TS1367 I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen

I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen

Welcome to Apple Discussions Dathanb
You have posted in the Feedback About New Discussions forum.
As you are a first time poster, you seem to have missed the text at the top of this forum that says:
Please Read This Before Posting Here
If your question concerns a hardware or software technical issue, please do not post in this forum
Go to the main Apple Discussions page, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the POST NEW TOPIC link. Because your post doesn't indicate was OS you are using on your iMac, I can't give you a link to the most appropriate forum.
Basically, though, the version of TechTool on the AppleCare disks is not compatible with newer versions of OS X and/or Macs (I can't remember which). If you don't get a satisfactory response by posting in the appropriate iMac or OS X forum, I suggest you take your iMac to the geniuses at the Apple Store. You can set up an appointment time for the same day online before you leave home.
Peggy

Similar Messages

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Installed Photoshop Elements 13. Upon activation, get through sign in screen, but when doing serial number validation, validate goes round but does not validate. Connect Later is only way out of screen. How do I validate. Checked account but product n

How do one validate Photoshop 13. (Windows 8) Upon activation, get through to sign in screen, but when doing serial number validation, validate goes round but does not validate. Connect Later is only way out of screen. Checked account but product not listed. Installed with serial number that was sent by Adobe. Have attempted numerous times at different times of the day. On-line connection working.

Have you bothered to do any research at all? Not every app was upgrade to 5.5. Those that weren’t will next be upgraded to CS6.
Bob

TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
 Cheers, Tom

I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music? Any ideas on how to correct this?

I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
Any ideas on how to correct this?
Thanks-Vitaleyes

I don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset. My Blueant T1 does support it and plays the music through the deadset.

Moved 8.1 - Nodemanager starts but does not work... SSL problem..

Hello!
We moved our weblogic 8.1 installation to a new production machine (which used to be very easy with weblogic 5.1) but of course, it didn't work because of the SSL demo certificates which were tied to the old server name. It dumped the following line on the log and refused to work:
...Certificate chain received from localhost - 127.0.0.1 failed hostname verification check
We changed our demo certificates as stated in the documentation (certgen, keytool...) and now it starts ok but does not work either. Now we are seeing the following expection on the logs:
weblogic.nodemanager.NodeManagerException: [SecureCommandInvoker: Could not create SSL Socket Factory, reason - java.lang.NullPointerException]
at weblogic.nodemanager.client.SecureCommandInvoker.init(SecureCommandInvoker.java:67)
at weblogic.nodemanager.client.CommandInvoker.invoke(CommandInvoker.java:89)
at weblogic.nodemanager.client.NodeManagerClient.executeCommand(NodeManagerClient.java:161)
at weblogic.nodemanager.client.NodeManagerExecuteRequest.execute(NodeManagerRuntime.java:1605)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
No Exception Messages
Any clue or idea?
Thanks in advance!
Bernardo Riveira

I have seen this myself moving domains to a different server. The way I got around it was to set the Hostname Verification for the admin and managed servers to None. This is done via the admin console, SSL tab, Advanced.

CQ62-209wm turns on but does not boot stays on black screen

This same question was asked in 2013 but was never marked answer found. The suggested answer was to run the diagnostic tests on the hard drive and memory. My laptop has the exact same problem and I did perform the tests. Everything passed with no problem. I finally decided that the video had gone out hence I had a bad motherboard. Well I ordered a new motherboard, new battery, and new memory. I pulled the heat sinks cleaned the CPU, cleaned the fan and cooling fins, then replaced everything. Guess what folks it is still doing the same thing as before with all these new parts. No beep codes are generated, no sounds etc. What does happen is the Caps Lock light flashes about every 3 seconds and the WiFi symbol light stays orange. It never blinks. I found the light codes page accidently but there is no corosponding pattern between the light codes and the blinking cap lock key. It will just sit there and blink as long as you will let it or until the battery goes dead which ever comes first. This same problem has been around for years as I have found a multitude of posts concerning it and it is not just this one model. Forums everywhere have this posted on them.
So how about it HP engineers. Are there any of you willing to take on this problem and tell us how to fix it once and for all? I am tired of having a computer that only works when it wants too. I want both of my CQ62-209wm laptops to work. I am able to get the laptops to boot completely about 35% of the time. In order to make them work I remove the battery, plug in the power supply, replace the battery and then try to start it. Sometimes it works majority of the time it doesn't. I am beginning to suspect a possible problem in the power circuit because this is the first laptop I have ever used or owned that would not power on if there was no battery installed.
This question was solved.
View Solution.

