HT1925 How do i factory reset an i pad 2 that is linked to some ones elses icloud to activate the i pad ? With the upgrade Ios7.0.4

How do i factory reset an i pad 2 that is linked to some ones elses icloud to activate the i pad ? With the upgrade Ios7.0.4

Hi DopeeBoii,
It sounds like you may be having issues with Activation Lock in iOS 7; you may find the following article helpful:
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/ht5818
Regards,
- Brenden

Similar Messages

How to set a list form field data value that is linked to another document library's data when the link gets broken!!??

In summary, I have created 3 document libraries and one issues list in a site collection.
The issues list has a form that has mainly been created in SharePoint 2010 but tweaked in InfoPath 2007 and one of the fields links to the title of a document in the first document library (so an issue can be linked/referenced to a particular document).
This all works great until I want to move a document (using the workflow that I built) from document library 1, to document library 2 or 3 as this is what I've set up to move documents through the business process we are taking it through.
When this happens, the link between the issue that was raised originally against the document is broken and therefore you can no longer tell which document the issue is linked with.
Does anyone know a way of 'setting' the field that is linked to data in another document library on original selection/creation of the issue, so that when the link is broken the original data remains.
Any ideas welcome as I am stomped!!!
Cheers!!
Louis Maxwell

Hi Louis,
According to your description, my understanding is that you want to keep the link field of the issue list working after moving the linked document.
Whether the link field is a lookup column or not ?
If so, due to the information source of lookup column cannot be changed, you need to add other lookup fields for document library 2 and document library 3. Just one lookup column corresponds one document
library. Then you can update the lookup column in the workflow when move the linked document. Such as when a document is moved to document library 2, you need to clear the lookup1 field (corresponding document library 1) and update the lookup2 field (corresponding
document library 2).
For updating the lookup column, you can refer to the following actions:
Best Regards,
Eric
Eric Tao
TechNet Community Support

How do i factory reset my phone to get rid of the previous owner?

how do i factory reset my phone to get rid of the previous owner? I got this from a neighbor cause he upgraded to a iPhone 5 and gave me his iPhone 4 and I can not do anything as it wants his password to do any downloading for voxer or itunes i can do anything on there but download so he said i have to factory reset it how do i do that i am a totally stumped on this
can anyone help me

Look harder...
Settings -> general -> reset -> erase all contents and settings.

How do you factory reset your ipod once itsbeen disabled

how do you factory reset a ipod touch once its been disabled?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How do i factory reset

how do i factory reset

It all depends on which phone you have. If you have the LG phones, you tap on menu and then on Settings>Storage. Scroll down to Personal data and you will see Factory Reset. If you own a Motorola, you want to tap on Settings>Privacy and you will see Factory Data Reset. You know that all the information stored on your phone will be erased and you have to start all over. You have to get a Google account (unless you already have one), set up all your Email accounts, etc. Everything on your SD card should; however, not be effected. Unless you absolutely have to do a factory reset, I advise against it, especially if you downloaded a lot of apps from the store.

How do i factory reset and ipad given to me

how do i factory reset an ipad given to me as a gift

http://ipad.about.com/od/iPad_Guide/ss/How-To-Wipe-Your-iPad-And-Erase-Data.htm
 Cheers, Tom

How do you factory reset a iphone 4s if it dont work in the setting

how do you factory reset a iphone 4s if it dont work in the setting

vic17santos wrote:
how do you factory reset a iphone 4s
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...

How to completly factory reset it

my friends changed all IDs and paswords as well as disabling it. how can i factory reset it completly?

http://support.apple.com/kb/ts3694#9006
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

How do you factory reset macbook

My friend has just bought a shop display macbook laptop from Duty Free Sales at Bristol Airport for her daughter. They put password in to prevent customers playing with it. She cannot get answer from shop as to what password is and unless she flies out again security will not let her through to the shop. How can she do a factory reset please? She doesn't have a Leopard disk
Thanks
Rick

Rick - you should get the install discs from the seller. As ypw mentioned, you can reset the password using those.
The following instructions you should use with caution, as it requires booting the computer into single user mode.
Otherwise, with the computer off you could hold down Apple Key and S and turn the computer on.
It will boot into single user mode - command prompts. You will then have to mount the disk, the instructions are provided at the last second, but it's the command fsck -y then the command mount -uw /
Once mounted, type passwd and it will ask you to enter the new password. You could also run passwd <username> (insert the username there).
By running the first option, that will enable the root account and set the password to whatever, therefore to login you would enter the username root and the password you supplied.
Be careful not to mess with much, and once you use it try to get the leopard disc and do a reinstall of the OS when you get home.

