HT204400 I get no audio from this device.  All my HDMI ports are in use with the cable box, DVR and receiver .  My digital optical cable is also in use to the receiver.  Is there a solution?

I cannot get audio using this device all my HDMI ports are in use as well as my digital optical cable.  Any solutions?

How exactly is the ATV connected if all HDMI ports are in use? 
If connected directly to the TV, then audio is being sent to the TV speakers, not the receiver.

Similar Messages

  • PP CS5, importing mp4's I only get 1 audio channel instead of all 4...?

    PC,
    PP CS5, importing mp4's I only get 1 audio channel instead of all 4...? I put the clips in Vegas & all 4 channels appear. What can I do? Going insane!!!
    Steve

    It's pretty simple... when you know how
    Get ffmbc - FFMedia Broadcast .   This is a customized build of FFmpeg that is more geared toward   broadcast formats and applications. The latest "official" release (0.5)   will work.
    Open the archive and find the "ffmbc.exe" file in  the "bin" folder. Drop it into the folder with the MP4s--or if you know  how to set up a custom path, you could do that too.
    Create a new  text file called something like "mp42mxf-4mono.bat" making sure that you can  see file extensions; you need to have the .BAT extension. Make this file  in the same folder as the MP4s and FFmbc.
    Paste the following into the batch file:@ECHO OFF
    for %%a in (*.mp4) do ffmbc -i "%%a" -vcodec copy -acodec pcm_s16le -f mxf -y "%%~na".mxf -acodec pcm_s16le -newaudio -acodec pcm_s16le -newaudio -acodec pcm_s16le -newaudio
    Save it--again making sure it has a .BAT  extension--and then double-click it to run it. It will rewrap all of the  MP4s as MXF files that will import into Premiere. It will also retain the original four mono tracks as four mono tracks in the destination MXF.
    That's all there is to it. Save that script, and you can recycle it whenever you get a batch of these types of problematic files in. Note that it's a completely lossless rewrapping, and should only take a few moments (or minutes, if you have a lot of footage, I suppose). Let me know how that goes.

  • HT4528 I can't seem to sync my iPhone with iTunes.  I keep getting this message:  iTunes could not connect to the iPhone because an error occurred while reading from this device.  What can I do?

    I can't seem to sync my iPhone to my computer; I keep getting this message:  "iTunes could not connect to the iPhone because an error occurred while reading from this device."  I get the same message with my iPad, even though they all share the same account.  What can I do?

    This could be caused by a USB connection issue. Make sure the iPhone is directly connected to the Mac using the USB cable it came with. Also, try disconnecting all other USB devices.
    If you haven't already try resetting the iPhone by holding the Home and Sleep/Wake buttons until you see an Apple logo as described here:http://docs.info.apple.com/article.html?artnum=305743

  • I've been running Windows XP over bootcamp on an iMac for a few years now and I can't seem to get any sound from external devices into the machine. Any ideas?

    I've been running Windows XP over Bootcamp on iMac for a few years and I can't seem to get any sound from external devices into the machine. Any ideas?

    O.K. fgonoz98
    I would do 1 thing at a time:"now the micropohone is not working in facetime"
    Here is what you can check to get your mike working in facetime:
    1. Hold down option while you click on the speaker next to time a. date,
    under input Device see if your mic is marked. If not: ✔️
    2. Click the apple top left/System Prefs./click on the Sound speaker:
    under Input highlight microphone.
    3. When you have factime on go to video above scroll and see if your mic is marked ✔️
    If that does not get it to work there is more you can check:
    (Utilities/Audio, midi setup)
    For any other audio device you do this for input and output.
    If you get stock post back

  • I don hear any audio from my device ..its hp pavilon dv6 i7

    i don hear audio from my device and its hp pavilon dv6 i7 product no: WY913EA#ACB

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50642.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How do I get analog audio from my apple TV 2nd generation?

