HT204074 I have iPad 3 16 giga I have a problem in access or activate iPad after the update to the iPad ois7.1.2 And asks to activate .
I have iPad 3 16 giga I have a problem in access or activate iPad after the update to the iPad ois7.1.2 And asks to activate .
what is the solution
Did you update via settings>general>Software update? Via iTunes?
Is the iPod connected to the internet via wifi?
Try connecting it to your computer and then try restoring
Is it asking for Apple ID and password?
Similar Messages
-
Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?
If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then. -
I got a new mac with lion on it and I transfered all my stuff from the old mac to the new one. When I went to use iwork the programs did not work anylonger (I do own the disc and tried reinstalling but no good). I found the update for Keynote on the apple site and that solved the problem for keynote. Then I saw the update for the whole iwork program and tried to do that as well but it won't let me run it because it says I have a newer version of Keynote already installed. How do I get the update to work or how do I get the same type of update for numbers and pages individually? Thanks!
Try the following user tip with that one:
Empty/corrupt iTunes library after upgrade/crash -
so i got the update on my ipod touch 5th gen and i got asked me for my old itunes acount and password so i can get the back up from icloud, except i no longer have that info for the back up and it wont let me by pass at all, i need a way to just restart it
You need to recovery and use it. Sounds like you are running into:
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information. -
How do I get the Ap Store to stop showing that I have an update available? I have already purchased the update from the company's site.
A Fix For: App Store Keeps Wanting To Update Apps
-
I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.
I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
I am unable to open Safari. It was working yesterday before I installed the update. The update seemed to be automatic when I restarted my computer. I am running 10.9.5. I don't want to lose my contacts, bookmarks etc if I have to delete the app. Any suggestions?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Try to launch Safari. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I have problem with Access Connections on L412 after that utilyty upgrade
I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.Access Connections is definitely broken for WPA encryption. Both versions 5.02 and 5.84 fail for me. If I use the Windows XP wireless configuration instead of Access Connections, everything works.
Does anyone know how to report this to Lenovo? I chased links around the web site but couldn't find a place. -
I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do?- I really need help!
It sounds as though you have a corrupt project - or possibly a file within an event that is causing the application to crash.
Quit FCP X, then move your projects and events (if you have any) to new folders so that FCP X doesn't find them, then relaunch the application. If it launches OK, there's a very good chance one of your projects or events is causing the problem.
Quit the app again, then move one event or project at a time back to the original folder and launch FCP X again - keep going until you find the cause.
Andy -
July 18,2011 AOL toolbar update install. I cannot open Firefox to uninstall the update or the toolbar because everytime I open Firefox it freezes and jams up. I have to shut down my computer as it will not even respond to force quit command. I cannot read my mail (aol) or access my bookmarks all for work.
Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
You should be able to uninstall that AOL toolbar extension while running in the Firefox SafeMode. -
Why do I have two icons for iMovie '11 after downloading the update from the App Store? Previously I had iMovie '09.
Do you see two versions of iMovie in your Application folder?
You can drag the icons out of the dock and then drag what you want back to the dock from the Application folder.
Matt -
****, I am holding a Iphone 4. I have serious problems for the update of the IOS 5 which will not install. atfer several attemps, ihave error messages 1602, 1604, 2009.
Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
I have an original version of Photoshop CS3. I run Windows 7 32 bit. After an update of the operat
I have an original version of Photoshop CS3. I run Windows 7 32 bit. After an update of the operating system by MS, my Photoshop refused to work, whereas before the MS update, the software worked perfectly. Please help. Ernst
Dear Sir,
I have an original version of Photoshop CS3. I run Windows 7 (32 bit) on my PC. After a recent (±2 months ago) update/upgrade by Microsoft of Windows 7 (32 bit) on my PC, I lost all functionality of the Photoshop software despite the fact that I have been running Photoshop CS3 on Windows 7 for the past 2 years without any problems. I uninstalled the software from my PC and tried to re-install it again. It would not re-install. After I press the software “setup” function to install the software, a window appears and a blue band runs across it, but then everything disappears from the screen again without leaving any message as to why the software would not install.
I have been informed by Adobe Helpdesk that Photoshop CS3 does not run on the Windows 7 OS. Due to previous experience that Photoshop CS3 had in fact run on my PC on Windows 7, I find it totally strange that I could not install the software again.
In fact the, same version of Photoshop CS3 is currently running without any problems on my laptop under Windows 7 (64 bit).
Please help if you can.
Kind regards,
Ernst Odendaal -
I have lost all my bookmarks passwords profile etc after Firefox updated to the newest version today without asking me first. I liked what I had & several times a day it would say there are updates but I closed those popups or messages. Im now using the latest version just so I can have some use while I try to sort this out & get help.
I'm adding that I tried system restore several times .... & my last full backup.... but each time something was corrupted or would not launch or there was no '''.exe '''file in the program folder...Ive never seen this before, & the Mozilla backup I had was useless... it was unable to launch either
-
My Apple TV stopped preparing update about 1/4 of the way into the update. The system says do not unplug your Apple TV while updating. I have waited 24 hours... No change. What do I do?
You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.
Maybe you are looking for
-
Add static background image to all frames of gif animation
First, I'm not a fireworks regular. I use it when I have to to get something done (mostly web optimazations). I would use it more but, frankly in many cases the UI is counter intuitive to everything else adobe makes. Here is my problem... I need to a
-
WRT54G No longer available as Wireless Connection, Cat5 connect without issue
Without changing a single setting I can only appear to go wireless on the neighbors unsecured network OR plug in the old Cat5 leash. My network no longer appears as an option when attempting to connect wireless. It's consistent across two laptops.
-
Hi all, I am a student completing my dissertation and need some help urgently. I have a game that has a main JPanel added to a JFrame and want to add another JPanel to the JFrame which I have done successful. The problem is the new JPanel, which is t
-
Hi All, I have the I-Base Number. Can someone pls tell me the flow of tables to get the component # & Component Serial # having the I-Base Number.
-
When I take pictures on my phone, I can't see them until I sync my phone to my computer, even if I go into ' Photos ' all I see is pictures I took weeks ago. What should I do?