HT201210 updating and computer said i had to restore and update the itunes extracts then says cant find device tried new cords dident touch phone and updated itunes
went to update iphone to 6.1 clicked update said connect to itunes. itunes makes me click restore and update. as soon as extraction then it verifys with itunes. while its doing it . it says cant find device and i cant use my phone till its restored. i updated my itunes on my computrt and tried many different cords and samet thing every time help me iv had the phone for 3 years
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Similar Messages
-
i recive email from itunes to veritify my email adress and is said...''Click link below'' The problem is that i cant see the link plese help me!
Hi Maastricht2014,
Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
Hope that Helps!
~ Arpit -
cant download itunes when installed it says it is missing support files ,help
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
So I was using my iPod Touch 5th generation and the charger wouldnt charge it and it died then while it was in the process of tuening back on the apple logo dissapeered and it kept on turning on and off so i put it into DFU mode and it said to plug it into itunes to i did and it said i had to restore it to use it but when i tried to restore it it brought up ," Couldnt restore ipod, error code (9) " ..... and i have tried 3 different USB cables and two different computers and USB ports and i have no clue what to do so i would like help from anyone please that would be awesome!!!!
Thank you,
ZacZac henderson wrote:
...Couldnt restore ipod, error code (9) " ...
Try here > Configure security software -
My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?
first try:
iOS: Device not recognized in iTunes for Windows
next
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My iPhone 5s will backup to both my PC and cloud, it then says it's syncing, but new music that I put in to iTunes doesn't transfer over to the phone.
It depends on the iPod shuffle model... Assuming your shuffle is the 4th gen (or 3rd gen) model, do you use automatic syncing or the manual method (drag and drop song on iPod in iTunes)?
This document shows the four shuffle models, and provides general info about loading content on shuffles
http://support.apple.com/kb/ht1719 -
I have itunes on my computer and haven't used it for a while and went to click on shortcut and got message that it has stopped working so tried to update, followed all promptsd and it said it had been installed but when i clicked on shortcut again came up with same message. I have tried to uninstall and re install still get same message. Don't know why or what to do? Also tried to set up my dads Ipod Nano on his computer and it wont accept the Australian area code? ????Help Please going insane
Does iTunes not see the phone?
If not, make sure you're running the current version of iTunes.
If you are running the current version and it still doesn't recognize it, see this: http://support.apple.com/kb/TS1591?viewlocale=en_US&locale=en_US
As for iPhoto, you will have to purchase a newer version. It's not a free upgrade. Or, you can use Image Capture, which is built into OS X, to import the photos. -
I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up all of my pictures from my phone.
If you backed up the device, all the data is in the backup. Restore the backup.
A better question is why would an intelligent person not copy the pictures from the device to the computer regularly, especially before attempting an update, as the device is designed to be used? -
i tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
or
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I updated my ipod touch4 and it said i had to plug it up to itunes which i did then when i plugged it in it said i had to restore which i did and i was very upset and it restored it i guess and now its frozen on the apple logo how do i fix it? ps my ipod home button doesnt work.
Try as much as you can. When it says to place in recovery mode use this program instead.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I recently got my iPhone 5 unlocked and the other day I updated my phone to ios 7. After doing so my phone shut off and turned on and it said I had no service. I guess it completely wiped out my unlock. I was wondering if anyone knows what I can do to fix it!!
How, EXACTLY, did you get it "unlocked"? ONLY the carrier it's locked to can authorize unlocking it. Anything else is a hack.
You can not get help here for a hacked phone. -
i had just gotten a new ipod touch and i had completed all of the mandatory start-up settings and when i plugged it into my computer to sync my music from itunes, a pop up came up and it said, This ipod cannot be used because the apple mobile device service is not started...what do i do to sync it my itouch?
See Here...
AMDS
http://support.apple.com/kb/TS1567 -
HELP.
tried to update to ios 6.1 and it crashed my phone, plugged it into itunes like it told me to and it said i needed to restore it, so tried and it failed and it just keeps failing. its an iphone 4. what do i do?!it just says restore failed error 3194 but i can't find anything useful on google or anything i can understand, i don't get technology at all.
-
The computer that I originally used with my ipod touch is dead, so I am now synching with another computer. I had to restore the software of the ipod, I am able to drop and drag my tunes back to the ipod but not my purchased apps. I have no problem doing this with other ipods that I have synced and backed up to this computer.
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.
Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Restrict Firefox Access to Local Disk Drives in Linux
I used to be able to modify the browser.js file and use regular expressions with onLocationChange to restrict access to about:, file:, and resource: I am unable to locate where to make the changes to have this same behavior in Firefox 4. I need to co
-
BlackBerry Curve 9320 not able to access BlackBerry App World
Hi All, I am new to Using BlackBerry.I have got a BlackBery Curve 9320 also as it requires 3G Net Connection for accessing internet i have put Vodafone's 3G internet pack as my network provider is Vodafone.But still i am not able to access my BlackBe
-
Is it possible to insert a form in a image that only becomes visible when it is clicked?
I am trying to add a basic subscription form to my landing page in dreamweaver. I have an example of it below, and so I am wondering how do I add a submission form to an image that isn't visable half the time? landing page example: www.kandied.co Th
-
QuickTime Interactive Movie Playback Controls
When playing Quicktime interactive movies as slide shows full screen, are there any navigation options while remaining in full screen? I want to be able to jump to other parts of the presentation without existing full screen.
-
How to embed an adpcm format audio stream to rtmp stream?
I am a flex developer, i encounted a problem when i develop a flash program for my ipcamera, i add a adpcm format audio stream to the rtmp stream, but the specification says that only 5.5k,11k,22k and 44k is supported, but my device can only generate