HT204053 If i have safari os x 10.6.8 on my imac 27" and want to back up to icloud should i upgrade
If i have safari os x 10.6.8 on my imac 27" and want to back up to icloud should i upgrade to os x lion? is there a reason not to do this on my mac?
Can you:
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Should you upgrade is your decision. If you don't need the advanced features of Mavericks, then there is no reason to upgrade. If you don't use applications that require Mavericks to upgrade, then you don't need to upgrade.
Note that beyond Snow Leopard you won't be able to run PPC-only applications such as Office 2004.
Similar Messages
-
I have photos in Photo Elements 11 that I want to back up to iCloud, Can this be done
I have photos in Photo Elements 11,not on my iPad, that I want to back up to iCloud, Can this be done?
No. iCloud doesn't backup photos except those that are stored on iOS devices as part of a full iOS device backup.
-
I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
MikeA PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.
-
i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?
i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?
-
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
I have mac 10.6.8 and want to back up everything on DVDs. Is it possible, if it is how can I do it?
Backing up to DVDs is a time-wasting exercise and doesn't provide you with a bootable alternative. I suggest that you invest in an ext FWHD and use something like Carbon Copy Cloner or SuperDuper! to put a bootable backup/clone onto it. See https://discussions.apple.com/thread/4449562?start=0&tstart=0 for more on this.
BTW, don't let the recall notice scare you into getting it replaced immediately. If there's nothing wrong with the HD, prepare for getting it replaced, but only after you've followed all the steps outlined above. FWIW, if you're within 50 miles of an Apple repair station, they most likely will do an onsite repair since it's a desktop machine. -
My iphone hangs any time.I see a call coming but i cannot attend. My call drops anytime and i cant even end the call.The settings page doesnt respond many times.I have given the phone to Apple care , they update the software and return it back to me.IT WORKS FINE FOR 3-4 DAYS AGAIN THE SAME. Its under warranty and i am disappointed with the Apple product and service
If you used your backup to restore the data after it got returned, set it up as new device and don't use the backup data afterwards. It seems that some data inside the backup are corrupt. Follow this article and set up the account info and other setting manually after that:
Use iTunes to restore your iOS device to factory settings - Apple Support -
I have purchased an iPhone 5s today to replace my iPhone 4s and want to purchase applecare for it i cannot locate the registration number to do so. How can i get this number and purchase this
Call AppleCare or if you are near an Apple Store, and purchased your iPhone within the past 30 days, go there and purchase AppleCare+
-
I have a macbook pro 2.2, about six years old. It is running Lion 10.7.5 should I upgrade it?
For optimum performance, install Snow Leopard 10.6.8, to date the most efficient OSX from Apple.
Ciao. -
I presently have Elements 10 installed on PC running Windows 7 and want to install Elements 12.
Should I first remove version 10 then install version 12? Or, does it matter?
Thanks,It doesn't matter whether you unistall it or not because PSE12 will install in its own folder and you will have access to both versions on the machine. In fact, it is a good idea to keep both versions for a short perioid until you get used to the new software. PSE12 has changed a lot from PSE10 in terms of look and feel.
Good luck. -
Bought a new laptop. Have an iPad 4 that I have not updated to iOS 7 yet. I plugged it in, wanting to back it up before I update it, when I right click on the device the ONLY option it gives me is "eject". why?
There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
If that doesn't work, you may just have to wait until they release an update, which should be pretty soon. -
I have my i phone connected to my laptop and am online. I go to icloud and want to back it up. It does nothing??
As deggie said, you are the victim of Activation Lock. Activation Lock is described here:
http://support.apple.com/kb/PH13695
Either you need to contact the previous owner to release the phone from Find My iPhone, or if you cannot contact the previous owner, it is likely you received a stolen iPhone and it will be useless to you. -
I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?
Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility. -
I have connected a new 27"ACD to a 27" iMac (2010) and cannot independently adjust brightness on the external display. Also, the option for turning off the ambient light sensor is not available. The iMac has the latest updates according to Apple messages. Any help will be appreciated.
PNo, Detect Displays had no effect. However, I made the USB connection from the ACD to the iMac after the system was on. Following a re-start, all controls are available. Thank you for your response.
P -
I now own an iPad and want to load bookmarks from Firefox on my PC to my iPad. I have downloaded Safari on to my PC and tried to import the bookmarks from Firefox but every time I try to open bookmarks in Safari it shuts down Safari. As I siad I eventually want the bookmarks on my iPad. Any help appreciated.
KJAre there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.
Maybe you are looking for
-
Package failed with run time error: " GETWA_NOT_ASSIGNED".
Hi, One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error. Here with I am past
-
Problem with applicatio​ns
Hello, I have my Blackberry curve 9300 for 7 months already and a couple of days ago, two of my applications just deleted by themselves - facebook and Blackberry application world. I have tried to reinstalled them so many times but every time, an err
-
Removing white background around image in Illustrator
I used the custom shape tool in Photoshop to make a paw print and then took it into Illustrator and used the Live Trace tool to vectorize it (as the image will be used in an Illustrator file). Now I cannot figure out how to remove the white backgroun
-
DVD colors are shifted to the right.
My computer is a : COMPAQ 100B (XZ846UT#ABA) Desktop PC AMD Dual-Core Processor E-350(1.6GHz) 2GB DDR3 500GB HDD Capacity AMD Radeon HD 6310 Windows 7 Professional 64-bit with a HP vs17e monitor. The DVD drive is listed as a Optical Drive Type: DVD
-
SAP Shipment Reporting of Finished Goods.
Finance Dept. has to provide FG products that have been distributed each month as either Trade Sale or Sample Distribution or Trade product distibuted free. (There is a diffrent Movement type for each). mb51 and ke5z as well as other report are curr