HT204291 I must continually disconnect and reconnect my airport express to get it to play my iTunes library on my TV. Why?

Why must I continually disconnect and reconnect my airport express in order to get it to play my ITunes library on my TV?

I have a HP Pavillion dv6000 running Windows Vista. Itunes is up to date. I have power cycled the router several times it is a Surfboard sbg6580. still no luck with seeing the airplay symbol on itunes, but Isee it on my phone and can stream music via the airport with my phone. I can see both airports on the airport utility on my laptop. I'm stumped...

Similar Messages

My gmail account continually disconnects and reconnects every few seconds.

I am using FF 19.0.2. I have multiple gmail accounts. One of them continually disconnects and reconnects every 5 to 10 seconds. It only happens with the one account. It only happens in Firefox. I am using Windows 7 64 bit.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Why do I have to switch off and on my airport express to get the Ipad to recognise it?

Why do I have to switch off and on my airport express to get the Ipad to recognise it?

Lion may have replaced files that partially made up your printer drivers. Either way, HP saw fit to make a new set of drivers specifically for 10.7 so you may want to use it simply to avoid any bugs tehy found.
Get it here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-98095-2 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
Hope I helped

Must disconnect and reconnect earbuds to restore audio

I've noticed that if my iPod Touch shuts down on its own, when I turn in back on the volume slider doesn't appear. I have to disconnect and then reconnect the earbud plug in order to see it and to allow audio output through the earbuds. I'm using 4.1 now, but this has been going on for several months. Anybody else notice this and know what's going on? It's a 2nd generation Touch.

Stephen Patriquen1 is correct: the link given by allen a does not address the problem described in the header by ChubbyCherub, namely "The software for the iPad was corrupted during download. Disconnect and reconnect, then try again."
Like ChubbyCherub,I have faithfully and completely followed all the troubleshooting directions given, including also unplugging USB devices, even though I don’t believe any of them are relevant to a corrupted download, and repeatedly re-tried the download, to no avail.
So what is required, allen a, is a solution related to the original question that doesn’t involve doing the same thing over and over in hopes of a different outcome.
In the meantime, my iPad has been stuck in recovery mode for days.

Several times a day my HP Laptop disconnects and reconnects to my WRT600N router.

I’ve installed a new WRT600N. (Firmware Version: 1.01.35 build 5_20080115).
My install was a “Linksys EasyLink Advisor” guided and is generic. SPI Firewall Protection is enabled. Security Mode is enabled for WPA-Personal.
The laptop I use with router is an HP/Compaq 6710b (also new), running XP Pro. The built-in WiFi adapter is a “G” type (Intel PRO/Wireless 394ABG) with “Windows Wireless Network Connection” enabled.
Presently I don’t use the “N” capability of the router. However, I plan buy a 2nd laptop with an “N” WiFi adapter soon.
The router works well…most of the time. Signal strength is “Very Good”. However, several times a day my HP Laptop disconnects and reconnects to the router.
Each time this happens I get a “Linksys EasyLink Advisor” prompt stating “Network Problem!...the connection to the router is not working”.
After experimentation I realize that most often the connection will restore by itself…or worst case; I can re-detect and restore the connection using either the “Linksys EasyLink Advisor” wizard OR the “Windows Wireless Network Connection” wizard.
Besides losing the connection, the most annoying part of this is that after the connection is restored and the “Linksys EasyLink Advisor” wizard message remain indicating: “Network Problem!...the connection to the router is not working”.
Suggestions?

There are many causes for poor wireless connections, and many solutions:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
If the above does not fix your problem, download and install the latest driver for your wireless card.
Some users have reported improved wireless performance by switching from WEP to WPA encryption.
If you continue to have problems, try the following:
For wireless n routers, try setting the "n Transmission Rate" to 162 Mbps, and the (wireless g) "Transmission Rate" to 54 Mbps.
If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Hope this helps.

