HT201320 Okay, not enough space to give information so try this. I have an Ipad with Account not Verified message. How can I verify my account?

I have operational PC skills but have never looked at an Ipad. I'm trying to help a friend with no PC skills learn to use her new (April 29 purchase) Ipad. She was very frustrated and gave up on it shortly after buying it. Initially she had support come to the house and install a router and demonstrate the use of the Ipad. Some usage began but without frequent use and some skills, minimal operational skills evaporated.
I'm getting a little familiar with the Ipad. I think it is communicating with the router. When I go to Settings I see WiFi has NETGEAR07 to the right. Next when I go to iCloud I see a message (Check your (e-mail address) for instructions to verify this account.I looked and did not see any instructions. She may have deleted the instructions long ago. I did contact Apple and had her user ID password reset. What do I have to do to get the Account verified?
The Operator Manual mentions a Setup process but I don't see any way to initiate it again. Just thinking that might be the step to start with.

Similar Messages

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
If you go to Settings>General>About how many GBs are specified as being available? If you are low on space maybe deleting some apps may help.

I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

There shouldn't be any fee involved. Call the Apple online store for your country (1-800-MY-APPLE in the U.S. and Canada) and request a refund.
If the download is stuck, you can download in iTunes on your computer, then sync it to your iPad once your free up some space. This explains how to download your previous purchases to your computer: http://support.apple.com/kb/ht2519.

Can anyone assist me? I have backed up my Iphone 4 however now cannot restore as not enough space? I need to get this sorted by tonight?

I have recently backed up my Iphone 4. However now it will not restore as it claims I have not enough space on the iphone. I am in a major hurry to get this up and running by tonight as need it for work ?

Hey annefrombeach,
Thanks for the question. It sounds like you are unable to restore your backup due to an error message regarding not enough free space. The following resource outlines troubleshooting steps for this specific error message:
iOS: If you can't back up or restore from a backup in iTunes - Apple Support
http://support.apple.com/en-us/ts2529
Thanks,
Matt M.

Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"

I have a project a Encore CS6 V6.0.1.013 for MAC.
I tryng export do Blu-ray Disc, but ireceved this error message
Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"
But at "Disc Info" i have 14.71mb free

My longer notes on this error:
The most common workaround for this is to build to a folder and burn with ImgBurn (for PC) or toast (for Mac).
Searches show that there has not been success in many situations. I do not believe that it is one problem.
I have generally believed that the error refers to temporary storage on the hard drive. And users underestimate the amount of temporary hard disk drive space used. For bluray it is about twice the disk or more.
Some users experience this error when they are creating dual layer BD disks, and a layer is more than 25G. Each video/layer must fit on one side.
And some users successfully burn their disk by re-encoding to a lower bitrate (a 25G BD disk does not hold 25G). Encore uses padding to predict the size on disk (e.g. add 10% to the amount of space it predicts that build will use), and it can be wrong.
Always good to "run as administrator, though I don't know that ever fixed this issue if someone wasn't.
For CS4 there was a required update for a Roxio component. I believed this was a temporary problem due to the combination of Win7 and Encore CS4, but users on newer OS and Encore have reported resolution of problems after installing the patch.

After accepting update to my time capsule, I can no longer complete a backup because there is not enough space. I tried deleting old files, but it doesn't seem to work. Any advice:

My time capsule was updated through an apple download update on June 16, and now I cannot back up my computer. The message is that there is not enough space. I tried deleting my files, but it didn't help. any suggestions?

How much space is there according to airport utility?
TM can be fussy.. Do a factory reset of the TC and give it a new name. Use short, no space and pure alphanumeric type names..
And reset TM. See A4 here. http://pondini.org/TM/Troubleshooting.html
Then set up TM again to the TC and see if TM will start .. the reset will not hurt the backup and TM can still find it on a renamed TC.

Macintosh HD not enough space for time machine backup?

I have a 128GB Macbook Air. When I first got it, I made a Time Machine backup of the system, but now when I go into the recovery and choose to restore from backup, it says the Macintosh HD only has 112 GB and that it's not enough space for some reason. Why would it have me do a backup that I can't Restore? I need to restore the backup.

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
{ diskutil list; echo; diskutil cs list; } | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

Timeline won't back up (not enough space)

Timeline won't back up because it says there is not enough space on my external drive. This never happened before.
I have 10.6.8. I just restored my new hard drive from Timeline. It was an easy restoration. The first time I
backed up on Timeline, it said there was not enough space. I do have my external drive partitioned. I thought old backups
were deleted when the space was needed. What happened? Thank You

I thought timeline deleted old backups on it's own so you would not run out of space. Did I misunderstand this? Is it just a coincidence that this occcured the very first time I tried to back up after I restored my hard drive from the external drive, through Timeline?

