required to run iTunes.

    iTunes won't load, it says Quicktime was not found. QuickTime is required to run iTunes. Please uninstall iTunes, then install iTunes again. I have done this several times and it keeps showing me that Quicktime is unavailable even though I redownload it every single time.

    Try this
    https://discussions.apple.com/message/16022028#16022028

  • ITunes doesn't open, box says "QuickTime was not found."

    My iTunes won't open, the box say's "QuickTime was not found. QuickTime is required to run iTunes."
    Help!

    Try this
    https://discussions.apple.com/message/16022028#16022028

  • Itunes won't open because it says Quicktime was not found?

    When I click to open Itunes, first this message pops up: The procdedure entry point QTCF_CFHTTPPMessageSetHeaderFieldValue couldn not be locate in the dynamic link library QTCF.dll.
    Then i click OK and the same message pops up, and then another one pops up saying: Quick Time is not found.  Quicktime is required to open Itunes.  Please uninstall Itunes, then install it again.
    Except I checked, and i DO have Quicktime.  So I uninstalled Quicktime, and installed it again.  I opened iTunes and ir won't work.  So I uninstalled iTunes and then installed it again.  Still doesn't work...

    If you definitely have a working QuickTime but iTunes thinks that you7 do not, then this points to a particular type of error.
    Do you have a computer that has been set up for a work network? You may find that iTunes works OK when the computer is connected to the network but doesn't at home when not connected.
    There are other possibilities, but this is a common one.
    If I have guessed right, the problem lies in the %path% environment variable. In order to look at its contents, could you do the following:
    Type:
    cmd
    into your search box and click cmd under Programs.
    The black cmd window will open.
    Next copy&paste the following into the cmd window and press return:
    echo %path% >documents\path.txt
    This will place the contents of the %path% variable in a text file called Path in (My) Documents.
    Could you copy&paste this text file into your next post so I can look at it.
    (Use ctrl V to paste into the editor, right click doesn't work.)

  • Tried to update my i phone 4s, now the phone isnt going on unless i restore to factory settings. The screen is just showing a usb and arrow to I Tunes, it also says if i restore i will lose all media, which hasnt been backed up recently. Any answers?

    tried to update my i phone 4s, now the phone isnt going on unless i restore to factory settings. The screen is just showing a usb and arrow to I Tunes, it also says if i restore i will lose all media, which hasnt been backed up recently. Any answers?

    It's in recovery mode. Anything that was on the phone and not already backed up is already gone.  You have no choice but to restore.

  • Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    Can you start QuickTime on your computer?
    You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

  • Cannot Connect to the iTunes Store. Request Resource was not found

    I hope you can help me.
    I get the following error when trying to connect to the iTunes store.
    iTunes could not connect to the iTunes store, the requested resource was not found.
    I am running Norton Internet security and have allowed all permissions for iTunes.
    Following is the diagnostics log:
    Thanks,
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Latitude D820
    iTunes 7.1.1.5
    Current user is an administrator.
    Network Adapter Information
    Adapter Name: {21F2991F-5976-4BE0-8031-064BC7AC9AF0}
    Description: Intel(R) PRO/Wireless 3945ABG Network Connection - Minipuerto del administrador de paquetes
    IP Address: 192.168.2.26
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.2.200
    DHCP Enabled: No
    DNS Servers: 192.168.2.25
    168.243.165.225
    Adapter Name: {CB99A2BD-1A04-482A-BC5C-53E5597BA70B}
    Description: Broadcom NetXtreme 57xx Gigabit Controller - Minipuerto del administrador de paquetes
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server: 192.168.0.1
    Lease Obtained: Mon Feb 12 11:09:06 2007
    Lease Expires: Tue Feb 13 11:09:06 2007
    DNS Servers: 192.168.2.25
    168.243.165.225
    Network Connection Information
    Active Connection: Conexión LAN
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was unsuccessful.
    A secure network connection could not be established.

