HT2500 Apple Email "From," and "Subject" lines do not match body of email

After on and off problems with the imap server in iCloud the past couple weeks that prevented me from getting my .mac mail anywhere other than on the iCloud website, my inbox has morphed into a jumble of miss-matched Email Subject, From/Sent by, and Email Body. In other words I will double click on an email that appears to be from my niece, but when it opens it is actually an email from Amazon - or someone else! I am done with MAIL, but need HELP restoring my inboxes. I have "Rebuilt" all inboxes but it didn’t repair the problem. I have since switched to Outlook client for Mac and the problem does NOT occur with Outlook.
Ideas?

I was able to repair this by deleting a specific file - more to come. I did not have to do a complete restore.
I will check for my notes and let you know how I fixed the problem.
I think there is a good chance that Outlook mail for Mac may have been part of the problem. It requred a rebuild (pulling data from Mail?)

Similar Messages

COGI and MF47 line items not matching

Hi Guys,
I have an Issue where the COGI (Goods Movement with Errors) and MF47 (Postprocessing List for Components on Production Line) are not matching.
In COGI I can see the older records of past years where as in MF47 you can only see the the current month data.
Can someone explain to me why this discrepency is there... since mostly we understand that COGI and MF47 should match.
Thanks,
Harsh

Hi,
No discrete records will be visible in MF47, they will be only in COGI.
And in case of REM, you can see them both in MF47 and COGI.
Regards,
VNY.

Gmail / apple mail, assuming mavericks upgrade issue. Messages from/to and subject header do not match displayed message

Hi Everyone
Hoping someone has had a similar issue and can help me sort it out.
Since Upgrading to mavericks a few weeks ago, I notice the follwoing issue in my apple mail when searching older messages (newer ones seem fine at the moment).
A lot ( I cant say all, but quite a few well into the 80-90% plus of messages sent pre update) have gotten scrambled. I can search from/ to and subject headers, and they correspond with each other. But when i select the message Im looking for, the message desplayed is from a different sender (with a diferent subject)
Ex I search for JohnDoe (happens if i use search function or just go manually looking thru folders) and subject "Quote", Message comes up (or I find as in manual search). When i select the message the message displayed is not the correct one. Its From JaneDoe with a subject "Thanksgiving" and its message.
Obviously making it a little tricky to track down previous emails.
My mail provider is Gmail (which I have heard mavericks / apple mail have been having lots of issues with).
Hopeefully someone knows what I can do
Thanks
BigRed81

Hello BigRed81,
I have a question on this subject. I am having the same issue. I followed the link to the support page for rebuidling a mailbox. It states :
"When you rebuild mailboxes for IMAP and Exchange accounts, locally stored messages and attachments are discarded, and the messages and attachments are downloaded again from the server to your Mac. Your mailbox appears empty until the download is complete."
I use gmail just for my Inbox. I pull off all of my messages from the server by filing them on my mac. So my concern is if I rebuild a mailbox, my mail account is gmail imap, and I do not have copies of my emails on the gmail server anymore that I will lose the majority of my mail because there is nothing to download again.
Do you know if this will happen? Or I should not be concerned?
Thanks
Mykol

ETD and Base line are not matching

Hi All,
My requirement is in production server, for some invoices the Expected time departure and base line date are not matching,
What will be the reason behind this? Can you please advice how to approach to this problem.?
Thanks in advance
jaya.G

Hi,
could you please eloborate the issue?
Thanks,
Srinu

Smartforms: How to CC email & Include a few lines of Text in Body of email?

