HT2497 I have a new Airport Express and each time I open my laptop, I have to select my network. How to I configure to automatically go to my network
I have a new Airport Express and each time I open my laptop, I have to select my network. How to I configure to automatically go to my network>
ATOV,
Go to System Preferences...>Network>Wi-Fi>Advanced...>✓ "Remember networks this computer has joined," and click "OK."
Similar Messages
-
I have a new MacBook Pro and every time I open Safari it locks up???
I have a new MacBook Pro and every time I open Safari it locks up???
Okay, then you have made a whole bunch of trouble for yourself. First, download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then you can manually remove as many bits of PSE as you can find. Not only the application itself, but also in hard drive>library>application support>adobe. And go to your username>library>preferences and delete everything there pertaining to PSE. That library is hidden. To see it, click the Go menu in the Finder and hold down the Option key and it will appear below the little house for your user account.
Then go here to download the installer and install it from scratch. You can never move an installed copy of PSE (except for the app store version):
Download Photoshop Elements products | 9, 8, 7 -
I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
Thank you a lot in advance.I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes: Latest software versions of everything. No iPad, iPhone or Touch. Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this. The MacBook streaming iTunes is usually 12 feet from AX. I've used this setup for years of trouble-free AirTunes / Airplay until today. Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped: Turned off IPV6. Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX). Turned off 'Ask to Join new (WiFi) Networks'. Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it). Here's my discoveries: Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.) iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts. So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing). Lo and behold, the dropouts stopped altogether. No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED. That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan. Works for me, written using Chrome. The other reliable fix is to hardwire MacBook to the Switch. This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet. Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.
-
I have a new Airport Extreme and and old airport express. I am getting an amber status light on the Extreme and a green light on the Express. The Extreme is blinking amber all the time.
I have internet and everything seems to be working.
I have reset and pulled the power cord on both the extreme and the internet block
How do I make it Green?If things seem to be working OK, but the amber light is flashing......the AirPort Extreme has a message for you. To see what that might be......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon
Click on the amber dot in the small window
It might be a message that a firmware update is available for your AirPort Extreme. -
I have the airport express as router can I buy the new airport express and extend my net?
Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands. The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device. -
My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......)My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......) -
I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.
The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11 -
I play music on my hi fi via an airport express attached to my iMac.
Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before.
I have reset the airport express and reconfigure my wireless settings. I have also used Ethernet on its own but still get the same sound problems.
I would love to turn itunes sound off as you used to be able to do, but this I believe can't be done.
Has anyone else been having the same types of problem, and better still has anyone got the answer?When the AirPort Express Base Station (AX) is connected by Ethernet, you will find an option in the AirPort Utility, labeled: Enable AirTunes over Ethernet on the Music pane. Just select this option to allow streaming iTunes via the AirPort's Ethernet port. You should also be able to disable the AX's wireless so that it shouldn't interfere with the nearby TC.
-
I have just bought Airport Express and now my skype is slow. Is there a solution to this - everything else seems to be working fine
Parrotcat wrote:
I have just updated to Lion and now my folders no longer show number of items on the bottom...
In the good old days of Snow Leopard, an open Finder folder had a border along the bottom of the window which could show the number of items in that window and the total available space on the hard disk or partition that folder resides on. That bottom border is gone in Lion and those two bits of information are gone with it. Is that what you're talking about? If so, I'd like to learn how to get it back too and "Show Item Info" is not the way. -
I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, so i put the old batterys in and it still wont turn on. I am getting so angry woth apple things, the make it sound better than it is and over pice it, i paid over a grand for my imac and it dont even come with a cd SLOT. Please can some one help!
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
I have a new ipad air and it has this weird function where i have to double touch everything how can i get this to stop?
Settings > General > Accessibility > VoiceOver: OFF
On your way, tap once to select an item, double-tap to activate an item, swipe three fingers to scroll. -
I have an apple I phone and each time I get an email it notifies me how do I silence this?
I have an Apple I phone and each time I get an email I get a notification how do I silence this?