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Laserjet 1018 paper feed problem - started suddenly and now wrinkles paper but does not feed it in

This HP Laserjet 1018 is 4 years old, has worked flawlessly. But a day or two ago it fed a sheet of paper, there was a ripping sound, and the paper emerged, printed, but with a 1/4" wide, 5" long missing bit near the bottom, running the long way of the paper. I found and removed the crinkled up torn strip of paper, and have restarted this printer numerous times. Since that incident, it refuses to feed paper correctly, but bunches it up and wrinkles it a bit from the left to right and does not feed it in. Thus, won't work. I can't see any broken parts or anything stuck inside -- and taking this printer apart is v. complicated -- no easy panel to remove to see the feed mechanism. I'm doubtful I can take it apart enough, and still get it back together. I've cleaned the feed roller (small half-round gray rubber thing) and it does not seem to be the problem.
Questions:
a) anyone experienced, and solved this problem?
b) is it worth trying to send this for repair (I got it on special for $69, and the replacement equivalent now appears to be the HP P1102w, which is selling via Amazon for $94.99
Thanks

Hi. Thank you for your post.
The following link at the HP Customer Care web site may provide some help on the paper feed issues you are seeing.
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodS...
Although I am an HP employee, I am speaking for myself and not for HP.

P7-1446s powers on but does not boot (no video output)

Hi everyone, I've got a tricky issue with my p7-1446s.
Specs: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03500676&cc=us&dlc=en&lc=en#N90
Was running 8.1 at time of death.
The fans spin, the power light in the back is a solid green, and the disc drive opens and closes.
The backlight of the front on/off button does not turn on when the PC is powered on (it's typically backlit green for active use or orange for sleep). This button will power the PC on, but doesn't turn it off.
I've tried multiple monitors (DVI and VGA), unplugging the hard drive and starting with a boot disc in the drive, and plugging in a video card, to no avail.
I'm getting the impression from solutions to similar problems on other computers that this is a this is a CPU or motherboard issue - is this something reflowing could solve?
Thanks,
Dan

Hello dmj53,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand your computer is getting power and yet not starting. I am providing you with an HP Support document: Computer Does Not Start and Emits an LED or Beep Code that should be able to help you identify what is going on with your computer. If you are not getting any flashing lights or beeps then I would thinkit would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
As your computer is not that old and may be yet under warranty. I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Pavilion G6 2249WM powers on but does not boot - black screen

I have a G6 2249wm that had a message that the fan wasn't working. I had the fan replaced and after it was replaced it would not boot. I could hear the fan running and the caps lock light blinked once about every 5 seconds and the amber wifi light was on. After researching and taking steps outlined in the HP Computer does not start (Windows 8), I found that the code meant that the CPU was bad. I had that replaced and the notebook is still in the same condition. Is there anything else that I can do to get this computer to work?
Pavilion G6 2249WM C2N47UA#ABA AMD A6 - 4400M
After troubleshooting a little more I find that when the laptop is started the hard drive does not turn on. I used a USB adapter to plug the hdd into my desktop and found that it does work. I then plugged a different hdd that I know works into the laptop and found the same issue. Does this mean that the motherboard is bad?

Hello @FLC123,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand that your notebook computer is producing a blinking light from the caps lock, and that the screen is blank. I would be happy to help you!
Since this symptom code is appearing after you have replaced the CPU, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I made changes in the single user mode - now my MacBook Pro does not boot anymore.

Hello apple support community,
I made changes in the single user mode and my MacBook Pro does now not boot anymore. It displays a grey bar and the "work in progress" wheel. My intention was to change my admin password following these steps:
http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
however, I have to admit that there was a typo sneaking in - oops!
Any idea how I can undo changes made in the single user mode?
Thanks in advance for your support - I hope I don't sound to nooby
Till

Hello, Till1234.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Cheers,
Jason H.

