HT204387 I'm having a problem with my iphone5 connecting to the Nike Fuel Band via bluetooth, any quick fixes out there?
Hello
I cannot connect my new iphone5 to my Nike Fuel Band ( purchased at the Apple store, so I'm hoping it connects with one of their devices). Does anyone know if there is a fix? I have Bluetooth enabled on the phone. It's just not discovering the other Bluetooth enabled device. I've tried pairing with another portable Bluetooth speaker as well, and that was also not discovered. Of all products, I would have thought Apple had this part down already. A little frustrating.
Thank you,
L
Check the Ethernet connection to the AirPort Express. Make sure that the Ethernet connection from the Comcast modem is connected to the WAN port on the back of the AirPort Express. The WAN port is the one with the circle of dots shown over the port.
It sounds like you are connected to the Ethernet LAN port.
Similar Messages
-
Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki LapanThank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!! -
Time Machine - Problem with establishing a connection to the server
Using LionMac OS X Version 10.7 and when attempting to setup Time Machine to make backupto my ReadyNas Duo, the setup fails and I receive the following message(translated from Danish):
“There wasa problem with establishing a connection to the server ”SERVERNAME”.
The versionof the server that you attempt to establish connection to, is not supported.Contact the system administrator to solve the problem.”
Any ideasfor a solution?Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472 -
OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?
I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu. -
Having a problem with itunes update. Download wants to update to a driver (k:) which my computer doesn't have. As a result the download does not go through.
Try the following user tip:
"Invalid drive X:\" install errors -
Does the IPod Nano sink with the nike fuel band
Does the IPod Nano sink with the nike fule band? I am getting the IPod nano for christmass and I was wondering if that is compatable with the fuel band? I have seen my firend sink his with his IPhone and was wondering if I could do the same?
http://www.apple.com/ipod/nike/
-
Hi Guys,
Having problem with emoji, I have the character palette shortcut on my dock which I found through article from Cult of the Mac. I click on the emoticon and drag it to my email or whatever and get a blue box - no emoji. I tried the keyboard shortcut - doesn't work. I tried the drop down the menu in edit - doesn't work either. I am running Lion and want to upgrade to Mountain Lion. Want to fix this before I upgrade or should I just upgrade and hope for the best? Been all over the net looking for solution.
Thanks for your help,
blueheron11Pages does not support the Apple font used for color emoji, so that behavior is normal.
With what app are you reading the yahoo mail? There is really no guarantee than any other email service will show the special Apple font involved.
You should have no problem putting emoji directly into Mail or Text edit via drag drop from the Character Viewer as shown below.
You should also be able to upload graphics here easily by clicking on the camera icon. My email is tom at bluesky dot org. -
Have had Wireless Home Phone connect device refreshed and updated three times since I purchased it in September 2014. Last tech I worked with on it initialized an NRB to check the network. I checked the location of the tower, which is less than one mile up the hill with clear line of site. The device always has two antennas on it. The device is great when it does work, but most of the time it rings three times and then jumps to an automated message saying the person I am calling is not available. I've actually gone up there several times to try an fix the device, but always end up calling a Verizon tech who has me unplug it, pull the battery, and they do some network stuff and then we turn it back on and it works. After the last time on 10/02/14, I called it and got the message. I drove up there, 100 miles one way, and called it while standing in the room. Got the same message. I picked up the phone, heard a dial tone and dialed my phone and it range through. I hung that phone connected to the device and call it using my cell phone. It rang through. I went home and tried to call it the next day. Again it did not ring through and I got the message after three rings. I call another phone at the facility and had them call me on my mom's phone and it is fixed it again. The fix last for a day or two and then it's broken again, like it is today. If it's a network problem then it must be fairly close to the area because no matter what we do it fails again. So much for the 99.98% reliable. This thing is a piece of junk!
I purchased this device and put it on my plan so that my mother who we placed in a home at 96 years old would have a phone connection that she could use and wouldn't flip her out. My family and her family has not been able to faithfully connect with her at this critical time in her life. I am giving Verizon 10 more days to figure this out and then I am going to ask for a total refund not to mention how much time and travel I have put into this piece of junk. Either the home connect transceiver is broken or the network is broken. Why should I pay close to $70 for a service that has not worked more than several days out of 35 days? Also I have spent close to three hours on the phone with decent technical people, but it's my time. I should send Verizon a bill for every time I have gone up there to fix this device as well.
What perplexes me is that a regular cell phone would have sufficed, but because Verizon has to have a data connection that is not available on a regular phone and it was going to cost me $30/month, I decided to go with the home connect. Seemed like a nice solution for an older person who would have a hard time using a cell phone and keeping it charged. Plus after all the fees for getting it connected, it only cost $20/month. That would be a pretty good thing, IF IT WORKED....... The other thing that irks me is, why do I have to pay for a data connection when the cell phone Verizon originally provided can't even access the network. What ever happened to adding a phone line for $10 bucks\ month? All I wanted was a simple phone. She would not be able to use anything more complex and all she needs is a phone line period.