I think AnaMusic meant
Settings > Notifications > Mail > Alert Sound > None -
iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message
Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com. -
I have an IMAC, Mountain Lion. Each time I open my mail, a message box appears with the message Mail can't connect to the account "Google", followed by Enter the password for the user *****@gmail.com. The full account that appears is an account that I had previously deleted. I cannot prevent the message box from appearing. What do I have to tweak in order for this annoying box to keep reappearing. I have deleted everything I know of in Google mail and my IMAC mail. Thanks for any feedback
From the Mail menu bar, select
Window ▹ Connection Doctor
Look for the unwanted SMTP (outgoing mail) account in the window that opens. Double-click it. Another window will open, showing a list of all the outgoing mail accounts. The unwanted one will be selected. Click the minus-sign button to delete it, then click OK.
If there's more than one unwanted account, repeat. -
I currently have a linksys wireless router attached to the Internet. I have an A1264 Airport Express connected by Ethernet to the linksys router. I have two network names, one for each wireless network.
I purchased a new A1392 Airport Express to replace the linksys router and join to the A1264 Airport Express, and I want to have one network name as a result.
How do I do this? I realize that I have to reconfigure the A1264 device so that it is an extension of the A1392 device.You have a fairly complicated set up, so I suggest that it would make sense to tackle things in stages, testing each stage as you go, before proceding to the next stage.
Stage 1 would be setting up the A1392 first to the cable modem, and then making sure that everything is working correctly on the A1392 Express
Stage 2 would be adding the Netgear switch and testing each port with a laptop connected via Ethernet to make sure that everything is operational on the switch
Stage 3 would be connecting the A1264 Express and testing to make sure that it is extending the network correctly
Stage 4 would be adding other Ethernet devices to the Netgear switch and testing each one at a time before adding the next device. There is some question about whether an iOS device can print to an Ethernet connected printer....even if the printer is AirPrint compatible. You may need to connect the HP using wireless...not Ethernet....to gain full AirPrint functionality, or use another application that will allow printing like Printopia or Print Central using the Ethernet connection on the HP.
Stage 5 would be adding the printer to the A1264 AirPort Express.
You do not mention how the printer will connect to the A1264 Express, but I assume that it will be USB from your description. Most printers will work, but you really will not know if your printer will work until you try.
Remember that only printing will be supported at the USB port of the Express. If you have an all-in-one type device, scan, maintenance, and other advanced features will not be operational whent the device is connected to the AirPort Express.
If you want to print from an iOS device like an iPad or iPhone, plan to add additonal software like Printopia or Print Central to possibly allow this function. There are no guarantees here as far as the iOS devices.
Maybe you are looking for
-
WORKED FOR ME : MacBook Pro mid 2010 black screen problem
Hello Good news 'til now : Like for some mid-2010 macbook pro owners, I started to have a recurrent (daily) problem : when I was using the trackpad to do something in Opera, Safari or QuickPick (Launchpad clone), I had very often seen suddenly my lap
-
Spry accordion widget - SSI (server side include) as content in the panel
After having inserted the following command <!--# include file = "content2.asp" -> in the accordion Panel Content I get an error in Dreamweaver - every time I open the file. See the error in the attached picture. Once all files are uploaded to the se
-
Portege R600-11B - Cannot install Adobe Acrobat 9 - ActiveX issue
I have recently purchased a Portege R600-11B and have been trying to install Adobe Acrobat 9 on it by downloading from the Adobe site. I have spent several unsuccessful hours talking to Adobe to try and resolve this issue. They have concluded that my
-
Problems with SCM server 10g and Forms Developer 6i&9i
Hi, I installed SCM server 10g and try to use it with Forms developer 6i and 9i. The connection to the server works ok but when I choose the container from Source Control Options to check in forms they always go one level higher in the container hier
-
View all script labels and find an object by its script label
Hello, I have an InDesign document in which many objects get a script label. I know how to view and edit the script label of an object, but is it possible to: 1 - See a list of all the script labels of the document (as can be done with the styles for