MDSD 2.1 application starts but does not respond

Hi,
I am having a problem with the DSD application on a mobile device.
I have loaded the:
JVM
DB2e
MI
MDSD 2.1
onto the mobile device (the mobile has been restarted after each application has been loaded)- the backend has been confiereged using the configeration guide.
When I start the application in MI by selecting the MDSD button the mobile device shows a processing icon (like egg timer) but progresses no further and does not exit this state.
In addittion I cannot locate any error logs that identify why the application has appeared to stop.
Help on this would very much be apprechiated!
Thanks James

hi
The trace file;
[20090608 11:05:39:917] I [MI/API/Logging           ] ***** LOG / TRACE SWITCHED ON
[20090608 11:05:39:917] I [MI/API/Logging           ] ***** Mobile Infrastructure version: MI 70 SP 15 Patch 3 Build 200903191315
[20090608 11:05:39:917] I [MI/API/Logging           ] ***** Current timezone: GMT[20090608 11:05:39:917] I [MI/API/Logging           ] ***** Current Trace Level: 50
[20090608 11:08:45:260] E [MI/CCMS                  ] Config Info: /Windows/Start Menu/MIServer.lnk
[20090608 11:08:45:263] E [MI/CCMS                  ] java.io.FileNotFoundException: /Windows/Start Menu/MIServer.lnk
java.io.FileNotFoundException: /Windows/Start Menu/MIServer.lnk
     at java.io.FileInputStream.<init>()
     at java.io.FileInputStream.<init>()
     at java.io.FileReader.<init>()
     at com.sap.ip.me.ccms.configinfo.ConfigInfoCollector.addMobileEngineLnk()
     at com.sap.ip.me.ccms.configinfo.ConfigInfoCollector.addConfigInfoToContainer()
     at com.sap.ip.me.ccms.configinfo.ConfigInfoCollector.createConfigInfoContainer()
     at com.sap.ip.me.ccms.configinfo.ConfigInfoCheckerInboundProcessor.process()
     at com.sap.ip.me.sync.SyncManagerImpl.processSingleContainer()
     at com.sap.ip.me.sync.SyncManagerMerger.processInboundContainers()
     at com.sap.ip.me.sync.SyncManagerImpl.processSyncCycle()
     at com.sap.ip.me.sync.SyncManagerImpl.syncForUser()
     at com.sap.ip.me.sync.SyncManagerImpl.processSynchronization()
     at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend()
     at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend()
     at com.sap.ip.me.api.sync.SyncManager.synchronizeWithBackend()
     at com.sap.ip.me.awtapps.home.Home.doSync()
     at com.sap.ip.me.awtapps.home.HomeFrame.doUserActionSync()
     at com.sap.ip.me.awtapps.home.HomeFrame.userActionSync()
     at com.sap.ip.me.awtapps.home.HomeFrame.access$000()
     at com.sap.ip.me.awtapps.home.HomeFrame$SyncThread.run()
     at java.lang.Thread.run()

After importing received and set messages from Opera Mail, Thunderbird works fine but does not save sent messages to Sent folder, even though messages are sent

I successfully imported messages from Opera Mail. Initially the Sent mailbox was not showing in Thunderbird. A quick removal and fresh installation solved that, but Thunderbird does not save the sent messages to the Sent box, where the imported Opera Mail messages are stored. Even though messages are not saved, they are sent correctly. The image attached shows the error message.

Probably a name-confuse If you store sent on mailserver it has to have the right name. (subscribe)
You could set up under Account settings / copies and folders (maps) Sent pointing to the right local folder.

Mail starts, but does not open.

The top bar is available, with most functions, like "New Message" grayed out. Tried tossing out preferences, but did not work. I've restarted multiple times to no avail. Please help.
Internet accounts in System Preferences also errors out, with or without Wi-Fi.
Is there any way I can just "restart" Mail from scratch?

I don’t understand what you say about having seen the same problem in another thread.
Problems arising right after installing a system update are usually the result of some filesystem corruption that should have been fixed first, or not having installed the update properly (e.g. applications running while installing it), or having ignored Apple’s "Important: Please read before installing" warnings, etc.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, reinstall any updates that may not have been installed properly. You may also have to reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using (actually, if you’ve reinstalled Mail, you have to also reinstall the Combo Update anyway), unless this is the version of Mac OS X that came with your computer:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

TS1367 I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen

Similar Messages

Maybe you are looking for