    Has anyone actually tried this suggestion posted by jeffporfiro's. He seems to be posting in any topic related to iTunes Store connection probs.
    Is there any credibility to his suggestion? (below)
    <<jeffporfirio wrote:
    Solution is as follows:
    Goto your C:\WINDOWS\system32\drivers
    find a file named “hosts”, mine was located in a directory named “etc” under the “drivers” directory, rename the file, to something other than its name (eg. rem-old.host) and done ! >>

  • ITunes 9.2.1.5. will not open - ERROR "QuickTime was not found"

    After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists. I have been able to open iTunes when re-installed but when syncing to the iPhone 4 even the unchecked music syncs. when I reboot I cannot open iTunes again(ERROR "QuickTime was not found")
    Someone please help. I am running Windows 7 Ultimate on a Lenovo R500
    Thanks In Advance.

    After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists

  • Problems opening iTunes after installation - "QuickTime was not Found"

    I am having trouble opening iTunes. Both iTunes and Quick time will download and install and I can open QuickTime without a problem, but when I open iTunes, I get the following error:
    Open iTunes and an error opens:
    "QuickTime was not found. QuickTime is required to run iTunse. Please uninstall iTunes and then install iTunes again."
    I only have trouble when I am at home and not connected to my work network. I was able to start iTunes yesterday while in the office, but all my music is on my external hard drive at home. Not helpful!
    I have tried about everything - uninstalled, reinstalled itunes and quick time, disabled bonjour, disabled the startup files, etc. I am still not having any luck.
    Any suggestions?

    Both iTunes and Quick time will download and install and I can open QuickTime without a problem, but when I open iTunes, I get the following error:
    A bit unusual.
    Did you do the QuickTime/iTunes install at work?
    Is QuickTime still launching when you get the PC home?
    (Wondering if something relating to the network at work have done odd things to QuickTime or iTunes registry entries ... possibly iTunes is looking for QuickTime on the wrong drive when you get the PC home, for example.)

  • I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)"....

    I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update

    I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and  some people said that they worked.
    Here is the original Link:
    https://discussions.apple.com/thread/2151777?start=0&tstart=0
    OK, this worked for me:( Original Post by r0tt3n4pp13)
    1. Save iTunes install file to your desktop.
    2. Disconnect from internet.
    3. Disable Firewall/Security software.
    4. Run install. Note that it installs Application Support and a bunch of other software this time.
    5. Run iTunes.
    6. Enable Firewall/Security software.
    7. Reconnect to internet.
    8. Download Watchmen Director's Cut post haste.
    OR!
    (Original post by Cr4z33)
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.

  • Apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2

    I can't install itunes for windows 7 to 64bit i tried several times and at the end show up this...
    "apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2" ..so what it does mean? ..can somebody help me for this please? thanks

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

    apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

    You can try installing 7-Zip (free), then right-click on the iTunesSetup.exe or iTunesSetup64.exe file to unpack its contents, and install AppleApplicationSupport.msi as a standalone component. It may still not install successfully, but if it doesn't you may get a more useful error message regarding the reason why.
    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • SCCM Install fails. cannot connect to SQL server. "the network was not found"

    Hi,
    I'm installing SCCM 2012. i have a 2 server boxes. 1x sccm and 1x dedicated SQL. sccm installation is stuck @ connecting to DB.
    SQL server is 2012 with SP2, static 1433 port used.installation account used is already sysadmin, sccm computer account also added into SQL local admins. ports 1433, 4022, 445 are already FW open in between SCCM box and SQL Box?
    error pop up" "the network was not found"
    Pls advise.

