HT204387 When trying to add text notifications on my iphone 5 Through my Ford sync all pages tell me to open settings, click on the sync when it is pair with the car and there should be a Turn on Notifications slide but there is not. Please help.

I heard that Ford Sync now allows the user to have text message notifications appear on the dash board. I have looked up how to do so, the instructions say on our phone click on settings-Bluetooth-when paired with the sync click on sync and there should be a slide option that says turn notifications on. I am using an Iphone 5 with the latest operating system and I do not have a Turn notifications on stting in my bluetooth. Please help

Resetting Network Settings means that the saved password that enabled your iPhone to connect to your WiFi router was erased. You are now reentering that password. Most likely you are entering the password incorrectly or are entering an old password or the wrong password.
Check that the password that you are using is absolutely, positively, the correct and current password for your router. Make sure that you are not confused l with 1, O with 0, etc.

Similar Messages

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

Image turns red when trying to add text?

I'm using CS5 64 bit on a Win7 64-bit machine, with 8GB RAM.
I have been creating images, then adding text to them, with no problem. All of a sudden, something is going wrong.
I have created an image out of a white background with green text. I saved it as a .psd
Later, I opened it in CS5, and clicked the Text tool. I put the cursor on the image, and the whole image box turned red.
All the options under Layer (like New or Duplicate) are grayed out.
The Layers box shows just one layer, named Index. Right clicking on that shows all grayed out options.
I also tried to add text to a previously saved .jpg with the same result.
If I make a new image, I can add text correctly.
And I can also add text to other .jpgs I've made previously.
So apparently it is something to do with the way these particular files were saved or something?
I tried resetting the Text tool but that did no good.
What am I doing wrong? What makes these images different?
I tried to upload the .psd image in question, but I got an error message saying that "the content type of this image is not allowed".
Thanks!

If you want to post a large image or one of a format that isn't supported by direct attachment here, here's a suggestion:
Go to YouSendIt.com.
Create a free account.
Upload and send the image to yourself.
When you get the URL, post it here.
-Noel

Using imovie error message when trying to add text to my project

When I try to create a project in imovie everything is working fine. When I try to add text to my project I click on the T to add text and the program shuts down.
Do I need to re- install something again?? any suggestions??

What is your operating system? Reader version?

Bad parameter when trying to add text

When I try to add text to my document, it says bad parameter and I can't add text. How do fix this?

Hi mrssarahswritingclass,
You need to make sure that you have permission to make changes to the document.
How to check the permission. Open the pdf document in Adobe Reader/Acrobat.
Click on File --> Properties. Once the properties windows pops up, click on security tab. Under security please check Restrictions Summary:
Regards,
Ajlan Huda.

When trying to add a song to a playlist I don't see all playlists listed on my screen.

I am trying to add a song to one of my playlists. The name of it starts with an S and playlists with names that begin with A through P show on my screen only. When I click on add to playlist I only get A through P.

And no one could answer this question????? I am struggling for two hours with this problem and can't solve it.
I have several playlist folders. Here they are
Then when I try to organize and add some files from the library and I drag a song, I don't see all the playlists folders at the right side on my itunes screen. Here is the pic.
Do I have to change something in the settings that I am not aware of for other playlists to display? How do I solve this problem?

I have updated my iPhone and I was able to text my friend but now that I have updated my iPhone it shows that it's an iMessage and it won't go through, I know I'm supposed to turn on my Internet but I'm confused please help?

I was able to text my friend to her number but now that I have updated my iPhone it shows that it's an iMessage when I text her to the same number, I know that with iMessages you have to turn on your Internet but I'm texting her to her same number so it shouldn't be an iMessage. Can someone please help?

Hi rennekamp3,
If your machine currentlty won't boot past a grey Apple screen, you may find the following article helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Note: If you get to the portion on starting from the Install Disks or performing an Archive/Erase & Install, you'll notice this article has not yet been updated for the more recent operating systems. In that case, you may want to refer to the following article:
OS X: About OS X Recovery
http://support.apple.com/kb/ht4718
Regards,
- Brenden

PSCS6 crashes when trying to add text

I am trying to create a picture made up of text that represents the person inthe picture.
I go throught he stages of getting the shadows and the midtones layers together then when I add a text layer once I put in the text the program crashes and becomes unresponsive.
I tried to reduce the amount of text but then only half the text is justified correctly and the bottom half looks as if it is tryong to wrap around an invisible box.
Has anyone else had this problem?
Can the amount of text be set so that I can put a large amount of text to make a picture?