I have created a smartform and have it outputting PDf documents and sending then via e-mail and it all works great. Except u2026 now I would like to CC someone and also have a few lines of text in the e-mail. Does anyone have any ideas?
Here is my code:
IF p_mail = 'X'.
    wa_ctrlop-device = 'MAIL'.
    PERFORM mail_recipient_object.
    PERFORM mail_sender_object.
    PERFORM mail_appl_object CHANGING g_mail_app_obj.
ENDIF.
LOOP AT my_table.
    CONCATENATE 'ECS' comp_year izhr_emp_comp_summary-emp_lname INTO wa_outopt-tdtitle separated by space.
    CALL FUNCTION func_mod_name
      EXPORTING
        CONTROL_PARAMETERS      = wa_ctrlop
        MAIL_APPL_OBJ           = g_mail_app_obj
        MAIL_RECIPIENT          = email_recipient
        MAIL_SENDER             = email_sender
        OUTPUT_OPTIONS          = wa_outopt
        USER_SETTINGS           = u2018Xu2019
      IMPORTING
        DOCUMENT_OUTPUT_INFO    = document_output_info
        JOB_OUTPUT_INFO         = t_otfdata
      TABLES
        I_MYTABLE                 = imy_table
      EXCEPTIONS
        FORMATTING_ERROR        = 1
        INTERNAL_ERROR          = 2
        SEND_ERROR              = 3
        USER_CANCELED           = 4
        OTHERS                  = 5.
   ENDLOOP.
Determines the Recipent of the E-Mail
FORM mail_recipient_object.
CALL FUNCTION 'CREATE_RECIPIENT_OBJ_PPF'
    EXPORTING
      ip_mailaddr       = email_address     "E-mail Addr:Input Screen
      ip_type_id        = 'U'               "Internet Address
    IMPORTING
      ep_recipient_id   = email_recipient   "Recipient Obj Key
    EXCEPTIONS
      invalid_recipient = 1
      OTHERS            = 2.
IF sy-subrc <> 0.
    MESSAGE e531(0u) WITH text-003.                      "Error E-Mailing
ENDIF.
ENDFORM.    "mail_recipient_object.
*Sender of E-mail
FORM mail_sender_object.
CALL FUNCTION 'CREATE_SENDER_OBJECT_PPF'
    EXPORTING
      ip_sender      = sy-uname             "User Logged in
    IMPORTING
      ep_sender_id   = email_sender
    EXCEPTIONS
      invalid_sender = 1
      OTHERS         = 2.
IF sy-subrc <> 0.
    MESSAGE e531(0u) WITH text-e15.                      "Error E-Mailing
ENDIF.
ENDFORM.    "mail_sender_object.
*Creates Mail Application Object to E-Mail Smartform
FORM mail_appl_object CHANGING g_mail_app_obj.
SELECT SINGLE * FROM soud WHERE sapnam LIKE sy-uname AND deleted = ' '.
IF sy-subrc NE 0.
    CALL FUNCTION 'SO_USER_AUTOMATIC_INSERT'
      EXPORTING
        sapname            = sy-uname
      EXCEPTIONS
        no_insert          = 1
        sap_name_exist     = 2
        x_error            = 3
        sap_name_not_exist = 4
        OTHERS             = 5.
ENDIF.
CLEAR sofmfol_key.
sofmfol_key-type = 'FOL'.
sofmfol_key-year = soud-inbyr.
sofmfol_key-number = soud-inbno.
bor_key = sofmfol_key.
IF NOT bor_key IS INITIAL.
    swc_create_object folder 'SOFMFOL' bor_key.
    IF sy-subrc = 0.
      swc_object_to_persistent folder g_mail_app_obj.
      IF sy-subrc NE 0.
        CLEAR g_mail_app_obj.
      ENDIF.
    ENDIF.
ELSE.
    CLEAR g_mail_app_obj.
ENDIF.
ENDFORM.    "mail_appl_object.

Get rid of the smartform-based mail sending code if you can. That interface is quite old, simplistic, and inflexible (i.e., you can't do what you're asking). I would use class CL_BCS. It's especially much easier once you have developed a (custom) standard email wrapper class for sending various types of emails, including smartform-based PDF-attached emails. You can even go with HTML and dress-up your emails a bit.

I am unable to email an image from camera roll. the image gets "stuck". cannot input email address or subject line. am unable to cancel and go back to camera roll

i am unable to email images from my camera roll. the image gets "stuck". cannot insert email address or subject line. cannot cancel... return to camera roll.
what to do. i tries taking new picture and sending it in an email... same thing... gets "stuck "
Waht to do ?

Hello lohmann8,
Thank you for providing so much detail about the issue you are experiencing with emailing photos from the Camera Roll.
The first thing I recommend is quitting and relaunching the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the Photos and Camera app, I recommend restarting your phone and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

TS3899 I can't read the body of my email messages in iCloud and thru Internet. Only see to and subject line fields

I'm unable to read the body message of my emails. I've tried reading thru iCloud and also through the web browser of yahoo. It was working right yesterday. Today, I only see the to and subject line fields when I click on it to read.

