HT204088 i was told to re-down load the 7 ringtones that i had already purchased and i wouldnt be charged for them please reverse the charges

i was told to go in and re down load the ringtones i had purchased in the past and i would'nt be charged again so please reverse the charges

These are user-to-user forums, you are not talking to Apple here. Who told you to re-download them ?Ringtones are currently a one-time only download, so Apple would need to grant you a re-download.
You can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

Similar Messages

HT1212 how do you authorize computer to down load songs off itunes that I have already purchased

how do I authorize my computer to down load songs off itunes that I have already purchased

iTunes Store: About authorization and deauthorization

My I phone was down loading the latest update to O S 7.o and it froze showing an I tunes icon and the wire connection to the charger. My phone is not working now.

My I phone was down loading the latest update to OS 7.0 and it froze showing an I tunes icon, and an arrow pointing to the cord used to charge and download.
I can't use the phone now its frozen in this screen.

Hello, Indy car fan.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

TS1367 I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen

I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen

Welcome to Apple Discussions Dathanb
You have posted in the Feedback About New Discussions forum.
As you are a first time poster, you seem to have missed the text at the top of this forum that says:
Please Read This Before Posting Here
If your question concerns a hardware or software technical issue, please do not post in this forum
Go to the main Apple Discussions page, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the POST NEW TOPIC link. Because your post doesn't indicate was OS you are using on your iMac, I can't give you a link to the most appropriate forum.
Basically, though, the version of TechTool on the AppleCare disks is not compatible with newer versions of OS X and/or Macs (I can't remember which). If you don't get a satisfactory response by posting in the appropriate iMac or OS X forum, I suggest you take your iMac to the geniuses at the Apple Store. You can set up an appointment time for the same day online before you leave home.
Peggy

HT202681 i have down loaded the latest version of abode flash player and i still keep getting a blocked plug in message

please help with blocked plug ins i have down loaded the latest version of abode several time and am not getting anywhere this seems to be an ongoing problem when i get updates from them

When you download from the Adobe site, despite the button saying “install” — it really doesn't do anything but download the installer.
Quit the Safari browser. Next to the Trash icon on your Dock, is an icon that is an alias to your Downloads folder. Click this icon once. There will be a list of previous downloads that pops up. The file closest to the Dock is the Adobe Flash installer. Click this once to launch it. It will display like this:
Double-click the red flash folder. This produces the following dialog — you select Open.
You will receive a password challenge. Use your Mac OS login password. You next prompt will look like this. Choose the middle selection as I have shown:
The Adobe Flash Player will download and install via a blue progress bar. You will need to click a Finish button, and then Safari launches taking you to the Adobe site to verify Flash Player was installed.
In System Preferences, the bottom panel now has an Adobe Flash Player preference panel. It has an Advanced tab that enables you to check if there are newer releases of Adobe Flash available, and it wil also fetch the installer for you (usually). The System Preferences panel, and Safari must both be closed for Flash Player updates to succeed.
Eject the Adobe Flash Player installer from your Desktop.
Once Flash Player is installed, you may need to open Safari Preferences > Security, and check Internet plug-ins: Allow Plug-ins. Click the Manage Website Settings… button, and then select Adobe Flash Player in the left panel of the pop-up. You want Allow set When visiting other websites. Click Done, and close Safari Preferences.

My system needs internet explorer for a application I need to down load, however I need to down load the latest yahoo tool bar for internet explorer to work properly and firefox will not allow the down load of yahoo toolbar. How do I fix this?

I have not used Internet explorer since downloading firefox and I need IE for a trading platform that I need to use. In order to get IE working I apparently need to down load the latest version of Yahoo toolbar, however when I try to down load the tool bar Firefox will not allow the down load of that file.

Thank you so much, for once in my computer life I knew what the problem was, what caused it, why it was caused, what it did, what it made it do and most importantly how to fix it and to do it correctly and expeditiously. I can not Thank You all enough for all of the help! I also have Pogo mailed this to all on my friends list, where they have all learned as I have and have fixed theirs also. and the message is being spread. Thank You again, I just can not say it enough.

How can I down load the previous version?

I was trying to download Firefox 4 and realized that my OS will not support it. Unfortunately, my old Firefox is gone. How can I down load the previous version?

You can get all previous versions for firefox on this link [http://www.filehippo.com/download_firefox/ link text] You can also get older software versions for almost anything.

HT1766 I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be comp

I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be compctable with new soft ware. I do bnot agree with their finding because i have I phone with ISO 7 updated soft ware and same files run on my I phone but not on I Pad. This was working fine before updating new software. This device is useless for me if i can not watch the program that i bought this for. I want device to replaced or taken back by the company. Thank you

Here are the iPad Mini specifications:
iPad mini - Technical SpecificationsNov 1, 2012
The specifications explain exactly what types of files are supported under "TV and Video".

