HT201412 My front camera on my iphone 5 works but my rear camera doesn't?

it's been like this since the iOS 7 update. It never did this on before i updated. Is there anyway to fix this?? I've tried turning my phone on and off and resetting my phone but it doesn't help.

Hi awkwardonline,
If you are having issues with the rear camera on your iPhone after updating to iOS7, you may want to try the troubleshooting in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
- Brenden

Similar Messages

Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps but the rear camera is not working, all other apps work perfectly well, how do i resolve this

Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps (such as facetime and skype) but the rear camera is not working, all other apps work perfectly well, how do i resolve this

Double tap Home button and delete Camera app from multitask-list.
Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If problem persist, make an appointment with genius bar for evaluation.

I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

No one here can help you. If your phone is no longer under warranty, a third-party repair shop will most likely be your best bet. You can't mail the phone to Apple, in the US, as Apple does not accept international shipments. You could mail it to a friend/relative, in the US, & they could take it to an Apple store for you. Some Apple stores repair iPhones. Otherwise, you're looking at an out of warranty replacement.
Good luck.

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac

Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support.

My iPhone works but screen is very,very dim,any ideas?

My iPhone works but screen is very,very dim,any ideas?

I've tried all that stuff nothing happens. I've even fix a new screen on still the same?

Internet sharing works but the DNS part doesn't

I'm posting this message because I believe it is a bit different from other 'Lion internet sharing' posts in terms of the source of sharing and also the results I get.
Similar to other users experiencing the same problem, my internet sharing setup stopped working as expected after upgrading to Lion. However, I can't say it stopped working completely. It still does work but the DNS part doesn't. This means I can still perform pings, ssh and socket connections from computers using the shared connection. But I cannot browse the internet because web site names can't be resolved.
For example, my MacPro has two Ethernet interfaces. On one of them (en0) I vpn when connecting to work using a VPN service I created via System Preferences => Network. I used to share that VPN connection to computers using the 2nd one (en1). The other computers are linked to (en1) through a multiport hub. This setup used to work flawlessly in Snow Leopard and multiple users could use the shared vpn internet connection.
After the upgrade to Lion I can still see other computers on the local network and also ping any external internet site. I can even use Safari and navigate my ISP's home page using its IP address only. However, DNS doesn't work and internet domains cannot be resolved by name so internet browsing is not possible.
Furthermore, when I don't VPN to work but simply share the connection to the internet from (en0) to computers using (en1) everything works as it used to in Snow Leopard. The difference here is that the same DNS servers are used by both network services.
So far I'm stuck with these findings and I don't know where else to look for answers. Any input or feedback is greatly appreciated.

I've to admit that i don't even know what VPN means.. but..
I have an 27" iMac (mid 2010), a iPhone 4 and a Macbook Pro 13" (mid 2009) .. and i used to share my ethernet connection to wi-fi on Snow Leopard. Since i upgraded to Lion (i'm using it since the first DP, and i think the internet sharing was working under the 1st DP .. i'm not pretty sure), it just doesn't work.
Just like solongpc, it does activate the internet sharing, my other devices can see and connect but neither of then (my iMac - host or my mbp and iphone) can navigate on the internet. And when i turn off my internet sharing (on my iMac), it still not acessing any website.. and i've to restart my moden.

Why can't I get my printer to print out a playlist from i-tunes? It used to work but now my printer doesn't seem to receive the "print" command.

Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!

I finally solved this problem after toiling with it for a couple of days. Solution: Once you have burned your CD you must go back into iTunes to your music/playlists and select the playlist you just burned and click file; print and you will get the mosaics that we have been accustomed to. I was on hold with Apple Support when I found this myself. Yes......!!! Problem solved..for me anyway. Good luck!
Scott

Original iphone works but can no longer be activated for phone use????

I have one of the original iphones that works but I no longer use (as in I paid $700 for it when it first came out). I just gave it to my nephew and my brother tells me Apple and ATT don't support it and he's being told that it can't be set-up as a functioning phone? That the current version of itunes won't support it either? Does this make sense to anyone? Could this be true? I'm on my 3rd iphone version and the first 2 work I just upgraded so now the old phones can't be used? I gave the same nephew a much older flip phone that still works and it has phone service.... Thoughts?

This doesn't make any sense to me either. Are we missing some vital information or is he just mistaken?
Until this last November, I was using a Blackberry Curve. I was visiting a friend and complained about the trackball giving me fits. He went to his kitchen junk drawer and pulled out his very first iPhone 2g and tossed it to me. I've been using it ever since without issue.
If the phone is in proper working order, it should only take a call to AT&T to order an appropriate plan and sim card. The original iPhone is still fully supported by AT&T and iTunes. While iOS support does end with version 3.1.3 and more and more apps do require iOS4, it still affords a very reasonable user experience. So reasonable, in fact, I am reconsidering my original plan of upgrading to the iPhone 4 this month. What can I say? It kicks BB Curve behind and does everything I need using a sweet grandfathered calling and data plan! laugh

TS1702 facetime on my iphone works but not on my ipad

Facetime on my iPhone 4S works but not on my iPad (3rd or 4th Gen)

From the iPad User Guide:
To use FaceTime, you need an Apple ID and a Wi-Fi connection to the Internet. When you open
FaceTime, you may be prompted to sign in using your Apple ID, or to create a new account.
Make a FaceTime call: Tap Contacts, choose a name, then tap the phone number or email address the person uses for FaceTime.
You can also make a FaceTime call from the Contacts app.
Rotate iPad to use FaceTime in either landscape or portrait orientation. To avoid unwanted orientation changes, lock iPad in portrait orientation. See Portrait and landscape orientation on page 20.