Try closing the Mail app completely and see if they show when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How to email purchase order along with body and subject line

hi experts,
i have to email the purchase order along with the body and subject line. I am able to send the purchase order as a pdf attachment, but i have still not got a solution how to add body and subject line to this mail.
plz help me out.

Hi Santosh,
if you investigate a little bit the PO output, you can find following information in SRM output customizing:
POs are edited by methode PROCESS_BBP_PO_MAI from class CL_PD_PO_PROCESSING_BBP.
Subject, body and attachments are handled here.
So create your own class and method, and assign them in this customizing point (SRM Server --> Cross-Application Basic Settings --> Set Output Actions and Output Format --> Define Actions for Purchase Order Output).
Rgds
Christophe
PS: please reward points for helpfull answers

Can you create a To Do from the Subject line of an email?

Does anyone know if it's possible to create a To Do from the subject line of an email in Mail?
Here's what I'm trying to do. I open a mail message, then I can highlight any text in the body of the message. When I do this, the To Do button becomes enabled. If I highlight the subject of the message, the To Do button remains disabled.
Is there any way of doing this aside from highlighting text, then changing the text?
Thanks!

Open Mail Help from the Help menu. One of the main topics listed is how to create to-dos. Click on it to see what you are able "to do."

My email will only show the sender and subject lines, but no content. What can I do?m

My email will only show the sender and subject lines and does not show the content of received emails on my ipad. How can I fix this?

I am having the same problem. As recently as this morning, I could read entire hotmail emails on my iPhone 4 now, I can see only the sender & subject. What us up? Any solutions? Thank you.

Why do I have a font problem in my FROM and TO lines?

I have converted this week from Entourage to Apple Mail. I'm getting used to it, but really miss the formatting capabilities of Entourage. Given Apple's mastery of fonts and typography, how did Apple Mail end up being so basic?
But more immediate is a font conflict I seem to be having on the FROM and TO lines of each email. On my screen those lines appear blank, with the names instead showing up on the SUBJECT line, all jumbled together. Completely unreadable.
I am using Suitcase Fusion 12.1.1, and I suspect this might be part of my problem. But has anyone out there seen this before? I'd rather not start playing with Fusion if I can avoid it!
Thanks...

Thank you for the speedy reply, Allan. Yes, I wondered if I was looking at a font conflict. How do I best tackle that? I thought I understood Suitcase Fusion, but I have to admit that I'm wondering if I caused more harm than good. I cannot just simply close it, since it seems to have moved my original fonts, and I am then left without the ones I need.
Maybe this is no longer an Apple Mail question, but how do I best move forward in assessing and resolving this?
Thanks again
Lorne

From and subject field are blank using imap account in mail.app

Recently I changed my account from pop3 to imap.
If I retrieve mail with mail.app first normally I get proper headers displayed in the message list window.
If I READ the email on my iPhone 4 let alone respond to it, etc. and then go back to my mail.app all emails I chose to read, reply to, etc. have blank from, to, and subject lines in the message list window. They appear ok in the message window but not the message list window.
Some people have same issues, but I haven't found any respons to get this fixed!!
I hope someone can help me solving this problem.
Best wishes.
Simon

In the Mail Preferences/Accounts/Advanced what have you selected with regard to Keep copies of messages and their attachments for Offline Viewing?
Also, does your provider's IMAP server support use of the IDLE Command? If getting push email on the iPhone, considered deselecting this if currently selected -- it can cause problems with servers not fully supporting it.
I think it may be useful to purge the Envelope Index file from the Mail folder. Force a reindexing by deleting the Envelope Index. With IMAP or Exchange account, forcing reindexing requires removing the account folder. See:
http://docs.info.apple.com/article.html?path=Mail/4.0/en/14019.html
Ask any questions needed to get comfortable with doing this.
Ernie
Message was edited by: Ernie Stamper