HT1430 how do i factory reset my ipad without the having the login password

how do i factory reset my ipad without the having the login password

You force your iPad into Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

How to add a checkbox to dynamic itab so that i can select some records

How to add a checkbox to dynamic itab so that i can select some records in the alv and can display them in another alv using a button
I have requirement where i have to display the dynamic itab records in an alv ....Some records from this alv output has to be selected through checkbox provided in the first column .( I will get to know the structure of the itab only at runtime ,so iam using dynamic itab)

Hi,
   I tried and finally i got it , Just try for it.
type-pools : slis.
PARAMETERS : p_tab type dd02l-tabname.
data : ref_tabletype type REF TO cl_abap_tabledescr,
       ref_rowtype TYPE REF TO cl_abap_structdescr.
field-symbols : <lt_table> type   standard TABLE ,
       <fwa> type any,
       <field> type abap_compdescr.
data : lt_fcat type lvc_t_fcat,
       ls_fcat type lvc_s_fcat,
       lt_fldcat type SLIS_T_FIELDCAT_ALV,
       ls_fldcat like line of lt_fldcat.
data : ref_data type REF TO data,
        ref_wa type ref to data.
ref_rowtype ?= cl_abap_typedescr=>DESCRIBE_BY_name( p_name = p_tab ).
TRY.
CALL METHOD cl_abap_tabledescr=>create
EXPORTING
    p_line_type = ref_rowtype
receiving
    p_result     = ref_tabletype.
CATCH cx_sy_table_creation .
write : / 'Object Not Found'.
ENDTRY.
*creating object.
create data ref_data type handle ref_tabletype.
create data ref_wa type handle ref_rowtype.
*value assignment.
ASSIGN ref_data->* to <lt_table>.
assign ref_wa->* to <fwa>.
loop at ref_rowtype->components ASSIGNING <field>.
ls_fcat-fieldname = <field>-name.
ls_fcat-ref_table = p_tab.
append ls_fcat to lt_fcat.
if lt_fldcat[] is INITIAL.
    ls_fldcat-fieldname = 'CHECKBOX'.
    ls_fldcat-checkbox = 'X'.
    ls_fldcat-edit = 'X'.
    ls_fldcat-seltext_m = 'Checkbox'.
    append ls_fldcat to lt_fldcat.
endif.
clear ls_fldcat.
ls_fldcat-fieldname = <field>-name.
ls_fldcat-ref_tabname = p_tab.
append ls_fldcat to lt_fldcat.
endloop.
loop at lt_fldcat into ls_fldcat.
if sy-tabix = 1.
    ls_fldcat-checkbox = 'X'.
    ls_fldcat-edit = 'X'.
modify lt_fldcat FROM ls_fldcat
    TRANSPORTING checkbox edit.
endif.
endloop.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog           = lt_fcat[]
IMPORTING
    ep_table                  = ref_data.
assign ref_data->* to <lt_table>.
select * FROM (p_tab) into table <lt_table>.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   IT_FIELDCAT                       = lt_fldcat[]
TABLES
    t_outtab                          = <lt_table>.
Thanks & Regards,
Raghunadh .K

How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

How can I get a reference to all controls on a front panel of one type )for example of the type Text Ring?

I'd like to set the strings[] property of all the Text Ring controls on a front panel at once without creating a property node for every text ring. How can i do that?

> How can I get a reference to all controls on a front panel of one type
> )for example of the type Text Ring?
>
> I'd like to set the strings[] property of all the Text Ring controls
> on a front panel at once without creating a property node for every
> text ring. How can i do that?
This is likely more complicated than making property nodes for each
ring, but you can do it. Make a subVI that takes in a panel reference,
reads the array of control references, loops through them looking for
rings, and modifying the Strings[] property on each ring.
The part of this that will probably be the least obvious, when you
have an array of control references there are two ways to find out
if an element is a ring. You can read the classID and compare it
to the cla
ssID of a true ring control. An alternative is to cast
the control reference to a ring control using a Cast to more specific
node and wire the error out to a case structure. The error case is
where the objects that aren't rings will go. The success case case
where you will have a valid ring refnum that you can use to modify
the strings.
Greg McKaskle

HT4859 i have reset my password and i dont have wifi to connect to my ipod and activate the steps in the i cloud process, now i want to know that will all my videos , photos and music will lost if i connect to my computer if storage and backup is in off m

i have reset my password and i dont have wifi to connect to my ipod and activate the steps in the i cloud process, now i want to know that will all my videos , photos and music will lost if i connect to my computer if storage and backup is in off mode

If iCloud Backup is set to Off in Settings>iCloud>Storage & Backup, it means that your iPod will not automatically back up to iCloud, but will automatically back up to your computer when you sync. The only way you would risk losing data is if you have never synced with iTunes before. If that's the case, you have to take special precautions to avoid losing data, as outlined in this user tip: https://discussions.apple.com/docs/DOC-3141.

How do i transfer recorded audio from my ipad2 that is in a quickvoice app to my imac if the audio size is to big to email

how do i transfer recorded audio from my ipad2 that is in a quickvoice app to my imac if the audio size is to big to email

Does quickvoice show up under shared documents when connected to iTunes. you could transfer it that way. Connect to iunes and then select your device and choose apps along the top and scroll down and see if it is there under file sharing.

HT1925 How do i factory reset an i pad 2 that is linked to some ones elses icloud to activate the i pad ? With the upgrade Ios7.0.4

Similar Messages

Maybe you are looking for