HT2305 need to load new software ios 5 for my ipad and ipod

i need to know how to down load ios software on my ipad and on my ipod, as it doesnt show on both ov my devices how to update the device, in gnereal it normaly shows up date software on mine it doesnt pls help me as ive scan google and still not getting any joy....thanks

Update it from iTunes on a computer as described at the bottom of this article; devices running an iOS version prior to 5.0 can't be updated straight from the device. It will be updated to iOS 6.1.3 or 6.1.4 if supported by the device’s hardware.
(83227)

Similar Messages

I have a PowerPC G4, 1.5 Ghz, with 1.5 GB of ram. Currently running OSX 10.4.11. Can I upgrade to 10.5.8 (or higher)? Need to load new software and said that was the minumum requirement.

I have a PowerPC G4, 1.5 Ghz, with 1.5 GB of ram.
Currently running OSX 10.4.11.
Question: Can I upgrade to 10.5.8 (or higher)? Need to load new software and said that was the minumum requirement was 10.5.8
Thanks, WPC-2012

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
 Cheers, Tom

HT1766 I loaded the software fix for face time and it wiped out my contacts and photos. can I restore them?

I loaded the software fix for face time and in loading the new software I lost all of my other content (WITHOUT ANY WARNING). This included my contacts, photos, music. The music I can restore and losing the contacts is an inconvenience, but losing the photos is devastating.
Any ideas?

What software fix for FaceTime? What software did you apply?
Did you backup your iPhone before you updated it with whatever update you applied as described in HT1766? If so, did you backup to iCloud or iTunes? Either way your data should be restorable from that backup.

Morning, need to download the latest ios for my ipad...

Morning, need to download the latest ios for my ipad..

If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

When my 6 year old daughter plays the free games that I have downloaded for her IPAD and IPOD, I am now getting upgrade charges on these free games to my AMEX Card. WHy is this happening and how do I get my AMEX card off of the IPAD and IPOD?

When my 6 year old daughter plays the free games that I have downloaded for her IPAD and IPOD, I am now getting upgrade charges on these free games to my AMEX Card. Why is this happening and how do I get my AMEX card off of the IPAD and IPOD?

She is making in app purchases. Probably not knowing what that means to your monthly credit card bill. Use the Settings app to enable restrictions and turn on restrictions for iTunes, App Store and in app purchases, mabe some others too. The restrictions will be set with a passcode to prevent your daughter from changing them.
Settings > General > Restrictions

Need advice on new hard drive for Time Machine, and have Firewire questions

I have an Intel iMac 2.66GHz with 500GB internal drive. I am going to buy an OWC 1TB drive to use for Time Machine.
I also have an older 160GB external drive with Firewire 400. I'd like to continue using it for extra storage, and would like both the iMac's internal drive and the 160GB external drive to be backed up to the new drive.
OWC's 1TB drive is available with Firewire 400 & USB 2. For an additional $30, it will also have Firewire 800. If I get the Firewire 800 drive and daisy-chain the iMac > new 1TB drive > old 160GB drive, will the iMac to 1TB drive run at 800, or will the 160GB drive's limitation of Firewire 400 pull the speed of the whole connection down to 400? (If the latter is true, then it would be a waste of money to get Firewire 800.)
Also, will it make much difference whether I use Firewire 800 or 400 for a drive dedicated to Time Machine?
Finally, the 1TB drive with a 32MB cache costs $20 more than one with a 16MB cache. Is a 32MB cache worth the extra expense for using with Time Machine?
Thanks!
Message was edited by: Patrick Houlihan