Submit by email button ignoring specified email address and subject

I have recently upgraded to CS5.5 and I am having trouble with the Submit by Email button in my form.
When I distribute the form the email address and subject specified on the button are ignored. Instead, the form is submitted to my email address with the subject of 'Submitting Completed Form'.
I have tried creating the form a number of different ways (i.e. converting PDF created in inDesign, just in Acrobat from scratch, just in Livecycle Designer from scratch) with no success and the same result. I have found I can change the email address if I go to Acrobat X Pro: Edit > Preferences > Identity but this is not an adequate work-around and does not fix the issue of the subject.
My company develops forms for both internal and external clients that require this functionality. The email subject is used to help identify which form it is and routes it to the appropriate department.
I have searched the web and this forum for answers but have not found an answer.
My question is: How do I get the 'Submit by Email' button to work correctly?
I have created many forms before using CS3 and have never encountered this problem. At the moment the only way I can see to fix the problem is to go back to CS3 which seems ridiculous. I thought later versions of software were supposed to work better not look the same and not work (sorry for the rant, frustration is getting the better of me).
I need to use the Distribute Form as it states in the LiveCycle help:
If you do not use the Distribute feature, form recipients who use Adobe Reader cannot save modifications to most PDF files, including forms filled with data. They must either immediately return their data electronically or print the form and return the paper copy.
I am using Acrobat 10 Pro and Livecycle Designer on Windows 7 64-Bit
Any help will be greatly appreciated.

What you are seeing is the intended behavior and I'm not sure why is has changed.
When you distribute a form, it substitutes the email address you originally set up with the button with the one specified in your identity preference and the subject is set to "Submitting Completed Form". It makes a number of other changes to the document that make the distribution workflow possible. I do know that different code is used if the form is being used in a version of Acrobat/Reader prior to 9.
With an acroform (not XFA), you can save a copy of the distributed form, allowing you to edit the scripts that among other things set the subject line of the email, so that a different subject line text is used. You can then re-enable the form and it should work OK. The problem is knowing exactly what needs to be changed and finding it, and I'm not certain that this is possible with an XFA form. I normally work with acroforms and know where to do it in Acrobat, but things are different in LiveCycle Designer.

Remove a meeting on specific time date and subject line

Hi
I have a situation where a meeting organizer is no longer able to update or cancel a meeting she booked. Some how she also became the participant of the meeting and now has lost control of the actual meeting. Not able to edit or send update. I've exhausted
my efforts in trying to find a solution for this. Doesn't look like there is anyway to get back ownership or transfer it to someone else.
So my next plan is to remove the meeting from everyone's calendar via a script. So my question is, is there a way to remove a meeting from all participants calendar where the date/time and subject line is known. This is to ensure only that meeting is removed
from the calendar.
or if anyone has some other ideas please do share. I need to somehow send notification of cancellation and remove the meeting from outlook and the organizer has no control anymore.
Thanks

Hi,
Per my understanding, you might want to display all the specific documents in a page, they can be filtered by values of a Date and time column.
A possible solution I will provide is that, we can create custom visual web part to display all these documents. In the code behind, run a query with CAML to retrieved all the
documents with the specific date and time, then generate a view of hyperlinks that points to these documents.
In this way, we can combine the filter component with the data display component into one web part, with the help of CAML query and Object Model, it would not be a tough job to
implement such a solution.
More information about CAML and Object Model:
https://msdn.microsoft.com/en-us/library/office/ee536691%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

From and subject text is missing in listview (imap)

Hi all,
I have just setup mail 3.0 and all messages+folders are downloaded correct. But messages are missing the From and Subject text in the list view, the place where text normally is written is just blank so I can not see whom the email is from and what it's about.
Once I click on a message it opens up perfectly in the message view and all details are available (from, to, date, etc...). Got damm wired
I'm running with IMAP through a danish host called Azero and I think they are running with Merak Mail Server (http://www.icewarp.com/Products/MerakEmail_ServerSoftware/)
I hope somebody can help me.
Cheers,
Jesper

so this is strange... i tried the exact same process on 3 machines with the same mail account set up. on the first machine, i selected the mailbox, went to Mailbox>Rebuild. Mailbox rebuilt without any issues, all old mail that was missing From/Subject fields were fixed and all new mail comes through without any issues.
I tried the same thing on two other machines with Merak IMAP accounts on them and on one machine, ALL previous mail that had been correctly displaying From/Subject fields had those fields deleted but date received displayed just fine. I could also click on the blank line and the message would display correctly in the Mail window's preview pane below the list view.
On the third and final machine, rebuilding the mailbox wiped the mailbox COMPLETELY. Folders displayed but they were empty.
I'm submitting a support ticket to Merak as soon as I'm done typing this
.//chris

HT2500 Apple Email "From," and "Subject" lines do not match body of email

Similar Messages

Maybe you are looking for