HT201210 Iphone 5 can not save my router of 2.4ghz and does not connect more than 3 minutes but Iphone 4s has not that problem in the same router.

My iphone 5 is not saving my unlocked router. My router is linksys and is 2.4 ghz, My other devices such as iphone 4s and ipad2 have not had that problem with router. My iphone 5 connects hardly to my router but does not stay connected more than 3 minutes within the range.

Try rebooting your router by removing all power from it for about 15 seconds.

Similar Messages

My iphone 3gs has a vibrating problem where the phone continuously vibrates

my iphone 3gs has a vibrating problem where the phone continuously vibrates

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
If this does not work, set it up as new device: Use iTunes to restore your iOS device to factory settings - Apple Support
If still no luck, get it checked by an Authorized Apple Service Provider or Apple:
iPhone - Contact Support - Apple Support
Has the software on your phone been modified at some point in the past?

I knew that iphone 4 has an antenna problem, are the new iphone4 sold at apple now has the same problem?

I knew that iphone 4 has an antenna problem, are the new iphone4 sold at apple now has the same problem?

It does? Mine certainly doesn't.

Microphone and what U hear can not be use at the same time at the same time

I am using Creative SB X-fi Xtreme Gamer (Creative Model Number: SB073A), sound card and have down loaded the latest drivers (version 2.18.15). What U hear is enabled, which in turned makes the microphone unavailable. If you reverse the settings, then what U hear is unavailable.
It appears that; microphone and "What U Hear" can't be enabled at the same time. If someone has an answer on how to correct the following settings to achieve; using the microphone and what U hear at the same time would be appreciated.
My OS is WIN 7x32

It was possible in Windows XP but due to windows 7 own audio mixer this does not work anymore.

Can I move/rescale more than one still image all together, when they will all use the same parameter

Okay, basically, I like to make small, simple movies for my DVD menus. I make these with premiere CS5.5. They are just a series of stills as a slide show, with appropriate music. What makes these so time consuming is this: I have maybe twenty pics, which I take from MovieMaker as this is quick, simple, and they are not too large (and I dont know how to take pics in premiere, but you can tell me if you like!). However, they are placed by default in the centre, and I need them a bit to one side to make space for the DVD buttons. Also, still a bit big so maybe reduce to 90 percent. I presume they are basically JPEGS even though moviemaker calls them something else. So, I have to highlight each pic individually, open the motion thingy, rescale, and enter new figures in the position fields. Not a big issue as such, but I have to do it for each one and put my self at risk of repetitive strain injury! Can I do them all at once? Is there a way? Bearing in mind I want them all same size and position, so exactly the same parameters. First time, I thought EASY!! I will just group them all together and do it in one! Guess what? Grouping disables the scale/reposition facility. Grouping seems to be merely an aid for dragging things together on the timeline. Just a simple linking process. Photoshop lets me link layers in this kind of way, but also has the group facility that is more serious, and lets you do transforming and all sorts, treating it as one object. Is there a premiere equivalent of 'group into smart object'? I suppose what I am asking is relevent to clips as well as pics, and other facilities apart from scaling and moving. So, if you want to do the SAME process with the SAME parameters to SEVERAL parts of the project, is there a way? Or does it have to be one by one? I cant find a way apart from rendering and reimporting which wouldn't save a lot of time anyway. Thanks. HOWARD
PS if there is a 'snapshot' facility in premiere, please tell me how, and is it necessary to copy the footage and take the pics from the copy? I have always done this with moviemaker as I discovered that once snapshots were taken, it did (sometimes) damage the frame of the footage, Hence I make a copy to use for pic-picking!