Time Capsule disk disconnect and reconnect every 5 minutes

This problem began with Airport Firmware 7.6, and has continued to perist with every subsequent firmware version. Reverting to firmware version 7.5.2 eliminates the problem. Running with the latest firmware version 7.6.3, on OS X 10.8.2, the Time Capsule disk is disconnected and reconnected every 5 minutes, and this is seen in the console log:
15/02/2013 16:10:22.344 KernelEventAgent[43]: tid 00000000 received event(s) VQ_NOTRESP (1)
15/02/2013 16:10:22.344 KernelEventAgent[43]: tid 00000000 type 'afpfs', mounted on '/Volumes/Vilya', from '//Mike%20Connally@TimeCapsule._afpovertcp._tcp.local/Vilya', not responding
15/02/2013 16:10:22.000 kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 190 on so 0xffffff804456ede0
15/02/2013 16:10:22.000 kernel[0]: ASP_TCP asp_tcp_usr_control: invalid kernelUseCount 0
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Vilya prevTrigger 190 currTrigger 191
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Vilya
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/Vilya
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Vilya
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Vilya
15/02/2013 16:10:22.345 KernelEventAgent[43]: tid 00000000 found 1 filesystem(s) with problem(s)
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: Logging in with uam 13 /Volumes/Vilya
15/02/2013 16:10:22.651 KernelEventAgent[43]: tid 00000000 received event(s) VQ_NOTRESP (1)
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Vilya
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: get the reconnect token
Has anyone found a solution to this, other than reverting to Airport Firmware 7.5.2?

Welcome to the club.. there is a very long thread.. here.
https://discussions.apple.com/thread/3526741?tstart=0
There seems to be any number of factors.. where the solutions are little silly things..
Start from the end of the thread and work backwards as this has been ongoing for a long time.. and experience has improved.
What you are seeing btw is the change apple made in Lion and 7.6 to higher security version of AFP.. but it is a mess IMHO.. and has not worked at all well.

Have an iMac 2008/09 on starting today I have a white screen, an apple icon and a constant rotating sun, nothing else. I've tried turning off and disconnecting and reconnecting the power lead with the same results. Any thoughts? Many thanks Matt

Have a 2008/9 iMac on starting up today I have only a white screen, apple icon and a continuous revolving sun. Have tried turning off and on and disconnecting and reconnecting the power with no affect - any thoughts or advice please. Thanks Matt

If your iMac came w/system DVDs, do the following:
Disconnect all devices from the computer then do the following:
Boot up from your DVD that originally came w/the iMac while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.

Controller keeps disconnecting and reconnecting

Hi thereI have recently had a problem with my Dualshock 4 controller connecting to my PS4. I took ps4 to my dads while i was staying there and everything was fine. Since i returned home i set up ps4 as normal but my controller keeps disconnecting and reconnecting itself. It is not a charge issue as it has been charging for 2 hours now. I am just sitting on the home screen now and controller is plugged in by usb cable and just keeps connecting and reconnecting but remains on charge when it disconnects. Any help would be much appreciated

Turn off the PlayStation 4 by pressing the power button on the front panel. The power indicator will blink for a few moments before turning off.Once the PlayStation 4 is off, press and hold the power button. Release it after you've heard two beeps: one when you initially press, and another 7 seconds later.Connect the DualShock 4 controller with the provided USB cable and press the PS button on the controller.Choose option 5 rebuild database.For home hub. Open the web browser on a computer or device connected to your Hub and go to http://bthomehub.home to open the Hub ManagerClick on SettingsEnter the admin password. Unless you've previously changed it, you'll find the default password on your Hub settings card on the back of your Hub. If you have changed it and now forgotten it, you can use the password override feature to set up a new passwordClick on the "Advanced Settings" tab, then click Continue to Advanced SettingsClick on the "Wireless" tabTo manually select the wireless channel for the "2.4 GHz" band:Go to the 2.4GHz page and select a channel from the drop down menu next to "Wireless Channel". First try channels 1, 6 or 11Click Apply to confirm the change. Then wait 60 seconds for your computer to automatically discover the new settings. There's no need to change any settings on your computer

HomeHub 2 disconnects and reconnects after 4pm eac...

