HT201401 my microphone does not seem to be working since i did the last software update. any idea's

I can record voice notes no problem, but when i make calls the recepient cannot hear me.
I did a full restore and had one succesful call and that was it.
tried calling with and without the cover no luck.
phone is only two weeks old,problem only started once i did the latest software update. vs5.1.1
any idea's?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
If you've gone through ALL the troubleshooting steps and you're still having problems, there's really not much left to recommend.  You'll need to bring your phone into Apple for evaluation.
Best of luck.
GDG

Similar Messages

  • My photo stream does not seem to be working as before with the new PHOTOS update. some of my devices are not getting the uploads/downloads

    My photo stream does not seem to be working as before with the new PHOTOS update. Some of my devices are not getting the uploads/downloads, anyone have this problem?

    Recommend that you post your question in "Photos".
    Remember, Photos is not a replacement for Aperture.

  • The safari app no longer works since I did the last update. Does anyone know how to fix it?

    Since the Safari app came with my iPad, it seems to be the default app for opening links in messages etc. and I cannot delete it to reinstall it. It stopped working when I did the last software update. Has anyone else had this problem? If so. Were you able to fix it?

    Close all apps in multi-tasking view.
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen
    http://support.apple.com/kb/ht5137

  • The microphone does not seem to be working correctly--it is very low

    When using Vtok and Google video chat, I discovered that I could see and hear my daughter perfectly on my iPad2 from her computer. She could see me but not hear me. A microphone icon showed on the bottom of my screen that was grayed out with a bar through the microphone.
    I cannot find any way to make any changes to the microphone setting.  The sound was on and turned up full. 
    Later I thought of making a short video to test the microphone. When played back, the sound was almost inaudible. I then synced the iPad and afterward the sound was slightly louder. But it is still not normal. Trying again to use Vtok or Google chat the microphone was still not working.
    Any ideas on what I can do so I can video chat with my daughter? She isn't sure she can put FaceTime on her old Mac. And she successfully video chats all the time with all her friends from Google.
    Thanks, Andy in NJ

    Andy-
    You might also try the iPhone App, Skype.  It works well with the iPad, and there is an auto-test server that will record your audio and then play it back.
    I recall one other person who had an iPad 2 with a defective microphone.  That person could use an external headset microphone, but not the iPad's internal microphone.  If it is convenient to take it to an Apple Store Genius, they should replace a defective iPad 2 on the spot.
    One thing to try that might help and won't hurt anything, is to reboot your iPad's CPU.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  After the iPad restarts, see if it has improved.
    Fred

  • "Item Help Subscription" does not seem to be working

    Hi All,
    I am on APEX 4.0.1. and trying to use the feature "Item Help Subscription" which does not seem to be working.
    Here is what I have done.
    -> Created a forms page (page 2) that has an item 'P2_NAME'. Define the "Help Text" for that item.
    -> Created another forms page (page 3) that has an item called 'P3_CUST_NAME'.
    -> In Page Definition for Page 3, Clicked on 'Edit All' icon under 'Items'
    -> Clicked 'Utilities' and selected 'Item Help Subscriptions'
    -> For Item 'P3_CUST_NAME', clicked on the LOV under 'Subscribe To' field and selected 'P2_NAME'
    However when I am clicking on 'Apply Changes' to save the changes, it is not getting saved. The 'Subscribe To' field appears blank even after applying changes.
    What I want to know is - is it a bug or have I missed something ? Is anyone using this feature successfully ?
    Any pointers or help will be highly appreciated.
    Thanks & Regards,
    Ashish Agarwal
    http://www.asagarwal.com

    Hi Ashish,
    I had created Item Help Subscription that you had mentioned.
    But I don't have any problem with this. It creates successfully.
    I am using Application Express 4.0.2.00.06
    Regards,
    Kartik Patel
    http://patelkartik.blogspot.com/
    http://apex.oracle.com/pls/apex/f?p=9904351712:1

  • My microphone does not appear to be working, people can not hear me on Skype.

    My microphone does not appear to be working, people can not hear me on Skype.  TIA

    I have the same problem..-_-

  • My operating system does not seem to be working

    My operating system does not seem to be working properly.  The system preferences cannot be accessed and itunes won't work either.
    My mac is OS X Version 10.4.11 so is quite old.

    Hello,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Let us know if that helps or not, or any other problems.

  • I have a Trust eSATA II ExpressCard which does not seem to be being picked up by the OS. Can anyone help?

    I have a Trust eSATA II ExpressCard which does not seem to be being picked up by the OS. The Sata controller icon on the top bar is shown but only with the option to 'Power off Card'. I have a seagate 1TB Goflex drive attached to it via their own eSATA cable.
    My Macbook Pro is 2.2Ghz Intel Cor i7 with an 256GB SSD drive and running Lion 10.7.2
    Can you help?
    Thanks!