    I am trying to find a solution to getting an analog (RCA stereo) audio output from my 2nd gen AppleTV to my Onkyo receiver so that I can listen to audio from it on my "B" (outdoor zone 2) speakers. Unfortunately the receiver only accepts anaLog input for the zone 2 speakers. The 2nd generation AppleTV only outputs digital audio. Kind of a pickle. The only solution I've found so far is a pricey digital to analog converter that costs more than the ATV! I have no idea if this will even work, or still output sound through the HDMI cable at the same time.
    Anyone out there have any advice or suggestions? Any and all help would be most appreciated as Apple tech support can be very unhelpful without paying for the support plan.
    Thanks,
    Brian

    Thanks so much for the quick responses! I've just ordered a DAC from B&H made by Gefen that should do the job. I opted not to get the one that decodes Dolby Digital as I only intend to listen to music on my Zone 2 speakers that are located outside on the back porch. However they do make one that would be great for those needing DD decoding, and I am told they corrected the popping sound when changes sources or channels.
    I could have bought a much more expensive receiver, but I feel that a have a stellar system that is up to date with almost all of the new technology. This will all change in 5 years I am sure! At least for now I am all hooked up with HDMI and am receiving the best in picture and sound, with the exception of my "B" speakers being analog. No biggie.
    I'm pretty happy with my Apple TV2 with except for the occasional wi-fi glitch and the lack of Pandora.
    Thanks again for the replies!

  • "Cannot send email from this device"?

    I recently purchased the Easy Release App from the ITunes store and when I try to email the release to my email address it says "Cannot send email from this device". Is it the app that is preventing the sending or is it something to do with the iPod? I've tried sending an email from the iPod to see and it is sent fine from the iPod but the app still won't send from the iPod.
    Has this ever happened to someone else? Do I have to change settings on my iPod?
    I have the IPod 4th generation if that helps

    I had the same problem. You have to go into Settings in your ipod touch, scroll down and find "mail, contacts, calendars." Set up your email in there. It will give you a list I.e. yahoo, hotmail, gmail. After you've dont that you'll be able to sent the model release.

  • Adobe Bridge CC cannot obtain files from this device.

    I am getting this error message when I attempt to upload videos to my Mac from my Canon 7D:
    Adobe Bridge CC cannot obtain files from this device. Please be sure the device is properly plugged in and the battery is full charged.
    Battery is full charged and camera is connected properly. I have restarted the camera, Bridge, and the computer as well. I tried reinstalling Bridge and it allowed me to upload 3 of the video files. Then the error message came back. There were a few RAW images on the camera that I was able to upload, but when I tried the video again I got the error message. I read a post about renaming the folder that you are saving to as a fix. I tried that as well, but it did not work.
    Any help would be greatly appreciated! Thanks!
    -J

    This excerpt is from a long-gone post by author Bruce Fraser:
    Bruce Fraser - 4:17pm Jun 14, 04 PST (#5 of 21) Opening files directly from the camera is a bad idea for a variety of reasons*, and it most certainly isn't faster than using a FireWire or USB2 card reader. 
            • Drains the camera battery
            • Runs the risk of the software you're using to open the images writing to the card and destroying the format
            • Runs a small but significant risk of USB power frying the camera
    • runs the risk of wearing out the camera's connector,      
    • Slowest method known to mankind of getting images off a CF or SD card

  • I have an iPad 1 that is currently showing software updated at version 5.1.1.  Is it possible to update to iOS version 7 on this device?  My goal is to get Garage Band on this device and the app store is telling me I need iOS version 7.

    I have an iPad 1 that is currently showing software updated at version 5.1.1.  Is it possible to update to iOS version 7 on this device?  My goal is to get Garage Band on this device and the app store is telling me I need iOS version 7.

