HT201413 My ipad 2 will not work. I tried to reset it many times. Nothing. I plugged it into my computer and followed directions so itunes would show up. Tried to restore (bummer to lose everything!) The ipad could not be restored due to an unknown error
My ipad 2 will not work. I tried to reset it many times. Nothing. I plugged it into my computer and followed directions so itunes would show up. Tried to restore (bummer to lose everything!) The ipad could not be restored due to an unknown error (code 9). Any help?
Found this thread by searching the forum. I hope it helps.
https://discussions.apple.com/thread/5471311
Similar Messages
-
What do I do after I've plugged it in?
Restore via iTunes.
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad -
I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?
You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.
-
My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W -
When I try to restore my iPhone, it says: "The phone could not be restored because the firmware is incompatible"
Did you try the things listed here? Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support Is your device jailbroken? Have you ever used the computer to jailbreak a device? Are you trying to load an iOS other than the current one? What version of iPhone are you using? Is this occurring when attempting to update via iTunes and the computer?
-
my iphone is unable to restore or update, it says the iphone could not be restored. this device isn't eligible for the requested build.
sounds like your phone was jailbroken. If this is the case, you're hosed.
-
So let's just say they never connect my ipod to wifi, if they just plug it into a computer and revert it to factory settings, will my lock command and message not send since it was never on wifi?
because a factory-resetted iPod has no connection to your Apple-ID naturally. To Itunes / Apple it is just a brandnew device. They can't disable it remotely. Technically maybe, but not legally.
Your only hope would be the police. Give them the serialnumber of the device. But chances are near to nothing to have it ever returned. I myself have had one stolen and it never was found and was never localized with the "find my iphone" tool. The thief has obviously wiped it and is happily using it.
iPhones are in a better boat, they can be tracked by their IMEI code. Whenever a phone logs it into a cellular network, this code is transmitted. But wifi-only devices don't have that. -
I just went to update my iPhone 5S as it asked me to, and it got to the point with the apple logo on the screen and the black loading bar underneath, but then the screen went black and the phone now won't turn on? I went to plug it into my computer and it said "USB Device not recognised"..
PLEASE HELP ME! It's 1am here in england, I need to be up at 6am for work and won't be able to get up without an alarm... my only option is so stay awake!Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?
-
My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?
There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.
-
I just got a new nano and downloaded the most up to date itunes then I plugged it into my computer and it does not turn on at all, no charge image and my computer doesn't even recognize that there is a connection. How do I fix this?
By calling iPod tech support while you are under warranty. You also have 14 days to return it w/no questions asked for a replacement or your $$$ back.
-
I have a Windows 7 Professional, 64 bits on my computer and have recently installed iTunes 11.1.3.8. but i started having this msg :"The folder iTunes is on a locked disk or you do not have write permission for this folder" issues: how can i solve it?
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
If it won't let you change the permissions use the Owner tab to take ownneship from an account with administror privileges.
tt2 -
I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?
It doesn't say anything. It runs through the sync process like normal and tells me all of the songs that it's synking. But then when it says I can disconnect it, nothing actually synked.
-
My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 minutes).Someone help me as I'm using the original iPhone 3 at the moment and it won't even take an ios 7 update!
Just to confirm on the screen of the iPhone do you see the itunes symbol with a cable pointing up to it?. If you do then your iPhone is inrecovery mode and would require you to restore it.
Now first you want to make sure iTunes is up to date and the cable you are using is not damaged. You also want to make sure iTunes is up to date.
Now if you get an error message then follow the article below to find out what causes the issue:
http://support.apple.com/kb/TS3694
In terms of the iPhone 3G that is definitely not able to update to iOS 7. Only the iPhone 4 and larter can update to iOS 7. -
My ipod when i cut it on shows the ITunes icon and the usb plug icon on my ipod screen. so I plugged it into my computer and when it took me to the Itunes menu it says I needed to reinstall the proram to the manufactures settings and upgrade. My Ipod appears to be whiped clean. I does nothing now. It didnt reinstall or upgrade at all. I have 2 Ipods and I think things got crossed up with them.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem
Maybe you are looking for
-
Is there a "FAST" was to transfer files from an external Hard drive or to an external hard drive?
Hi, I am trying to send 2.5TB of data/movie files from one 3TB external hard drive to another. It says it will take over 24hours. Is there a quicker way or program or app I can use to do this? Thank you
-
I am breathing a sigh of relief that I was able to retreat to FFv3.57 after installing 4. FF4 promised blinding speed, useful tabs and improvements. In reality those cosmetic changes did not compensate for the mess it made of page manipulation. For s
-
Unix or Windows platform for large configuration
Hello, Im working on a scoping phase for a new SAP project. Targeted SAP users will be between 3000 and 4000. Like every time the standard discussion is opened: which platform to use? I would like to go above the classic point of view: UNIX for la
-
So this is a newbie to Mac question... Im looking for an automatic way to print a sample of all my fonts collection on my intel imac with OS X. Anybody knows any suitable software for that? thanks
-
Importing photos fro iPhone 4s to Window 7, how can I rotate/edit?
Every time i try to rotate and save pics it flashes - 'This photo can't be saved because of a problem with the photos file properties'