Every day at roughly 4pm my home hub has started disconnecting and reconnecting, this continues most of the evening then it seems fine the next day.
After looking at past post i have looked into the settings on my hub and copied which i will paste below.
any help very much appreciated
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:05:20
Downstream
4,608 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Fast
Noise margin (Down/Up)
6.2 dB / 10.0 dB
Line attenuation (Down/Up)
50.0 dB / 28.5 dB
Output power (Down/Up)
19.1 dBm / 12.6 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
1 / N/A
HEC Errors (Down/Up)
N/A / 0
Error Seconds (Local)
1

connection time is only 5min is that due to manual reset or router dropping connection? are you using wired or wireless for your devices I ask because it the router was dropping connection as often as you say I would expect your connection to gave moved to interleaved instead of fast your noise margin at 10db is higher than normal 6
try quiet line test dial 17070 option 2 should be quiet and best with corded phone
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

When leave I nano 4th gen connected to either of my cars it no longer restarts playing when car is restarted. Instead it shows 'no entry' in the song title on the car audio display and won't play until disconnected and reconnected.

Nano has worked fine for a couple of years being left connected to either one of our cars. However, every time car is restarted it won't play without being disconnected and reconnected. I have done a full restore.
Current cars are Range Rover Sport 2011 and Jaguar XK 2011.
Has anyone else experienced this issue?
Thanks,

I had a similar problem. Try resetting and erasing the phone and restoring from a known good backup.

TS3474 iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

What do I do about this message? I've restored it 3 times, but this message still comes up, and i cannot put music on it now.
iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.

In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again.

In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.

I have same error except that i get it even when my phone is not connected.

Podcasts no longer appear under ipod device in I tunes library. I can access podcasts on my ipod but I CANNOT access podcasts on I tunes library. I have disconnected and reconnected. I have restored my ipod. I have checked for updates. What else?

'Podcasts' under Ipod device disappeared in Itunes library. I can't manage my podcasts on ipod via I tunes library. I can access the podcasts on my ipod (5th generation), itself. I can access and manage music. I can add more podcasts to ipod. The podcast icon reappears with only the newly added podcasts. When I disconnect ipod and reconnect ipod, 'podcasts' no longer appears under the device. So I am unable to manage my podcasts on I tunes library which means I can't delete podcasts from I tunes library. I can only add podcasts. I have disconnected and reconnected ipod. I have checked for updates. I have restored the ipod to it's original settings. My next step will be to install and reinstall I tunes. Any other suggestions would be appreciated.

To be clear, the podcast icon disappeared under Ipod device in Itunes. I can access and manage the podcasts in the itunes library. I can't manage podcasts on my ipod via itunes (which means I can't delete podcasts from my ipod). I can access podcasts on my ipod, itself.

How can I troubleshoot this problem with the iMac keyboard? My keyboard disconnects and reconnects within seconds but all the typing is lost while it was offline. This is usually 5 seconds or less but happens 2 or 3 times in a minute. Annoying!

My wireless keyboard disconnects and reconnects within seconds but all text that was typed during the time offline is missing. i have to go back and retype missing parts. What can I do to troubleshoot this. The computer is only about six month old. This problem is new in the last couple weeks. Thanks for suggestions.

Beat me to it, Donald. But there is a possible alternative. If the batteries have been replaced since new, were they replaced with the same batteries or another make. There are examples around which do not fit perfectly and leave a certain amount of movement inside the battery housing. That could lead to instability such as the OP describes.

If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

1. Why don't you purchase it from Apple? I'd be wary with eBay sellers - and, after all, Apple posts their stuff everywhere, even if you live in a country without a localized Apple store webpage or local (physical) Apple stores.
2. when it comes to adapters / cables like these, NEVER purchase ANYTHING non-Apple-manufactured! Most of the cheap(er) knock-offs don't work! That is, don't try to save on going for a cheaper alternative - it most likely won't work.
Here are the links:
http://store.apple.com/us/product/MD098ZM/A
http://store.apple.com/us/product/MC552ZM/B

HT204291 I must continually disconnect and reconnect my airport express to get it to play my iTunes library on my TV. Why?

Similar Messages

Maybe you are looking for