I have no problem paying for something that works and does what it should, but this is ridiculousness. The MTF on this device is somewhere around 1 to 2 days. Out of 365 days that's about a 96.5% failure rate....... Want my advice? Get ride of this device. It sucks and it's bad marketing.jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
I'm having a problem with my GPS connection plz. ...
i have a problem with my new nokia 5800 xpress music. my problem is when i baught the phone the GPS is banned in my country (EGYPT) but now it is permissible to use it in my country so i updated my nokia 5800 software withe the nokia software updater to the new firmware version (21.0.025) and i have the same problem which is i can't connect to GPS (the connection indicator is always red ) i can't even locate my postion on the map.
please help me
thnx alot
Solved!
Go to Solution.Hi a_youssef
Unfortunately it is not as simple as a user firmware update and you might like to look at this post concerning this issue:/discussions/board/message?board.id=navigation&message.id=10829#M10829
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
I am having more problems with 10 for Mac than the old one. Al ot.
All sorts of problems. It gets stuck. They have actually appologized the first time I used it and I had to turn off computer. The latest was I couldn't upload a file in an online email. I didn't have problems with the old one which was quite old.
All sorts of problems. It gets stuck. They have actually appologized the first time I used it and I had to turn off computer. The latest was I couldn't upload a file in an online email. I didn't have problems with the old one which was quite old.
-
Problems with Deskjet 3050A connecting to the computer (Mac)
Hi,
I have recently moved to university and have bought my new printer with me (which I had set up at home). But I am having real problems connecting it to the computer. It doesn't accept the wireless connection because it is secure as it is from the university. The USB connection also doesn't seem to work as it always says that the printer is not connected. I have tried installing the software again and it recognises the printer from the USB, but there is no difference when I try to print something.
Please help as it's essential for my studies!
ThanksWelcome to the forums. You need to:
1. Bind your desktop machines to your Open Directory master
2. Create groups and user accounts in WorkGroup Manager which allow your users to log into those computers
You will find the User Admin documents here useful:
http://www.apple.com/server/documentation/
hth,
b. -
Hello i have problem with my phone connect to the pc
as i read the tutorial it says that once i plug in my usb cable i would see a notification on my phone on usb debugging or option to choose. But it never pop out for my device. it straight goes to charging my phone. Is there anybody could help me in this?
I've had similar problems with several types of phone, and it only seems to be when connected to a vista pc, my solution was to go back to XP, now have no such troubles. Good luck
-
Problems with synch and connection to the store.
When i connect my iPhone 3Gs with my Windows PC 64 Bit and try to synch the progress bar stops at a certain point and nothing happens (even after an hour).The second problems occurs when i try to connect to the iTunes Store. Either way nothing happens ( at the progress bar) or an error appears and says check your internet connection or try again later. I checked my internet connection and tried it about 10 times. I deinstalled iTunes and re-installed it repaired it and restarded the pc, made all updates and it's still not working. Please Help!
same problem here. when am trying to access store i get the error "itunes has stopped working"
-
Trying to pair my phone with my pc via bluetooth , had internet connection error .my iphone asked to forget about my pc and i clicked yes thinking i can redo the connection later but ever since, my iphone as refused to discover my pc .i have tried every thing i know but to no avail . can you pls help
thanksEdge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
When trying to send messages in linkedin, firefox takes me back to the log in screen without sending the message. On the error console it shows the error; error in parsing value for "background" and error in parsing value for "filter". What is causing this?
Pages does not support the Apple font used for color emoji, so that behavior is normal.
With what app are you reading the yahoo mail? There is really no guarantee than any other email service will show the special Apple font involved.
You should have no problem putting emoji directly into Mail or Text edit via drag drop from the Character Viewer as shown below.
You should also be able to upload graphics here easily by clicking on the camera icon. My email is tom at bluesky dot org.
Maybe you are looking for
-
How to delete old invitees from ical
When creating a new appointment in ical, the invitee list autopopulates with old addresses - some of which ar every similar to new, and thus confuse... How does one get rid of these? I have been to mail, window, previous recipients...and deleted...b
-
I was having a compatability issue with another entities website and platform. I was asked to upload my informaiton with Mozilla Firefox. I used this digital platform before employing Internet Explorer to complete my master's program. I am able to in
-
Using a time capsule to extend a fios router?
I know this topic has been covered many times, but I seem to have trouble finding my answer to my exact questions. I have verizon fios wireless router that they provided with the service. We have a large house with the fios router at one end. At the
-
Dear all, after changing all components of our NW04 Java system to https, I was looking for a possibility to change the HTTP access to the IGS to HTTPS. I found SAP note 965076 stating that you can activate https if you have an IGS version 7.00. Unfo
-
Save-for-web feature identical in AI and PSD?
I work in both Illustrator and Photoshop for web design. In creating web safe graphics, is there a difference between the two apps when exporting web safe graphics?