HT1926 error writing to file:C:\Programfiles\iPod\bin\iPodservice.resources\nb.lproj\iPodServicesLocali zed.dll. I get this message when trying to install the newest version of iTunes 11 after I uninstalled iTunes to try and fix a sync prob on 4s. any Sug
While trying to reinstall newest version of iTUNES 11 (on win7) after uninstalling itunes in hopes of resolving a sync issue with iPhone 4s. It asks to verify that i have access to above file so i hit retry and it pops sqme message up instantly. I hit cancel and it rolls back action and asks to finish install. I confirm and it tells me that Errors occurred during install before itunes could be configured. Then it says system has not been moddified. to complete the installation run the installer again. I have done this many times and get the same result..... Any suggestions for me?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Similar Messages
-
How Do I correct the above?
You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin
-
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.
Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126). Any help would be appreciated. Using Windows 7 enterprise on an hp Z600
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator. Help!!
Don't know if this will you but i fixed my issues with upgrading to 10.5.3.3 on Windows 7 you can access the steps i took here with an explanation of the problems i was having. https://discussions.apple.com/message/17374864#17374864
-
When trying to download the newest version of iTunes I keep getting error 2343
When trying to download the newest version of iTunes (11.0), I keep getting the error code 2343.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99220) -
Why do I get an "invalid signature" message when trying to download the latest version of iTunes? Apple Support is the lamest excuse for support I have EVER seen.
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I'm trying to install the newest version of iTunes but it's saying the version i have isn't new enough for me to update it. This makes no sense to me... how do I get the newest version?
I Think it is telling you your computer operating system is too old for the newest update.
What are you running? -
I'm trying to download the newest version of iTunes onto my windows computer and it keeps saying it cannot find 'iTunes.msi' program in my files. How do I fix this?
I would try removing and reinstalling all the Apple software by:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Next try posting in the iTunes forum. -
I have just tried to instal the latest version of itunes. It failed and I got a message saying ' An application has made an attempt to load the C runtime library incorrectly' I completely uninstalled itunes and tried to install an earlier version and got the same message. So I can no longer access my itunes files. Help
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
After I clicked and downloaded the newest version of itunes I no longer am able to connect with the store. I get an error (-32-12) and it says to check the connectivity. The problem is with the on line connection. I attempted to reload itunes , still the same problem exists.
... and that's a new one that I wasn't expecting ...
Okay ... lets try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I am trying to install itunes as i had to uninstall the software. and now when i try to reinstall it i keep getting this message. I dont understand why? or how to fix it. It shouldnt be this difficult to install a program. All this just because of some upgrade that wouldnt install and messed up itunes and made it invalid to even open.
Hey AndreaKK,
I would try the following directions:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you have Windows XP, there are slightly different directions in here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
Welcome to Apple Support Communities!
Regards,
Delgadoh -
Error message when trying to install the trail version of Photoshop
I get an error message whenever I try to install the trail version of Photoshop? Any help?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
My Itunes wouldn't acknowledge my new Ipod, so i uninstalled it (older version) and now I'm trying to install the newest version. I'm getting this error.
"An error ocurred during installation of assembly. "Microsoft. VC80.CRT type="win32. Version="8.50726195". publickeytoken="1fc8b3b9a1e18c3b" processor architechture="x86." Please refer to help and support for more information. Hresult=0x80070002
I an stumped.....I Think it is telling you your computer operating system is too old for the newest update.
What are you running?
Maybe you are looking for
-
Uncatchable exception: BSP calling Function Module
Hi all, currently i'm facing a very weird problem. My application class calls function module HR_INFOTYPE_OPERATION. Normally, in case of an error, the function module gives you back a return parameter. But if i call it from my BSP, the processing do
-
Does WCS run on Windows 2008 R2 server?
Can anybody share his/her experience with running WCS on Windows 2008 R2 server? Is it possible and did you experience any problems with it? (during installation or during normal usage) Is it supported by Cisco already? Our distributor is a little bi
-
AVI Files in 10.3 and 9.2
Okay, I have a samll collection fo AVI files on my ibook. I have installed both codecs for OS 9 and X onto the Hard Drive. The videos are crisp in OS 9 when loaded onto the hard drive. Yet, some tends to drop frames in OS X. I have already maxed out
-
"1 item" and pointed finger inside message box. Is there a fix for this problem?
When I'm in e-mail, I get a hand with the pointed finger and a message box saying "1 item". The hand and box follow my pointer around the screen but I can't open up any e-mails. The only way out of it is to go up to Hotmail on top, select it and them
-
Planning Level and Planning Group empty
Hello We have recently activated EA-FIN (Financials Extension) in our client´s SAP system (ECC 6.0) to implement Liquidity Planner via transaction SFW5. After this activation, we found that SAP is not updating fields of planning level (FDLEV) and pla