    Hi,
    If you really need to upgrade you can save a bit of money and get an older version than the ipad Air.
    First, you can sell your ipad 1 to places like gazelle.com, cashforyourmac.com, sellyour mac.com, or many others out there. The sites I listed give you cash. At this point gazelle.com is giving $70.00 for any ipad 1 in 'good' condition. And cashforyourmac will give you $25.00 over what gazelle.com or sellyourmac.com offers you. Shipping is free.
    Then, with that money, go the the Apple online certified refurbished store. As an example, a new 64gb Air costs $699.00. A refurbed 4th gen 64gb costs $529.00 and a 3rd gen 64gb costs $499.00. Personally, I'd skip the 3rd gen. So if you buy a 4th gen 64gb at $529.00 minus what you can get from a sale to above, you can get an ipad 4 64gb for just over $430.00, a savings of savings of about $270.00. (A new 32gb Air is $599.00, a 4th gen 32gb is $449.00, and a 3rd gen 32gb is not on the site right now.) Google it and check if you can get better offers anywhere else. But getting one from the Apple refurb store gives you an essentially new ipad and using the above sites, you're not locked in with a particular site which will give you a gift card and restrict you to their store/site.
    Each Apple refurbished ipad (any version) comes with a new front and back cover, a brand new battery, same return policy, and a full one year warranty with 90 days of phone support. Each comes in a white box like a new ipad with the wall charger and usb cable. The only difference is that it says in small print on the bottom of the box that it is Apple certified refurbished. Also, if you buy refurbs, be sure to check the store many times a day. They can come and go quickly, so when you see what you want, buy it right away. Shipping is free and pretty fast. (We bought two a year and a half ago and they have been great!)
    Hope this helps.

  • My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?

    My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?  A message from windows says: the device has malfunctioned.

    Try TS1363: iPod: Appears in Windows but not in iTunes.
    See also Corrupt iPod classic.
    tt2

  • How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

  • Adobe Bridge cs5 cannot obtain files from this device.

    I download photos to my computer using a Kingston downloading device.
    Since installing Mavericks the above message comes up and will not carry out the download.
    Is this a known problem with Mavericks and is there a remedy?
    I would say that using the same device my photos download perfectly on my MacBook Pro.
    Messages
    1. Adobe Bridge CS5.1 cannot obtain files from this device.
    Please ensure that the device is connected properly and that the battery is charged and try again.
    2.I also get a message telling me that the "disk was not ejected propery" which is not the case.

    Thanks Eric
    The MacBook Pro is not running Mavericks and sorry about the double post.
    I have actually solved the problem and the answer might be of use to others with the same problem.
    There is a firmware update that will correct the problem.
    It's at
    http://www.kingston.com/en/support/technical/products?model=fcr-hs3
    There is a small catch in  that the firmware update can only be done on a Windows machine but I have been told that once this is done it can be used with OSX9 .I have just done the download but  I haven't checked this out yet.

  • HT4101 When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome tis

    When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome this?

    You are probably seeing this message because the camera uses the same port to charge it. The iPad can not supply the power to charge devices from it's dock connector. Also if you use the SD card adapter you are not using up the camera's battery for transferring the photos.

  • "An error occured while reading from this device"

    "An error occured while reading from this device" is the message I get whenever I try to sync my iPad to iTunes.
    The only way I can sync is to do a restore and then put everything back on it.
    Can anybody help?

    Make sure you also unisntall
    Bonjour,
    Apple Mobile Device Service,
    Quicktime
    and there's a couple of others. there are Apple support articles, but I'm sorry I don't have the articles linked. Also ensure you reboot after all of the uninstalls and reboot you iPad as well. This all fixed my laptop, but as I said, my desktop PC is still acting funny.
    As your laptop seems older, and the MB link is suspected on a particular group of newer motherboards, so I doubt your laptop motherboard is the common link.
    You might want to double check that its USB2 ports.

  • I am getting repeatetly sms from this number.

    I am getting repeatetly sms from this number. No idea from where it comes. In the discussion I see that people are getting bills of unsent messages to this number!
    Please stop this immediately. SMS come during night and day, started yesterday night,  in  ab 12 h I have got 6 sms.
    Please, block this number so that I wont receive any sms and so that my phone will not send any to this number. In discussions I can see that sms have been sent without that the user of the phone has sent them.
    <Subject Edited by Host>

    Thanks, for the tip, googled it right after that
    FaceTime Registration Request
    The iPhone sends a Registration Request SMS silently to this UK number (as identified by the +44 country code): +44 7786 205094. AT&T customers have their own local number for FaceTime activations: 28818773. In Bell and Telus carrier bundles, version 7.2 the number is: 49988.
    FaceTime - The iPhone Wiki

Maybe you are looking for