HT2413 how to solve "no interface for wireshark in current configuration"

When I start up my wireshark on MacBook pro with the operating system Mac OS Mountain Lion, it shows like this and cannot capture. What shall I do to the configuration and where am I supposed to do it? It would be nice of you to help me solve this.
Message was edited by: ZodiacTJ

Set the permissions of the dumpcap executable to something like root:wheel rwsr--r-- (NOT rwsr-xr-x), and add an ACL entry for each user who needs to run Wireshark. For example, to enable user "foo" to capture packets,
sudo chmod +a "foo allow execute" $(which dumpcap)

Similar Messages

  • How to create WEBGUI interface for own-created program

    Hi experts!
    Could you please suggest me:
    Some of our end-users have to work with WEBGUI interface. In T-code VL02N we have our userexit SAPLZSDEXIT (Screen 0110). And in WEBGUI we don't see this tab in VL02N. I think I have to generate web-interface for this screen. But how I can make it? This screen was developed by our ABAP-ers in se51 t-code.

    Solved

  • Ios 6 orientation doesn't work and boot time increases. How to solve these issues for dummy? I don't understand code and strings suggested by others.

    I just upgraded from ios 5 to ios 6 on my ipad2. Now orientation doesn't work properly. Boot time increase, it takes longer time to boot. Is there any configuration to solve these issues? I can't understand the explanation with code and strings found on google to solve the orientation issue. Any easy configuration for dummy ?

    It supports well for ios 5. I couldn't remember (5.x.x) exactly but I always keeps update for ios5 and the abnormality starts when I upgraded to ios 6.

  • How to use multiple Interfaces for the same BS?

    Hi @ ,
    Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
    I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
    Any help will be highly rewarded
    Regards

    Hi-
    Yes it is possible you can use multimapping for mapping the interfaces.
    To know more about multimapping see
    http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
    Some more helpful links
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

  • Need information on how to integrate bank interfaces for 820,824 transaction using B2B add on

    HI All,
    Can anyone share some knowledge on how to integrate 820,824 transactions using PI B2B add on .
    I have downloaded B2B mapping kit and B2B toolkit into IR and uploaded SCA files into PI server.
    But I can not see any mappings provided for 820/824 by SAP in B2B mapping kit.
    Please share your comments.
    Regards,
    Dinesh

    Hi Dimitri,
    I am looking for 820,824 for ANSIX12 format.
    And i guess SAP has provided example mappings only for 810,830 and 850.
    I am unable to see the example mappings provided by sap for 820/824 in B2B mapping toolkit.
    Is there any way or place to find the example mappings for these formats?
    Regards,
    DInesh Male

  • How to create an interface for extractors from CRM to BI/BW

    Hi Experts,
                    My aim is to bring in data from CRM source to BI/BW target so for that we have found few extractors in CRM side which we need to use in BI. I would like to know how i can achieve this. I knw we can use web services for this, but i want to knw the procedure involved in doing this. I have mentioned few extractors which has to come from CRM system to BI/BW target system. Current we dont have these extractors in our BI/BW system. Also we dont have the connection to that particular CRM source. Please advice what has to be done for the above.
    Extractors
    1. 0CRM_FM_BPO
    2. 0CRM_FM_FND
    3. 0CRM_FM_FND_ATTR
    4. 0CRM_FM_FND_EXPENSE_TYPE_TEXT
    Thanks in advance
    Shiva

    Hi,
    First we need to create a RFC Connection between CRM To BW system. BASIS persons will create this connection.
    [Connection between Source Systems and BW|http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm]
    1.After that we can need to activate data sources in RSA5 in CRM system,
    2.post processing in RSA6 in CRM.
    3.Replicate source system in  BW system.
    those data sources will come to BW.
    Do Business content activation in BW. After you can create Info packages and load data.
    Regards,
    Madhu

  • How to solve sample scenario for zeport

    i am working with client veedol lubricants...
    i would like to develop a actual vs target sales for month and year.
    actual sales values are coming from system.
    actual core materials for month and year coming from system.
    target sales values are entered manually..
    target core materials for month and year entered manually..
    so in this case how can i approach...
    whether i required to create any ztable for target sales  data..
    if create table  is it required to create table maintenance genaratore ..
    how those values are stored in sm30 transaction..
    how can i pick sm30 values to my zreport..

    U can create ZTable for target..
    After creating ZTable, u need to create table maintenance in SM30.
    To create Table maintenance genetrator,
    Go to Utilities->Table maintenance generator
    Give the function group
    Authorization group .
    Maintenance type that is 1 . step or 2 . step .
    Click on generate screen in the application tool bar .
    Your screens will be generated .
    Click on create Select the required option , save and come back
    Then Create.Save. Now Table maintenance is created. which is only used to maintain data.
    U need to fetch data from ZTable only.
    Regards,
    Maha

  • How to solve ORA-01555 for SELECT ? Thanks.

