HT204368 I have a Tango TRX bluetooth speaker that is suddenly not able to connect to my New iPad. It worked fine for a few eeks and now I get the previously unseen "This device not supported by iPad" message. It was supported for three weeks. Thanks
Most of the question is in the discussion header. I have a Tango TRX bluetooth speaker that worked fine for three weeks with my third generation iPad. I started having trouble connecting and recieved the "not supported by iPad" message. It connects just fine until I open any app that requires sound and at thet point I recieve the message and the device disconnects. The Tango still pairs flawlessly with my laptop which is not an Apple product. How could a product suddenly become unsupported?
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.
Similar Messages
-
I changed a few settings on my iPad and now cant get the iPad to shut off with the shutoff button and the button to get to all the icons won't let me get back to settings to change the settings back. Can anyone help?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
When I try to export an iMovie (9) to quicktime, the iMovie runs for a few minutes and I then get the message: The movie could not be exported because an error occurred. (-2125) What can I do to correct this?
Trash your preferences. Trash your project render files. Switch off background rendering. Export without using the computer for anything else.
Oh, and if you're using 10.9 switch off App Nap. -
I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"
Why should I have to spend money to solve this problem? Many others have the same concern, Airport Utility 6 does not support older Airport Express units. This is Apple's problem. I've tried many solutions proposed on the net but none worked. I'm still trying for a work around.
-
I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
i have a few small videos on my phone that can be viewed perfectly well and they transferred onto my ipad and were ok for about a week and now i get the message resource unavailable ? any suggestions
i have a few small videos on my phone that can be viewed perfectly well and they transferred onto my ipad and were ok for about a week and now i get the message resource unavailable ? any suggestions
-
i have a old i pod that i use to used and i stop useing it for a few years and now i have a i phone and i want to put all my music on my i pod in to my iphone and it would not allow me to do so what can i do
You need to move the music from the iPod to your iTunes library on your computer then sync with the iPhone.
Assuming you have a PC you can use this: http://www.yamipod.com/main/modules/home/ -
HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and now im getting the error message as "PDP authentication failure" Im using Aircel carrier.
Please let me know how to fix this issueupdate...
I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
Frustrated. -
I upgraded my 3gs to 5.01 and now I get the message "iPhone may be damaged and cannot be activated for service." Whats going on? I can't activate my device. It is essentially bricked at this point
Same issue c'mon apple.
-
Installed itunes 11 and now I get the following message 'The itunes library cannot be saved. An unknown error has occured (-50). How do I fix this problem?
Same problem here since latest update. As usual poor support from Apple with no answer or fix for this bug.
-
I own an iPhone 4S and have installed ios8. Subsequently none of my apps will work. How do I uninstall and go back to the previous operating system?
Good luck at the Genius bar.
I have figured out that if I do a hard restart of the phone the apps will work for a time, but then they begin to all freeze up again after a short time.
This may be a problem of not enough free storage. Have you checked the storage used by your apps?
Go to Settings > General > Usage -
I have got the new iPhone 5 and the iOS inside is suppose to have the facebook integration, i have upgraded to the latest version, now i get the facebook option in my notification centre, but i thougth i was going to get all the notifictaion , but sadly i have to log on to fb application to get all my notification updates , nothing is notifyied to me , is there a way to make this happen ??, if yes please help me out , i have tried all the options but doesnt seem to work im afraid ..
Good.
Three things come to mind:
1. I think you're implying when you travel away from your home to a more populated area, the cellular coverage improves and your iPhone works well. Is that right?
2. Do you have a case or some other obstruction over or near your iPhone's antenna? Have you tried moving or removing any possible obstructions near the antenna?
3. AT&T has a (free) app in the App Store called "Mark the Spot". You can use this app to report voice and/or data issues to AT&T, as well as keep up on progress they may be making in improving coverage in your area. Your trouble reports are geotagged (if you wish). -
Hello,
I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
thanks,Hello:
You will need to delete the keyboard from the other Mac. Simply disconnecting it leaves it still paired with the first Mac.
Barry -
I tried installing the new Itunes update and now I get the error message r6034 and now itunes is off my system? How do I get Itunes back?
i get a message saying error 7 (windows error 127)
Maybe you are looking for
-
Hi all, I have a 32Gb iPod Touch. My library makes it necessary to only load music that can fill the iPod, as I have more music that that. I attempted to delete my iPod library, which seemed to work initially. BUT, not all the music was deleted - 4 a
-
Film Strip does not match Edit slide
Hi The filmstrip does not match the slide I am editing. I am on 8.0.1.242 I did NOT delete the Elearning resource files at update (as per update instructions - which of course no one actually reads :-) ) but have done so since. I have saved and reop
-
Firefox crashes with error message: "Plugin Container for Firefox has stopped working"
When I open Firefox it seems to be working fine for one minute, then everything freezes and I receive the following error message: "Plugin Container for Firefox has stopped working --> Check online for a solution and close the program --> Close the P
-
Exporting from compressor to FCPX
Is there a way to export from Compressor directly to FCPX? I am trying to figure out how to best use my nMP. At the moment I am playing with the best way to import 4K mpeg-4 video from my gopro camera. russ
-
Access Point Secured Registration to WLC
Hello Which option on WLC ensure that any AP registering to WLC should be first authenticated with a password and then register to a WLC cheers CP