Able to connect keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
Hello,
I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
thanks,
Hello:
You will need to delete the keyboard from the other Mac. Simply disconnecting it leaves it still paired with the first Mac.
Barry
Similar Messages
-
My iPod classic wont connect to the computer. The light comes on but it doesn't even come up with 'connected' screen on the ipod. Have tried different computers, usb cables and ports, as well as restarting computer, updating itunes, and rebooting ipod. Still works in Logitech iPod player, however it has just wiped itself of all songs so at the moment I'm stuck with a useless iPod. Any suggestions please???
If you happen to have a USB docking cable that is new (or close to being new), try using that one. If the cause is the dock connector on the iPod becoming worn, if you try it with a cable that is not worn, it's possible that it may connect for data.
I believe the dock connector is internally part of the logic board, so it may not be economical to have a repair shop (including Apple Store Genius Bar) do the repair. You'll need to ask for pricing.
If you are good at such things, this web site has DIY repair guides
http://www.ifixit.com/Device/iPod_Original
If it's the most recent iPod classic, it appears to be quite difficult to pry open. I have an older 4th gen (and 3rd gen) "classic" iPod, and those are fairly eash to pry open, using the plastic tools. -
My daughter disconnected her iPod nano from the lead before ejecting the device. It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?
Restoring the iPod will do nothing to his iPhone.
When you restore it wipes the iPod clean no matter what computer you use.
The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766 -
Only receiving notifications to my iPhone but not to my iPad. Pretty sure they are both set up the same. Any suggestions welcome.
Open the Settings app on teh iPad, go to Notifications and check to see what you have set up.
Make sure Do Not Disturb isn't set to On. -
Acrobat Pro for Mac won't start, even after restarting the machine. Any suggestions?
Hi Patrick,
Can you please mention the version of Adobe Acrobat that you are using and on what OS version. Also mention whether this problem has started recently and was running fine earlier or is it a fresh install and has never worked for you.
Have you tried uninstalling and reinstalling the product after you started facing this issue.
-Shashi -
I want to make groups/ i made 1 group of 1/I went back & I had that group but couldnt make more/ I saw was page that hadnt been pinned yet as group/all other tab were shown on the right sid/I tried to pin the page that was shown in the tab group/then the one group(of 1) no longer showed up/Now I have a blank box with all the icons on the far right side.
Wow!
I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
If nothing else this totally highlights how complicated BT have managed to make their packages.
A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth. -
Anybody have any work arounds to get iphoto working again?
Here are some more details.
I upgraded from 10.6.8 to Mavericks.
I have iphoto version 9.2.3
Any suggestions would be very much appreciated. Thanks! -
Down loading a second copy after erasing the first one
what do i do when i accidently delete my copy from itunes store from my computer?
Hi Florian,
Stefan Cameraon has some very good posts on this. You can get a fair bit of idea from those posts.
http://forms.stefcameron.com/category/data-binding/page/4/
http://forms.stefcameron.com/category/data-binding/page/5/
Thanks,
Bibhu. -
as described above
In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie -
I have a webpage where I embeded more than 2 quicktime players. Only one player need to play at a time. When second player is played the first one should stop. I am using simple EMBED tags to embed the player.
I have a webpage where I embeded more than 2 quicktime players. Only one player need to play at a time. When second player is played the first one should stop. I am using simple EMBED tags to embed the player.
-
I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?
Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!
-
We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad. Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. Now we have two identical iPads looking like mine. Everything on her ipad seems gone and replaced with mine, all her recent holiday photos, emails, settings, etc etc seem gone.
I'm toast!
Help!!
LJHow to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
Cheers, Tom -
I purchased a yoga video with multiple chapters and only the first one loaded. It says I can't download another chapter for 90 days. How do I get all chapters to download?
Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
http://support.apple.com/kb/ht4627 -
Do I need a different apple ID for each device I have? I have two iPads and an iPod but I can only make purchases with the first one I purchased. It tells me the security questions are wrong but I know they are not because I wrote them down. I have also reset them and my password once. Please help if you can
You can not login into iTunes or the App Store using VPP credentials. You must purchase all apps/book/etc. from the VPP website. Then you can redeem the codes thru itunes/app store or import the codes thru apple configurator. Here is the url for the VPP website: https://volume.itunes.apple.com/WebObjects/MZFinance.woa/wa/login?cc=us
(It will not affect any of the apps you already have but the id can only be used for VPP.)
Cheers,
Alec -
Where can I see the downloads LIST when downloading podcasts,
like in the older version of iTunes? I find it frustrating that I see only one
download at a time now ! Any suggestions please?Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo
Maybe you are looking for
-
How can I show a PDF in a browser when it has XFDF data?
I need to show a PDF file with data, this data is a XFDF file. So the process works in my machine I open the XFDF and automatically the PDF appears with a data. The problem is when I make this process in a web environment, the HTML page does not show
-
Customer purchase order date allow 01.01.0511 in sales order ??
Hello All, In sales order,Customer purchase order date (filed name BSTDK) 01.01.0511 was maintained. the date format 01.01.0511 will allowing in this field in SAP in teh slaes order. or this is typo error.?? VBKD-BSTDK is having DATS data type.
-
Error in creating time dimension
Hi, I created a simple time dimension with two levels: year and month, and each level has one element that serves as chronological key. This is the error I got when checking global consistency: "The physical table 'my time table' , which is part of a
-
ALV Report to check upto current fiscal year
Hi All, I am running a reoprt. its output is in this way. Division Fiscal year Net Price. Chemical 2006 3456456 2007
-
How can I upgrade from MAC OS 10.4.11 TO LION
How can I upgrade from MAC OS 10.4.11 to Lion? My processor is only Intel Core Duo.