Patrick Houlihan wrote:
If I get the Firewire 800 drive and daisy-chain the iMac > new 1TB drive > old 160GB drive, will the iMac to 1TB drive run at 800, or will the 160GB drive's limitation of Firewire 400 pull the speed of the whole connection down to 400? (If the latter is true, then it would be a waste of money to get Firewire 800.)
I believe it will operate the entire bus at the slowest speed, but can't say for sure.
Finally, the 1TB drive with a 32MB cache costs $20 more than one with a 16MB cache. Is a 32MB cache worth the extra expense for using with Time Machine?
I went with the cheaper, smaller cache OWC drives for my backups on the theory that if caches speed repeated access of the same data, and a backup is always a single-pass stream of non-repeating data, then with a backup the data that goes in the cache doesn't need to be fetched again and therefore the cache isn't much help for backups. I'd love to hear if that's true.
I didn't answer the one about FireWire 800 for Time Machine because my Time Machine backups are over the network to Time Capsule. However, having a faster Time Machine drive interface should be faster. FireWire 800 certainly speeds things up for non-Time Machine backup software like SuperDuper which I also use.

If I use my iPad to store my iTunes library, can I update my iPod through the iPad? Or must I keep iTunes on a PC to serve as a hub for updating iPad and iPod?

Just got an iPad. My plan was to store my iTunes library on iPad and update iPod through the iPad. Can I do that, or must i keep the library on a PC to serve as hub for all updating?

Home Sharing is only for PCs that are connected in the same network

HT1222 Why i cant get software's for my iphone and ipod?

I need help!!!!

Sure you can, just not ones that require a newer version of iOS.
Correct, you can't update beyond iOS 4.2.1.
Finding iOS Apps Compatible with Older Devices

Have you heard about the new iSmart Protection Plan for iPhones, iPads, and iPod Touch mobile devices.

Just wondered if you saw this announcement yesterday. May be worth looking into. More than 300 news services picked up the press release. There are
reportedly millions of consumers without any kind of extended warranty coverage. Well - this one was designed especially for you and is the best of breed on the market for ALL iPhone users! Check out what they are saying!
http://www.coolest-gadgets.com/20120216/apple-free-idevice-protection/#more-65639
Comment on coolest gadgets
http://www.prnewswire.com/news-releases/new-ismart-protection-revolutionizes-extended-warranty-programs-for-apple-mobile-devices-139429483.html
PRNetwire press release
http://finance.yahoo.com/news/ismart-protection-revolutionizes-extended-warranty-120000854.html
on Yahoo Finance
Their motto is "Think Repair, Not Rplacement. Think iSmart!"
Cheers - Vinny

Well. This is not caused by any app nor is it a software fault in general. But someone told me, that the owner could have let change the screen after the damage that caused the dent. Anyway, this problem exists. The question is how many units are affected and why this is. However. Cheers.

How do I transfer all my music, apps contacts etc for my iPad and iPhone to my new laptop from a desktop?

I can't update the software on my desktop because it's too old and no stores seem to have the "bridge" disc I need to upgrade my current system. So, I need to transfer my synch abilities for my iPad and iPhone from my desktop to my newer, more up-to-date laptop. What is the best way to do this? I have the apple base station also.

You will find these ueful:
How to use Migration Assistant:
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

HT1430 guys, I need help, im trying to the the new software IOS 7.0 and it requires 3.7 GB free space. im using the IPhone4 and it had 6.4 GB capacity. i've deleted so much and it still says I only have 1.4 GB, I dont understand where the 5GB are being us

guys, I need help, im trying to the the new software IOS 7.0 and it requires 3.7 GB free space. im using the IPhone4 and it has 6.4 GB capacity. i've deleted so much and it still says I only have 1.4 GB, I dont understand where the 5GB are being used.
has any one experienced that? I cancelled my icloud account coz i tot the 5GB where there. im so confused. please help.
Dee

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will cbe recognised... any ideas?

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will be recognised... any ideas?
I just found that I can't Sync my Iphone either and it gave the same error code.... it must be a ITunes problem.
Message was edited by: stephenfromwandi

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

Why won't google show images just text since loading new software

I just loaded new software for ipad but now google images just shows text
Any ideas

Hello Burgess944,
The following article provides troubleshooting steps that can help resolved most issues with apps on your iPad.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
Cheers,
Allen

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

HT2305 need to load new software ios 5 for my ipad and ipod

Similar Messages

Maybe you are looking for