HT2500 Sometimes after I read an email and leave it in my Inbox, I then can't open it again. I can reply to it, but I can't open it again. This is happening more and more often.
Sometimes after I read an email and leave it in my Inbox, I then can't open it again. I can reply to it, but I can't open it again. This is happening more and more often.
I see you are on 10.6.8. There have been a few Mail problems of late, particularly I notice, since the last security update.
Suggest you run the Snow Leopard combo update Mac OS X 10.6.8 Update Combo v1.1 (again) even if you have previously done it. Won't do any harm.
Then check software update and try again with mail. You should be on mail 4.6. (1085)
Similar Messages
-
Can't use my Comcast/Xfinity email on mozilla any more have to use google chrome to access it. I can log on through comcast/xfinity homepage but it will not let me read my email, just keeps redirecting me to inbox preview. I used to have no problem before firefox 7. Can this be corrected? Or should I discontinue using Firefox?
Thank you! Thank You! Thank You!!! I have been arguing with Comcast for 6 months on this. They told me to uninstall and reinstall Firefox. Then I found this website and there was my solution. It worked. It was annoying that they told me to use internet explorer. The worst part is I pay them monthly. Well, as soon as my contract is up, I am done with Comcast. They still haven't figured out why my favorite stations aren't coming in. Funny thing is my roommate has Direct t.v. with no problems. At half the price. See ya Comcast. I am done paying for shabby over priced service. Thank you Firefox. I can't believe I pay for crappy service and this is free.
-
It's like it booted to a state it was in several months ago. My CS 5 apps are not in the dock or applications folder. Has this ever happened before and what can I do?
The files on my desktop are not the ones that were there when I shut down. It's like it's gone back in time.
My display's power supply got fried (I think) in a power outage so I bought a new one. However, every time I restart the display usually stays black. I have found I need to keep rebooting until it kicks in and starts working. I unplug everything, wait a while (a few minutes to overnight) and try booting again.
This last time the display finally came on but I'm faced with this problem. I used to use time machine, but I deleted everything and disabled it a couple months ago or more so I'm at aloss as to why the mac is booting into the state it was in sevearl months ago.
What could I have done to cause this? Has this ever happened to anyone else and is there a solution?
Note: I did a search for a file I knew was created today. I found it and it showed that it was a file I had saved on the desktop this morning--even though that file's icon is not appearing on the desktop now.
I did a search for photoshop and saw my CS5 version listed.
However, I did a couple more searches and these files no longer appear in the search. I don't know if they're there or not. This is bizarre!
I'm on a Mac Pro, 10.6.2.Thanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
I'm back to normal again. -
I keep getting pop ups that say my subscription has expired? I have paid and have credit because this has happened before and i paid 3 times. Can I just buy a download instead of paying a monthly subscription?
We often find this happens when the wrong software gets run (so the subscription doesn't apply).
So,to start with what exactly is your subscription for - please check your account details and confirming email? -
When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?
asifmanzoor wrote:
i have 10.7.2, this download is 10.7.5
Are you Downloading it from here > http://support.apple.com/kb/dl1582
asifmanzoor wrote:
yes, i am using wifi
1) Turn your Wi-Fi router OFF... wait 30 seconds... Turn it back ON.
OR...
Do not use Wi-Fi and connect Directly to your Internet via ethernet cable. -
I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora -
Is there a way to remove my facebook contacts from my phone contacts list? I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out through the settings feature or anything else....HELP please as it is annoying to see all of these contacts!
Hello ymprice91277, let's solve this mystery! To unlink the Facebook contacts go to Settings, Facebook, turn off contacts.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
I bought an iPhone 5; 16GB and after updating to ios 7 am unable to bypass the activation screen because am told is locked to the owner's iCloud account but I can't contact the owner. What can i do to rectify the situation. Bought the phone for $500.
http://support.apple.com/kb/HT5818:
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account. -
When priniting jewel case inserts, my song order is reversed. The numbering is correct, but the song titles are incorrect. This only happens on jewel case inserts. Any insight would be greatly appreciated.
Hi,
I have exactly, exactly!! thesame annoying problem you have or had. I don't know what to do and i am reallyfrustrated with the dumb limited inside the box solutions offered to me. It'slike if you have a problem with your ipod or iphone you can either restore it,uninstall/reinstall itunes and thats pretty much it. I am sorry but that isjust f***** up.
anyway, regardless to all that,i was wondering if you had any success in solving this problem (something otherthan using a different computer which oddly enough seemed to work for somereason..?? why???, weird) since April.
I am on the edge of givingup.
thank you in advance. -
my iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.
-
I have iPhoto 11, version 9.4.1 installed. When my library upgraded, I got a message that the photos couldn't be inported and I need to repair iPhoto permissions. How do I do that? My photos are there, but I can no oonger drag them to the photo stream.
Disable Photo Stream in iPhoto's preferences and then go back and reenable it. See if that will jump start the process. If that doesn't help try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto check its preferences to meka sure all is as you expect and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer
If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/ -
put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer
It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ? -
i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?
I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown
Maybe you are looking for
-
Text caption visible on slide but not when running project
I am using Captivate v4. I have one slide of 64 where the text cpation is seen on the slide and runs correctly when using F3 - but when I run the project / F10 the text caption does not appear. I have copied the slide with this error onto a blank pro
-
XML Schema to generate table data from a repeating subform data
Hi All, I would like to have a check box that when checked, will hide a quotation form, and make a purchase order form visible, carrying over some of the field data from the quotation form into a new table on the Purchase order form. I've attached th
-
How to concatenate the values in single row with images or colours
hi all, i am apex 4.2, i tried to execute a plsql query for the values concatenate two values into same column example in my table i am having teachers list one can teach two or three subjects in table i am saving like teacher_id teache
-
Problem Uninstalling JRE 1.4.2_01
Hi, i am having problems silently uninstalling JRE 1.4.2_01 on windows XP wonder if anyone can help, When running the silent uninstall command....... j2re-1_4_2_01-windows-i586.exe /s /v "/qn REBOOT=Suppress" /x......nothing happens. I am trying to u
-
Best options for converting keynote slides to DVD?
Hi: I'm working on creating a Keynote presentation that will eventually be a loop running on DVD. Exporting the presentation directly to Quicktime and then using Final Cut/DVD Studio Pro. Unfortunately, the quality of the images (as mentioned elsewhe