    I am running Oracle 9i on Solaris 9. I have a query that's supposed to processes massive records by joining several very big tables but dies with ORA-01555 error after hitting UNDO_RETENTION of 144000 (40 hours). The query plan looks pretty nice and robust.
    Instead of running the SELECT statement, what can be other approaches that can solve this problem?
    Thanks.

    The query plan can have flowers all over it, but saying it looks pretty nice doesn't really give us any information. We can't see your query, your table structures, your data or your execution plans or trace files, so we can't provide much help really.
    >
    ORA-01555: snapshot too old: rollback segment number string with name "string" too small
    Cause: rollback records needed by a reader for consistent read are overwritten by other writers
    Action: If in Automatic Undo Management mode, increase undo_retention setting. Otherwise, use larger rollback segments

  • [SOLVED] using squid for local cache and configuring firefox

    Hi, I have just installed squid following the instructions at http://wiki.archlinux.org/index.php/Squid and can run squidclient to retrieve webpages. The headers include
    X-Cache: HIT from localhost.localdomain
    X-Cache-Lookup: HIT from localhost.localdomain:3128
    which I take to mean the cache is working? Next I want firefox to use the proxy, but changing the settings in Edit/Preferences/Advanced/Network/Settings to localhost or 127.0.0.1 and 3128 doesn't work. Firefox can't see the proxy for some reason. I have set
    http_access allow all
    in the conf for now. How do I get firefox to use squid?
    TIA
    Last edited by jaybee (2010-07-09 13:22:52)

    It seems that entering 'localhost' rather than 'http://localhost' was what I needed.

  • How should a batch process for text alignment be configured in PDF

    Hi,
    Using Adobe Photoshop CS5 extended, how can I configure a batch process to align the text on about 700 single page pdfs (of text)?  The text consists of four tables of numbers and one page number per page.
    Thanks.

    Thanks.  I didn't think so.
    I thought it was a Photoshop question (since I know how to do it one page at a time manually in Photoshop) and I did post the question in the Photoshop Forum.  Apparently it's not possible to batch the process in Photoshop, so someone moved the question to the Acrobat Forum.

  • Need information on how to create Idoc Inbound Interfaces for Business Sys

    Hi,
    I'm losing it.
    Can anyone point me to some documentation or an example of how to create inbound interfaces for Business Systems in PI 7.1.
    Here's the scenario
    I'm working on a B2B integration process which sends inbound idocs to an ECC 6.0 system.
    I've created the Business System communication component  but under the Inbound Interfaces it is blank.
    I want to have MBGMCR.MGBMCR03 as an inbound interface.
    But I forget how to get it there.
    For Business components you can just add the inbound interface.
    I've already defined the Business System in the SLD pointed it to the correct Tech System, imported the idoc definitions in the Enterprise Service Builder and set up IDX1, IDX2 to ensure the metadata exists in PI.
    But for Business systems the hep says that it's got to come from the SLD.
    Outbound/Inbound Interfaces
    For each business system, the interfaces that are installed on the business system are also entered in the SLD. These interfaces are displayed in this frame. You cannot add any other interfaces.
    I know I've done this before, but I can't remember how.
    Cheers,
    John

    Hi John ,
    Please have a look at the following links which might be of help to you
    PI 7.1 IDocs interfaces act as operations
    http://www.sdn.sap.com/irj/scn/weblogs;?blog=/pub/wlg/7933
    /people/peter.gutsche/blog/2008/10/27/what146s-new-in-sap-netweaver-pi-71
    There is a section in the following link on IDOC , have a look at the links in that section
    https://wiki.sdn.sap.com/wiki/display/XI/ImportantBlogsand+Notes
    Best Regards

  • [IDCS2 Win]How to get Interface for ISwatchesUIDData?