I completey agree with Jim Simon's suggestion regarding a Premiere Pro solution. I think however I would choose to do it in Photoshop with a script - Record the following actions and then you can apply that action to selected images or even more handy, all photos in a folder:
Image / Size (to start exactly the pixel H x W you want for the image)
Image / Canvas size (for example anchor right or left, adjust width larger than current image, canvas extension color = black, etc.)
Regards,
Jim

How do I change my Apple ID on the Iphone it has everything backed up to the same ID as my fathers

I for some reason have the same Apple ID on my iphone as my dad does. But on my computer I have my own, how do I make them one in the same. I want to seperate us so I can update my new phone with all my old pictures and texts that are stored on my apple ID on icloud.

Take a look at this link, http://support.apple.com/kb/ht1311

How can I make my Outlook sync with ical and address book on more than one mac?

It currently syncs with my iMac through 'this computer' folder, but i dont have outlook on my macbook, so basically... how can i make my outlook automatically convert/sync to icloud enabled folders?
Not too confusing i hope.

Outlook won't work with iCloud. On your Mac.

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a r

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a restart, it holds the setting, but loses it when it is shut down for any period of time. Does anyone else have this issue? The setting holds for photos taken with camera storing to SD card. Only the email attachment setting does not hold.

I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
I don't know if this will help you much, but it might.

Can't connect more than one device.

I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holding the button for a longer time and nothing worked. I had no choice but to create another network. Once created, I can't connect more than one device. If I have my MacAir hooked up the network and I try to get my Ipad in, the minute I type the network pass in my Ipad, a screen pops up where I have to log in with my internet provider account. When I do that, it will connect, but my MacAir will disconnect automatically.
Appreciate any help!

Things are a bit different with the 2nd Gen AirPort Express and other newer AirPorts.
A Factory Default Reset is now the same as what was previously known as a "Hard Reset".
Power up the AirPort Express and let it run a few minutes.
Hold in the reset button on the Express for 10 seconds
Release the reset button and allow a full minute for the Express to restart to a slow, blinking amber light
If the Express is operating correctly, it will be back to factory default settings at this time.
If you try the reset a few times and the Express will not return to default settings, the Express is defective.

Helvetica regular font missing in Photoshop CS3, but not in CS5 on the same computer

I have both Photoshop CS3 and CS5 installed on a Windows 7 64-bit system. Photoshop CS5 has two Helvetica fonts: one TrueType and one Type 1. The TT version only offers italic and bold italic styles. The T1 font offers the full suite of bold, italic, bold italic (or oblique), and medium (or regular). This seems odd, but it's sufficient. Photoshop CS3, on the same computer, only offers me the Helvetica TT font, with just the two styles mentioned above. Why can't CS3 see the T1 Helvetica? Why does the TT Helvetica only show me two styles? In case it's relevant, I believe the Type 1 version is the only one I deliberately installed, and I recently upgraded to a 2010 version of the font made available by Adobe (to resolve another issue with Microsoft Word 2010).
Thanks in advance!

There is by default no Helvetica on PCs. Wherever those fonts come from, is some place else. Either another program installed them or you bought the font fron Linotype. The latetr is doubtful, of course, in light of what you stated. Aside from that you may wish to check your Adobe font directory (C:\Programm Files\Common Fiels\Adobe\Fonts) vs. your system font directory. For CS3 this would be relevant. Typefaces not showing up usualyl means that multiple fonts occupy the same name or the font system can't figure out things for otehr reasons...
Mylenium

How can i set auto-lock to something longer than 5 minutes but less than never?

i'd like to set the auto-lock feature to more than 5 minutes but less than never.

That is not an option in Settings. Why would you want the screen to stay on that much longer? All it will do is contribute to shorter battery life and the chance that if your device is stolen that someone would be able to access your data.

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!

Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

iPhones require a SIM for activation.
Put the device in DFU mode (google it) and restore via iTunes.

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

Make an appointment at the genius bar and get the phone replaced.

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

HT201210 Iphone 5 can not save my router of 2.4ghz and does not connect more than 3 minutes but Iphone 4s has not that problem in the same router.

Similar Messages

Maybe you are looking for