    Hi,
    For what it's worth, I picked up the same Trust eSATA I ExpressCard and had the same problem. The post of DrFrankenmac at https://discussions.apple.com/message/8108772#8108772 solved my problem.
    You need to download the BASE Driver for PCI-E Sil3132 (32-bit) from http://www.american-media.com/support/downloadDDDS2350S.html that works just fine.

  • TS2634 ipad keyboard does not seem to be working.  I have recharged it ---what else should I do?

    My keyboard attachment to the ipad does not seem to be working.  It has been recharged.  Is there anything else I should be doing?

    When you plug in earphones, or anything in the audio output port, it should be reflected in SYSTEM PREFERENCES>SOUND.  If not, try a PRAM reset.
    http://support.apple.com/kb/HT1895
    Ciao.

  • HT1766 My touch screen does not seem to be working. The slide to unlock will not slide

    My touch screen does not seem to be working. I can not slide to open my phone or slide to turn off.

    You have tried restarting, right? Also, try holding the home and sleep/wake buttons together for at least 10 seconds, until the Apple logo appears. See if that helps. If it doesn't and you think this is a hardware problem, taking it into the Apple Store is your best bet.

  • When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    I too have the same problem.  The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video.  Apple needs to fix this!!!!!!!!!!!!!!!!   its a joke,  my iphone is all messed up after the last update as well.  at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues.  Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!,  there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem. 

  • My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

    My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

    Try the following:
    In Finder, select the problematic volume and then press command-I.
    Expand the Sharing & permissions section if it's collapsed.
    If the section is locked, then unlock it by pressing the padlock button and then authenticating as directed.
    Tick/check Ignore ownership on this volume.

  • When I add a quicktime asset directly to my DVD SP project it does not automatically encode to be DVD cmpliant. Says incompatible asset. Any ideas?

    When I add a quicktime asset directly to my DVD SP project it does not automatically encode to be DVD cmpliant. Says incompatible asset. Any ideas?

    You use the term "QuickTime Asset" like it means something.  QuickTime is just a container ... a QuickTime file could be made from any number of codecs, many of which are not compatible with DVD Studio Pro.
    What codec is the file you're trying to import?  Have you considered using Compressor to encode it to the proper format?
    -DH

  • TS3988 trying to buy more storage on the cloud, response is 'there was a problem - try again later' its been doing this over the last two hours - any ideas what the 'problem' is please (assuming its not me) - thanks

    trying to buy more storage on the cloud, response is 'there was a problem - try again later' its been doing this over the last two hours - any ideas what the 'problem' is please (assuming its not me) - thanks

    Additional info on this:
    I strongly suspect this is time machine-related. Even though time machine has been turned off, this happens at intervals of exactly one hour.
    A single entry appears in the kernel log at the precise moment the (first) popup error box appears. This is:
    "AppleSRP started."
    Anyone have any clue how to go about diagnosing or fixing this? I don't even mind trying something brute force (short of wiping the HD and reinstalling lion, which I really DON'T want to do; I don't mind a non-destructive reinstall).

  • Firefox does not know how to open this address because the protocol (Sims3) with any program connects

    Firefox does not know how to open this address because the protocol (Sims3) with any program connects
    can you help me plz

    Was the message sent from Microsoft Outlook? When you embed an image in a message in Outlook (at least up to version 2003), it creates a hidden attachment for the image and then inserts a "cid" reference to it. If the attachment gets stripped for any reason then the "cid" reference is useless: Outlook does not store the original URL or path to the image.
    Edit: By the way, which webmail site has this problem?

Maybe you are looking for

  • Move URLs in Text to End of Story Or Link Text. Also: Tables

    Hello everyone I'm currently working on a script that translates Textile Markup into formatted InDesign-Text. This worked fine for the most part, seeing as it's not really hard to do by FindChangeByList. Some things are a bit trickier than other thin

  • How do you get Openoffice to look more Gnome-like?

    When you install OOo (version 2.2.1-3), some of the output in the termial says use "export OOO_FORCE_DESKTOP=kde" or use "export OOO_FORCE_DESKTOP=gnome" to preset your desired look, or put it in /etc/profile, rc.local, or ~/.bashrc. I have tried cop

  • Scanner on USB 1

    Just a quickie, I'm looking at using a USB powered scanner with my eMac which only has USB 1 and I'm just wanting to be sure it will work. I understand it will be significantly slower than USB 2 but I don't mind that for now as I intend to get a new

  • Problems w/Button events in Forms

    All, its me again. Having tried all which way to use a Popup, I thought I would write a custom JavaScript event handler for a field. I added a button. The first time around I did not add any event. Then, I went back and for the onClick event of the b

  • Win 2000 and sqlj/jdbc

    I have installed oracle 9i (verison 1) on a win 2k system. When trying out the brief test demos in the sqlj folder I get the error "exception in thread "main" java.lang.noclassfounderror: TestInstallJDBC. TesInstallJDBC is the test demo which comes i