HT201436 When i call someone, the other person hears echo of his own voice.This happens all the time in all locations.Any help please??
When i call someone, the other person hears echo of his own voice.This happens all the time in all locations.
I am using STC network in Saudi arabia.(KSA) but i have also tried this using other networks in KSA and also with networks in INDIA.
Any help would be highly appreciated. ??
When i call someone, the other person hears echo of his own voice.This happens all the time in all locations.
I am using STC network in Saudi arabia.(KSA) but i have also tried this using other networks in KSA and also with networks in INDIA.
Any help would be highly appreciated. ??
Similar Messages
-
I have OS Maverick; my FaceTime account is activated; when I call someone on FT, I hear it ring and if the person answers we can have a good conversation; all my settings seem to be fine, however, my FT just won't ring or register any miss call.
I HAVE MAVERICK BUT NOT CERTAIN WHICH VERSION.Thanks John UK. I checked the firewall but it set to allow all incoming calls. So, I am still at square one. Any further suggestions?
-
when i call someone i can not hear the phone ring or the people talking. They can not hear me either. what i do notice if i select speaker then i can hear them through the speaker phone only
If there's an Apple store nearby make an appointment with the genius bar to have it checked. Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.
-
When I call someone, we can't hear each other.
When I call someone, we can't hear each other. After several attempts, we can hear.
http://support.apple.com/kb/TS2802
-
Using FaceTime between 2 iPhone 4s I can hear the other person but we only see ourselves, how do we see the other person
Once the connection is made you should automatically see the other person full screen, with a small inset picture of yourself. Normally you only see yourself full screen after you initiate the call prior to the other person accepting it. Are you both connected to wi-fi and are you initiating the call by tapping the FaceTime button on the other person's contact?
-
HT204380 why cant the other person hear me on loudspeaker or facetime?
why cant the other person hear me on loudspeaker or facetime?
Hi there,
Thank you for using Apple Support Communities.
To help resolve this issue where your people have issues with hearing you from your iPhone, please follow the troubleshooting in the article below.
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
Take care,
Alex H. -
i got a used macbook and the other persons apple id is still connected to the macbook. for example i cant update apps unless i have his passwod but i dont wanna pay for apps such as iphoto and more. is there anything i can do? this is a macbook 13 inch late 2008 model
You're going to have to purchase those apps for yourself. The seller shouldn't have left anything he had purchased on the computer when he sold it to you.
-
When I'm working with my Ipad it locks on its own and every several minutes I have to unlock it. Help please
If your iPad was work provided there may be options that they locked out. For example, a privately owned device can be set to never auto lock (last I knew anyway) but it's not uncommon for work or school provided devices to not have the 'never' option.
-
Any help please why nothing happens when I tried to open the icloud control panel for the 1st time.
User name and password are correct.Any help please why nothing happens when I tried to open the icloud control panel for the 1st time.
User name and password are correct. -
When i called someone they can barely hear me
Hi please tell me why they can barely hear me when i called them?
Hey marcelofromtustin,
I found the following recommended steps for when the person you're talking to claims that you sound muffled or not loud enough:
Check the volume setting on your iPhone. You can adjust the volume by pressing the volume up and down buttons on the left side of the iPhone.
If you are using a third-party iPhone case, make sure it is not covering the speaker, microphone, or top microphone. Try making some calls without the case to see if a caller can now hear you more clearly or play music to see if the speaker's volume is better.
If you have not removed the plastic display film used for protection during shipment, either ensure that the microphone and speaker are not covered or remove the film completely.
Check that the speaker, microphone mesh covers, and top microphone hole are not clogged with lint or other debris.
If the speaker, microphone mesh, or top microphone (iPhone 4 only) appear clogged, please use a clean, small, dry, soft-bristled brush to clean them. To do this follow these instructions:
Use the brush to carefully and gently brush the speaker and microphone mesh.
Brush away from the 30-pin dock connector to avoid getting any debris into the dock connector.
If the issue persists, go to: apple.com/support/iphone/service/faq/ for information on service.
via: iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Welcome to Apple Support Communities!
All the best,
Delgadoh -
Have anew netgear router and now mac keeps freezing and iphone wont download e mails. Help
Hello TracyOShea,
It sounds like your Mac is becoming unresponsive for no apparent reason. I recommend starting by resetting your computers SMC:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Then perform a Safe Boot, and then restart the computer again and retest the issue:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Problem solved, when u call someone and they cant hear u and when u only can hear them
hey i had the same problem, look and i fixed it just slightly tighten the 2 screws on the bottom of the phone with the tip of the knife or a small screw driver!! and now my phone works perfectly
guys it really worked trust meHello there, Chlo7.
The following Knowledge Base article has some great pointers for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
What number is displayed when i call someone on sk...
When I call someone with skype to go from my mobile #, Which number is displayed on the receivers caller id....is it my skype # or my mobile #?
Thanks John UK. I checked the firewall but it set to allow all incoming calls. So, I am still at square one. Any further suggestions?
-
I have a 4s,in calls the other phone have echo,plz help me
IN my calls the other phone has echo what i am doing
Hello Raminr2
Check out the two articles below for troubleshooting issues with the echo that is happening. If it is on the other end like you said, have your friends check out the troubleshooting of the first article, as it will have them check the receiver as well as other troubleshooting options. If all is good on their end, then check out the second article to make sure the Microphone on your iPhone is working properly.
iPhone 4S: Noise while on call or using cellular data
http://support.apple.com/kb/TS4225
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Regards,
-Norm G. -
what can i do, when i call someone with mit i-phone, i only hear the other person, when i press the loud-speaker button, does anyone know, how to solve this problem
Does hte iPhone say headphones when you adjust the volume, even when they aren't connected?
If it does, there might be some lint or something in the jack. Take a look at this Apple document -> iPhone: Can't hear through the receiver or speakers
Maybe you are looking for
-
Wont install 10.5.2- has any else had this problem?
Sent computer in for repair did all the updates and only update that wont work is 10.5.2. It talks about a patch and to contact manufactor. Has any one else had this issue or suggestions? Thanks
-
How to view a full screen video in Aperture ?
I am hoping that this is an easy question for someone. When I am watching a video in quicktime, and I press Command-F it expand the video to use all of my iMac's screen. How do I do the same thing in Aperture? Pressing F toggles the full screen mode
-
How do I relocate /Users to an alternate hard disk?
I have an iMac with a small SSD drive where the Mac OSX and applications reside. It also has a second hard drive which as supplied by Apple does not have anything on it. I don't want to fill this up with user files (documents / photos / audio etc),
-
I want to be able to switch to FF3.6 mode like in IE9 we can switch to IE8 mode. Is this possible in FF?
-
Bonjour, je dispose d'une pci-6602, de CVI 6 et de DAQ Traditionnel. Je voudrais diviser une fréquence par 16 à l'aide du compteur 2 (en mode 'toggle', ce qui revient donc à la diviser par 32). J'utilise pour cela la fonction 'FrequencyDividerConfig'