Incuured problems after downing load the new iOS5...lost items

Since down loading the iOS 5 I have lost all my music, photos and Apps I purchased prior! What do I need to do to recovery them ( I do not have icloud on) or how do I recover them. My carema shows no views on the screen of the what the photo to be taken looks like either, iti s just dark, once you snap a photo you can see what was taken ....after the fact...

Hi Eric.
The 10.10.2 Combo Update is working fine!
But my old problem with Safari is still hear... I'm using Safari 8 and Yosemite 10.10.2 now, but still some sites (iCloud.com, outlook.com, Pinterest, Garmin, Google, ) informs I'm using a non supported version, like Safari 4.
If you have any suggestions I would appreciate.
Thank you for your Help!

I have got iphone v.4.1, i bought bowling game (US$ 0.99), due to version problem i could not down load the same (not compatable), pls let me know how to proceed further.

I have got a iphone 3 GS version 4.1, i download bowling game (US$ 0.99), due to version mismatching i could not down load the same, i already paid for the same, please advise how to proceed the same.
i have been told not to update my iphone to new version, otherwise it will be locked forever.
please help me.
chandrru iyer

Help with what? It's YOUR responsibility to READ the requirements for any app you want to purchase. They are clearly stated on the app's info page. So, either update your phone or beg iTunes support for a refund:
http://www.apple.com/support/itunes/

I started to update my macbook pro and was told i needed to restart, which i did. that was about 6 hours ago and all i see is an apple and a rotating circle. what do i do?

! started to update my system and was told to restart. I did. it has now been about 6 hours and all i see is an apple and a rotating circle. what is happening?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

How to down-load the discussion forum portlet??

I am willing to download the discussion forum portlet from the
portalstudio site.
For that i was suppose to download and install WinCVS first.
I did that but while setting-up the cofiguration.
I had to enter my login name and password,provided by the
otn.oracle.com
WinCVS refused to recognize the login name
i m unable to understand the problem .
And i do not have any other option for downloading the
discussion forum portlet.
Is there any other way to download it
or is there something else ,which is to be done while
installing the WinCVS

Hi,
All the Materil master data is there in some of the tables.
                MARA               Material master
     MAKT                Material text
     MARC               Material per plant / stock
     MVKE               Material master, sales data
     MARD               Storage location / stock
     MSKA               Sales order stock
     MSPR               Project stock
     MARM               Units of measure
     MEAN               International article number
     PGMI               Planning material
     PROP               Forecast parameters
     MAPR               Link MARC <=> PROP
     MBEW               Material valuation
     MVER               Material consumption
     MLGN               Material / Warehouse number
     MLGT               Material / Storage type
     MPRP               Forecast profiles
     MDTB               MRP table
     MDKP               Header data for MRP document
     MLAN               Tax data material master
MTQSS               Material master view: QM
So, down load as per your requirement in to Excel sheet and do the corrections and Upload with your Data Migration Tool.
Hope this helps..
Regards,
Siva

I down loaded the Aperture trial from the internet. I bought the Aperture 3. I put the Apple Product Serial Number in the box. However when I open the Aperture 3 program, it still says Aperture 3 Trial Library. Is this normal?

I down loaded the Aperture trial from the internet. I bought the Aperture 3. I put the Apple Product Serial Number appropriate litlle box. However when I open the Aperture 3 program, it still says Aperture 3 Trial Library. Is this normal?

Hi TD,
Thank you for the quick reply, very helpful. Now I can sleep in peace and without worry. I had transferred 30.000 pictures and was a little worried.
Kind regards,
Peter.

Since i have down loaded the new software my wifi does not work I have been to a apple store and they said it is a hard ware issue I do believe it is not my fault has the wifi workded before cheers Ben..

Since I have down loaded the new software my wifi does not work. I have been to a apple store and they said its a hardware issue. My phone was fine before the down load.

What is your technical support question for these user to user technical support forums?

I am trying to load a 2006 package in cd form onto my apple mac when I try and down load it it comes up in like foreign script, and says does not operate dos, can anyone help I am a lot of a novice. grateful - Carol

Yes Im a lot of a novice so be patient with me lol I am trying to put a 2006 Edition of a weight programme on my laptop, but when I down load it it just comes up in weird script and says cannot operate in Dos mode can anyone help.
Thanks

Welcome to Apple Support Communities.
Sounds like you have a program designed to run on Microsoft Windows, or even older (1980's) MS-DOS, rather than Mac OS X. If you have Windows on your Mac installed via Boot Camp, try booting into Windows first, and then loading the CD. If you don't have Windows, it's probably cheaper to buy a new program designed for Mac than to purchase a copy of Windows (US$120 or more), not even knowing for certain if your old program will run.

HT204088 i was told to re-down load the 7 ringtones that i had already purchased and i wouldnt be charged for them please reverse the charges

Similar Messages

Maybe you are looking for