CAN NOT UPDATE AS ITUNES SAYS NOT ENOUGH SPACE ON PHONE

wHEN TRYING TO SYNC WITH MY IPHONE I GET A MESSAGE SAYING THAT THE PHONE COULD NOT BE UPDATED AS NOT ENOUGH SPACE FOR A 1.1 MB SYNC.I HAVE OVER 2.5 GB SPACE. BUT STILL WILL NOT UPDATE

Hello Peter39,
After reviewing your post, it sounds like the iPhone will not update because it needs more space available. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
If you need more space for an iOS update - Apple Support
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Restoring backup in itunes fails- not enough space

After upgrading ios on my iphone 4s all contacts lost. Tried restoring from itunes only to get message "Can't restore...not enough space on iphone" when there is plenty. Have taken screen shot. Help. Spent several hours trying to find support for this. I'm new to communities so patience please.
This has really put me off switching to the Apple environment which I was considering doing. Think I'll go down the Google/Android/Samsung product route.

nutdrum wrote:
This has really put me off switching to the Apple environment which I was considering doing. Think I'll go down the Google/Android/Samsung product route.
Thanks for letting us know.
Good luck!

Help:Not enough space due to too many probes

Hi,
I have wroten a D script named application_call_trace.d as following:
#! /usr/sbin/dtrace -s
#pragma D option dynvarsize=4m
pid$1:::entry
pid$1:::return
}When using it to trace a process which pid is 1489, i get a error:
bash-2.05b# ./application_call_trace.d 1489
dtrace: failed to compile script ./fault_agent_times.d: line 5: failed to create probe in process 1489: Not enough space
I know it is due to too many probes, but i need these probes, what can i do then?

Hi,
I have wroten a D script named
med application_call_trace.d as following:
#! /usr/sbin/dtrace -s
#pragma D option dynvarsize=4m
pid$1:::entry
pid$1:::return
}When using it to trace a process which pid is
is 1489, i get a error:
bash-2.05b# ./application_call_trace.d 1489
dtrace: failed to compile script
./fault_agent_times.d: line 5: failed to create
probe in process 1489: Not enough space
I know it is due to too many probes, but i need
eed these probes, what can i do then?You need to tune up the number of probes; see /kernel/drv/fasttrap.conf, and either reboot or run "update_drv fasttrap" after making the changes. The default is 250,000 -- I recommend changing it to 1,000,000. (Indeed, we're considering changing the default to 1,000,000 anyway because so many are running into this limit.)
- Bryan
Bryan Cantrill, Solaris Kernel Development. http://blogs.sun.com/bmc

I transferred my files, including iTunes, to a new computer. When I go to sync, it says I'm still synced with the old, do I want to erase and resync. AND then it says not enough space. What to do?

I transferred my files, including iTunes, to a new computer. When I go to sync, it says I'm still synced with the old, do I want to erase and resync. AND then it says not enough space. What to do?

Pictures, assuming they were taken with the device, can be copied off at any time. This has nothing to do with syncing.
If the pictures were instead synced to the device via iTunes, they are not the original images. Instead, they are optimized copies of the originals for display on the iPhone. There is software that can extract them, google it.
Where is the backup of the computer? And before you ask, the iPhone, like all iDevices, is not and has never been a backup device.

I've upgraded my MacPro but not enough space to do so on my 5s and iPad. Should I take both back to original settings and allow the update?

Not a techie here...please advise on best method to update 5s and iPad Air.

To clarify: I have a 16g iPhone 5s and an iPad 32g and both are due for current Yosemite updates. I successfully completed Yosemite update for MacPro. I attempted to delete photos and music from both of the former in order to allow the download, however, still not enough space. Also removed some apps that weren't being used. Still not enough space. So I thought perhaps taking both devices to original straight-from-the-box state might allow for easiest updates to download.

Installation fails with "not enough space" message ...

Installing Application Server 8.1 on Solaris Sparc on network with lots of space but get this message in the log file of the failed installation:
ERROR - exception while updating command line utilities
Not enough space
ERROR - default domain creation returned following exception: /home/lm71165/SUNWappserver/bin/asadmin: not found
INFO - End core server configuration.
Any ideas on why this occurs?
Thanks.

"Not enough space" message is issued by J2SE due to lack of swap space and not disk space per se in this case.
To resolve this, first uninstall partial installation using provided uninstall utility (available in installation directory). Then, make sure that you free some additional swap space: delete all unnecessary content from /tmp partition and shut down all unnecessary processes running on the system. Once you do this, you can restart the installation.

I am trying, unsuccessfully, to export an iphoto smart album- 12,000 photos, no movies- (information is saying 31GB) to a brand new 32GB scandisk flash stick. A caution msg keeps saying "there is not enough space to complete this" Help!

I am trying, unsuccessfully, to export an iphoto smart album- 12,000 photos, no movies- (information is showing 31GB total) to a brand new 32GB scandisk flash stick. A caution msg keeps saying "there is not enough space to complete this" Help!

You need a larger drive or an external drive - they OS needs a minimum of 10GB just for normal operation so you are already experiancing degraded preformance - if yo do not get more space you will start losing data
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

HT201320 Okay, not enough space to give information so try this. I have an Ipad with Account not Verified message. How can I verify my account?

Similar Messages

Maybe you are looking for