Hi mrssarahswritingclass,
You need to make sure that you have permission to make changes to the document.
How to check the permission. Open the pdf document in Adobe Reader/Acrobat.
Click on File --> Properties. Once the properties windows pops up, click on security tab. Under security please check Restrictions Summary:
Regards,
Ajlan Huda.

On my apple tv it says "to access iTunes library, turn on home sharing. I've done this and my home sharing is turned on my computer, but there are no computers being listed under the computer option on my apple tv? How do I connect them?

Does anyone know how to get homesharing working right? I have it on my computer and it shows that it is sharing, but on my apple tv it says that it is not working when I look under the computer tabs...?

You mention doing all of the above, what would that be exactly?
The article linked above is for airplay, have you checked home sharing tips?
http://support.apple.com/kb/ts2972

My ipod touch screen is cracked from the bottom left corner to the middle button, my button has recently stopped working and i was wondering if this has caused or has another problem occurred, please help me?!ha

any help or suggestions? someone technical??

Doesn't matter if the crack is causing the button to stop working not, that won't be covered under warranty.

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

This is quite an open suggestion, but here are some ideas which might get you started. There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary. I have only worked with Sony XDCAM which seems pretty good to me. File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter. The Sony XDCAM EX3 can produce results well up to broadcast quality.
As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card. Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7. It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor. But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to).
This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
Hope this helps a bit.
Jonathan

Brand new Macbook Pro not pairing with Apple Keyboard and mouse!

Hi all, I have a brand new Macbook Pro and an older wireless Apple Keyboard and Mouse (that were being previously used with my imac G5).
Now I want to use these for this macbook. I am finding that they are being recognised but not pairing up?
Do you need to stop the previous pairing with the imac before they will pair with the Macbook?
Or do I need to update specific software? (I would have thought it has all the necessary updates already installed).
I am running Snow leopard.
I have brand new batteries in the keyboard and mouse.
I really appreciate any helpful advice. Sorry if the answer is obvious!
Thanks

Hi there, i had a problem pairing an Apple wireless keyboard with my MacBook pro but managed to solve it.
The default passkey option in Bluetooth setup assistant is 'automatic' which will (if the MacBook can 'see' the keyboard in the first instance) then say something like 'your device may prompt you to enter the following passcode 1234 5678'
Obviously the keyboard doesn't provide any feedback - I went ahead and typed the number and hit the return key a number of times - the MacBook then displayed a 'pairing failed - you may have entered the incorrect passkey' message.
What i was doing wrong was keying only numbers - when i keyed 1234[SPACE]5678 + RETURN pairing worked.
I had thought the 'gap' in the passcode was to make it easier to read, not that it implied a space in the passcode.
Hope that helps.
Simon

My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

See this article:
http://support.apple.com/kb/ht3964
Find the section that applies to your computer, and follow the instructions.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Error when trying to add transitions and titles

I'm getting an error message on iMovie HD 5 when trying to add a title or transition that says, "error in system operation (-4960)" can anyone help me out here?
thanks!

Hi minD:
This error usually indicates an OS problem, rather than iMovie problem.
Prevent Mac Disasters
Eight Simple Steps You Can Take Now to Keep Your Mac from Falling Apart
http://www.macworld.com/2005/01/features/preventmacdisasters/index.php
(Article is in 3 parts, don't miss parts 2 and 3)
Sue
(Thanks to Lennart Thelander for the copy & paste)

I am trying to add text to the I photo book inside the which indicate the boundaries but a red triangle has appeared. for indicate the boundaries for such text, however there is a small red triangle appearing to say that I have too much text.

I am trying to add text to an I photo book project. I have entered the text inside the blue lines which indicate the boundaries but have got a red triangle showing I have exceeded the text. Any ideas please?

Check the font size, if it's just a little too close to the top of the box, it will reject it.

HT204387 When trying to add text notifications on my iphone 5 Through my Ford sync all pages tell me to open settings, click on the sync when it is pair with the car and there should be a Turn on Notifications slide but there is not. Please help.

Similar Messages

Maybe you are looking for