    if MS is really doing good job then such things (scCm on remote sql) should be easy for us with proper docs. Cheers!
    The docs are "proper". They give you all the technical details needed. They assume however that you know how to translate the stated requirements, like the ports necessary (as documented at
    http://technet.microsoft.com/en-us/library/hh427328.aspx ), into the environment you are working in. They cannot give you a click by click guide because that would only be applicable to
    generic lab environments.
    Sorry that that may sound a bit harsh, but it is reality. They simply have no idea what customer networking environments actually look like as the possibilities are simply unbounded. They must rely on the implementer being able to take the core technical
    requirements and implement them for the uniqueness of the environment they are working in. In most cases, this is generally straight-forward, but there is a great deal of variety in the real-world.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Whilst downloading new version 11.1.4.62 yesterday Itunes stopped working and I now get an error message MSVCR80.d11 was not found. I have uninstalled I tunes and reinstalled it and Ihave also taken the recommned patch to recover the MSVCR problem.

    I was using my Dell PC (Windows Vista) on the 24th January 2014 and I was lstening to music via my Itunes programme. a window appeared alerting me to the need to take the new 11.1.4.62 Itunes update.
    I should have stopped Itunes and then installed the updated programme but absentmindely I cliked on the upload icon.
    Everything carried on as normal unitl around 70% the way through the upgrade when Itunes stopped working.
    An error message appeared 'Itunes Helper exe - Unable to locate component. This application has failed to start because MSVCR80.d11 was not found.' i was advised to uninstall and reinstall Itunes as that may fix the problem.
    It didn't!
    I then researched this issue on Google and was advised that if the reinstall of Itunes didn't resolve the issue I should download and install Microsoft Visual C++2005 Service Pack 1 Redistributable Package MFC Security Pack and run it. Did this and reinstalled Itunes again. Still doesn't work.
    Where next?

    Yes I have had the same problem today. Wish I had`t bothered to carry out update as everything was ok before.

  • Error after install iTunes setup: Apple application Support was not found

    Hello,
    I am trying to install iTunes on my pc. During the downloading of iTunes setup.exe i get this error:
    Something went wrong during the installation of this item. Microsoft. VC80.CRT, type="win32", version="8.0.5072.7.6195", publicKeyToken="lfrc8b3b9a1e18e3b",process or Architecture=x86"
    I choose 'ok' and the download continues. When the download is complete and i try to open the iTunes setup its given the error saying:
    Apple Application Support was not found
    Apple Application Support is required to run iTunesHelper. Please uninstall iTunes then install iTunes again.
    I tried this more than once, but its not working. I also tried to extract the iTunes setup.exe with winrar and then to do an install with appleapplicationsupport.msi, but its given the same error.
    Anyone please has some advice?
    Thanks in advance!
    Marieke

    When I look at my control panel the only program that shows is "I Tunes".  No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
    That's an extreme case of this.
    We'll try doing standalone installations of all the supporting programs.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone Apple Mobile Device Support install.
    Doubleclick the AppleSoftwareUpdate.msi to do a standalone Apple Software Update install.
    Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
    Do those four installs go through okay? If so, does your iTunes launch without any errors now?

Maybe you are looking for

  • X200 Fan Issues with Windows 7

    Hi all, I've just done a fresh install of Windows 7 Ultimate 64-bit onto my X200, and everything works great except for 1 thing - the fan constantly runs and doesn't stop at all as long as the laptop is on. I've seen a few other posts of other X200 o

  • Map_request not using size_hint

    Hi, we'd like to query mapviewer using an xml map_request. The output is supposed to use some sort of a fixed zoom. To achieve this we tried to use the size_hint parameter with a bounding_theme. <?xml version="1.0" standalone="yes"?> <map_request dat

  • Outlook integration customer master (VD02) possible

    Hallo everybody, it seems to be possible to integrate business partner into MS outlook contacts using SAP business ONE or using CRM (with groupware integration). Is this functionality also possible using ERP 2005 (not CRM)?? And if yes how can I do t

  • New ipod won't make a library on  my Windows ME comp.

    what should i do to get it to work?

  • JMF experts, please help!

    Hello I'm trying to write a program which should play a mp3-file. The problem is that I get a strange error message. The program works for ".wav" and ".mpg"-files but unfortunately not for mp3. I list the code for the program and the error message...