    Hi All,
    Please tell me how to get the Interface for ISwatchesUIDData.
    Also please tell how to make use of GetItemList() method.
    I need to get a count of all swatches that are selected in the Swatches Pallette.
    Is this the Correct class &method that i have to use for my requirement?
    Help needed very urgent.
    Thanks
    myRiaz

    Hi Jaepil,<br /><br />Thanks a lot for your tremedous help!<br /><br />Im right now trying out [Option B]that you have suggested.<br />Please have a look at the code snippet that i have tried out.<br />When i compile this snippet i get my plugin Built but when i open the Indesign & run my plugin i get the following error"Indesign.exe has encountered a proble and needs to close" & Indesign Quits Suddenly.<br />Some where im going wrong,but dont know where.Plz help me out.<br />Here is the code:<br /><br />InterfacePtr<IApplication> app(gSession->QueryApplication());<br />InterfacePtr<IPaletteMgr> paletteMgr(app->QueryPaletteManager());<br />InterfacePtr<IPanelMgr> panelMgr(paletteMgr, UseDefaultIID());<br />InterfacePtr<IControlView>swatchPanelView(panelMgr->GetVisiblePanel(kSwatchesPanelWidge tID ));<br /> <br />InterfacePtr<ISwatchesUIDData> SwatchUID<br />(swatchPanelView,IID_ISWATCHESUIDLIST); //Here i got an error that IID_ISWATCHESUIDLIST is not declared.So i declared it myself as PMIID IID_ISWATCHESUIDLIST; is this correct?(Problem in this line only i guess!!!)<br /> <br />const UIDList &select=SwatchUID->GetItemList();     <br />sprintf(buf,"%d",select.Length());<br />CAlert::WarningAlert(buf);<br /><br />Plz tell where am i going wrong .WAITING 4 UR REPLY.<br /><br />Thanks<br />myRiaz

  • User Interfaces for Lists

    hi,
    How to create user interfaces for lists
    thanks.

    HI,
    The R/3 system automatically, generates a graphical user interface (GUI) for your lists that offers the basic functions for list processing, such as saving or printing the list. If you want to include additional functionality, such as pushbuttons, you must define your own interface status. To create a new status, the Development Workbench offers the Menu Painter. With the Menu Painter, you can create menus and application toolbars. And you can assign Function Keys to certain functions. At the beginning of the statement block of AT END-OF-SELECTION, active the status of the basic list using the statement: SET PF-STATUS ‘STATUS’.
    Cheers,
    Chandra Sekhar.

  • Interface for  BAPI for creation of Sales Order.

    hai,
    what does meant by creating interface for BAPI to create sales order. and how to create the interface for BAPI to create sales order.

    Check Transaction BDFG and BDBG.
    BDBG is to create an interface for the BAPI
    http://help.sap.com/saphelp_nw04/helpdata/en/43/b46c4b53c111d395fa00a0c94260a5/frameset.htm
    BDFG is to create an interface for the FM (non BAPI).
    http://help.sap.com/saphelp_nw04/helpdata/en/00/a814b5d05b11d6b2ca00508b6b8b11/frameset.htm
    Regards,
    Naimesh Patel

  • Interface for chess game

    Hi all,
    I am new to java and in the process of finding a job. Last week i was asked by an interviewer how to design an interface for a chess game and implement it in a class. Pls. someone help with the best answer i can give.
    Thanks in Advance !

    johndjr wrote:
    I am new to java and in the process of finding a job. Last week i was asked by an >interviewer how to design an interface for a chess game and implement it in a class. Pls. someone help with the best answer i can give.When you don't know say, "I don't know".
    If you have to ask us you will never be able to pull off the fake.
    back when I had to interview people I would take an honest I don't know or I'm not familiar with that over someone trying to make up an answer and looking like a fool.Interviewees were also required to answer questions on the spot rather than being given time to search the internet and prepare a canned response.
    In fact in any job interview I've ever had (the last not 2 years ago) that was still the norm.

Maybe you are looking for

  • How to do the latest date?

    Hi, I have multiple lines of purchase history for 1 item, what i want to select is: if the purchased date is the latest one and the memo='Y', Invoice# cost purchased_date memo 1234 $50 02/11/06 Y 2222 $50 01/15/05 N 3333 $60 09/05/04 N how do i do?

  • DNS Named will not start

    Here is my named log file error. 17-Jan-2013 14:43:32.678 general: main: notice: starting BIND 9.3.2 -u named 17-Jan-2013 14:43:32.694 general: dns/db: critical: Failed to load RRs of a zone with error 34826 17-Jan-2013 14:43:32.694 general: dns/hint

  • Need Acrobat 8 Pro response code

    My computer crashed. I am trying to reinstall Acrobat 8 Pro. This version of Acrobat 8 Pro is an upgrade from a earlier version for which I don't have the serial number anymore. During the install it asks for the current and old serial numbers. I onl

  • Simple component binding/JSF lifecycle question

    As a JSF newbie, I ran into an unexpected component binding state/JSF lifecycle issue. Given this JSP code: <h:inputText id="boundinput" binding="#{UserBean.boundInput}">and this Java setter code:        private UIInput boundInput = new UIInput();   

  • How to restore the history bookmarks ?

    How to restore the history of bookmarks. I collected them for one year. Yesterday they were still. But I have not removed them ?