HT201412 my home button and lock button work but my screen is not

my lock and home button work but my screen dosen't, please help

can you hold the power and home buttons at the same time until it does a hard reboot? Dont let go until you see a black screen with a white apple.

3G works but calls and messeges doesn't

Hi. I bought my iPhone 5 from my friend. The 3G data works but I can't call or send messeges, not even receive those. The network of my provider is shown, yet I dont have any connection bars.

Then contact your cell phone provider to resolve the issue, both of those are carrier features.

New site created in iWeb, Podcast works, but the Subscribe button doesn't!

Hi All,
I created a new site in iWeb at http://www.adamonearth.com be great if you could help out a little! I am very happy with the site turned out!
But I have been trying to get the Video Podcast subscription link to work for a while now, but the Podcast Subscribe button on my Video Podcast page does not work. For some reason iWeb adds in /adamonearth.com after the website domain, like this... itpc://www.adamonearth.com/adamonearth.com/Video%20Podcast/rss.xml
So if you go to my site at http://www.adamonearth.com and click onto Video Podcast the Subscribe button is on there.
iWeb won't allow me to edit it either. Be great if you know of any ideas to amend it!
Also be great if you let me know what you think of the site overall.
Cheers.
Adam.
iMac G5 Mac OS X (10.4.9)
iMac G5 Mac OS X (10.4.9)

Hi Tom,
Thanks so much for all your help, I really appreciate it.
I fixed the name of the site and called it 'Holly' I now have the Video Podcast link working but one problem, when you enter the website address:
http://www.adamonearth.com
It goes to the Index Of/ page then you need to select 'Holly' which is the folder name for it to divert to the Welcome.html page.
I have put up a directory listing for you http://www.adamonearth.com/54512.tiff
I have tried moving the Welcome.html page above the Holly folder but that then does not link to the other pages correctly.
From what I can see I have done everything right this time, as the Podcast link works in iTunes now.
Any help would be great.
Thanks again,
Adam.

[SOLVED] Wireless card works, but configuration and software doesn't

Hi,
I could manage to activate my Atheros wireless card using the madwifi drivers. I wanted to use knetworkmanager, but unfortunatly i doesn't recognize any of my network devices. I've read the other networkmanager threads, changed the daemons order, disabled the network daemon and the routing entry in rc.conf, but still (k)networkmanager doesn't know anything about my devices.
I tried to use knetworkmanager-svn from the AUR. Initially it doesn't work because the SVN URLs inside the PKGBUILD script a wrong, but even after I fixed them I couldn't compile the source, because there is no configure and no Makefile in the svn head. I'm really a noob when it comes to the linux build system, so I had to give it up.
Now I use wifi-radar. It is terribly slow to connect, but it works. However, when I disconnect with wifi-radar, then do 'ifconfig ath0 down && ifconfig eth0 up' the DNS requests fail. I checked /etc/resolv.conf and the default route (set to eth0), but they are right; the interface just doesn't use the name servers. The only way to get it working is to restart the laptop. How does Linux chose a "default interface"?
I'm not afraid of editing text files, but I'd like change networks fast and easy. I don't want to spend hours to adapt to a new access point... I'm really looking forward to the new wlan stack; maybe things will be getting easier then.
kei
Last edited by Kei (2007-05-04 12:36:00)

Okay, now KNetworkManager works (I forgot adding my user to the HAL group :] ).
There is still a problem - I know it's networkmanager related: At home I'm not using a DHCP server. KNetworkManager cannot handle static IP configuration. However, if I issue the command 'ifconfig ath0 192.168.0.12 subnet 255.255.255.0' while KNetworkManager is searching for a DHCP server I can even ping my gateway, so there is definitely a connection. Unfortunatly KNetworkManager closes this connections after a short period (dhcp timeout). Is there a quick'n'dirty workaround for this issue?
Another problem with KNetworkManager: When switching back to wired network, the DNS server is there :-) but the default gateway is not
Thanks for suggestions..
kei
//EDIT: In Debian there is a configuration file called /etc/network/interfaces. KNetworkManager uses the static IP information I enter there. However, when I modify /etc/rc.conf accordingly in ArchLinux, KNetworkManager does NOT use it.
//EDIT 2: After '/etc/rc.d/networkmanager restart' the static IP setting from /etc/rc.conf are used. The problem with the default gateway only occurs when the connection to one of the networks FAILS. After that failure the configuration is kind of messed up.
Altough it seems more like a dirty hack than a definite solution, I'm quite happy with the way it works now.
[CLOSED] <-- maybe I'm blind, but how can I change the topic to "[SOLVED] $Topic" ?
Last edited by Kei (2007-05-03 23:26:04)

HT201412 My front camera on my iphone 5 works but my rear camera doesn't?

Similar Messages

Maybe you are looking for