HT3231 Starting the opening program over?

I migrated with Migration Assistant from an old to new Macbook Pro. NONE of my files OF ANY KIND were migrated. So, far this assistant fails miserably the usefulness test. The question is how can I start over? Now, I plan to migrate from a Ime Machine, if that works. What ever happened to the old firewire/old laptop-is-a-hard drive routine?.

swic17 wrote:
What ever happened to the old firewire/old laptop-is-a-hard drive routine?.
This happened:
<http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1443.html>

Similar Messages

  • Before closing down the machine, how can I close all the open programs?

    Now that the iMac automauically starts up with the programs in use when closing, I find that this is delaying my start.
    There must be a shortcut to close all the open programs before closing the machine.
    Kindly advise.

    If by 'closing' the machine you mean shutting it down, there is a checkbox in the Shutdown confirmation window which is preset to re-start all apps at startup which were open when the machine was shut down. Uncheck that item in the Shutdown confirmation window.
    Unfortunately you'll need to do that each time you shut the machine down.

  • (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elem

    (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
    (2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
    Thanks
    Sam

    TidyCup
    What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
    But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
    1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
    To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
    or
    with your mouse cursor draw a rectangle around the clips that you want to select
    2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
    Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
    Are you asking about photos with landscape or portrait orientation?
    The pan and zoom tool does one photo at a time.
    Have you read the Adobe documentation on the Pan and Zoom Tool?
    http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
    Please review and clarify and then we can get into greater details on this.
    Thanks.
    ATR

  • Error 8 when starting the extraction program

    HI all
    I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
    Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
    Regards
    alex

    Alex,
    Check the following OSS notes
    947690
    511475
    23538
    Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
    Abdul

  • Error 8 when starting the extraction program (BI7.x)

    I am receiving the following message when loading from the ODS to the data targets:
    Error 8 when starting the extraction program
    Message no. R3019
    Diagnosis
    Error 8 occurred when starting the data extraction program.
    System response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or create a problem message of your own.
    I have searched the forums and OSS, and can't find anything that matches my situation exactly.  I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system.  I restored the BIP client and all transfer structures were reactivated.  Now when I try to load, I get this error 8.  Has anyone experienced this issue?
    Thanks,
    Pam

    Josko,
    I am also using BI 7.x and had the problem loading from DSO to Infocube.  What are the entries in table ROIDCPRMS?  What is the host name displayed when you run transaction SM51 in the BI system?
    Pam

  • Error 4 when starting the extraction program

    Hello Gurus,
    Yesteday I got one error "Error occured in the source system"that "Error 4 when starting the extraction program" and "error in the source system" has given, it has affected all the loads,please any one give me solution for thia it is urjent.
    Please find the error message bello.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    An error occurred in Service API .
    Check the error message.
    Procedure
    The procedure for removing errors takes place depending on
    the error message:
    Note
    If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is
    Thanks,
    Muddu Reddy.

    Hi sekhar,
    You can try this. you right click on the datasource and click on display in source system it takes you to the R/3 system enter the user id and password so u can now see the datasource in the R/3 so now click on back f3 so now u vl be in BI now replicate the datasource and try to load the data. I think now it should work fine.
    Tell me if you still face some problem.
    Thanks
    Ram

  • Terminal Service - enable the "Start the following program at logon" cause my remote printer won't redirected?

    After I enable the "Start the following program at logon" on my User account windows 2003 Server R2 cause my remote printer won't redirected when the Remote User is logon to the Server, I don't know why? I checked the Terminal Services Configuration already
    and everything is fine.
    And for you information, If I disable the "Start the following program at logon", the printer is redirected again, did I miss something in here?
    Thanks
    dkirwan

    Hi,
    I suspect that this application conflicts with Terminal printer redirection, whether all applications using "Start the following program at logon" option have this
    issue or not. You may try another application to see if the issue is gone.
    If your client PC is Windows XP, you may need install the Remote Desktop Connection 7.
    http://support.microsoft.com/kb/969084/en-us
    Technology changes life……

  • Start the following program on RDP session goes to desktop

    I had a single user doing this:
    When setting the start the following program in a RDP client Connection, he goes to Desktop and don’t start anything.
    With all other users, include the domain administrator he starts well. And more…
    I clone the user in AD, and with the new user everything is OK. 

    Hi Xelah,
    According to the description , the first thing came into my mind is group policy .
    Because there is an user configuration when you use "start the following program in a RDP connection" :
    https://technet.microsoft.com/en-us/library/cc770821.aspx
    I would suggest you to move that user to a new OU then configure a new gp and link to the new OS to check the result .
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Tried restoring phone and it doesnt fiuly restore it starts the restore process over again

    My Phone stopped responding, than when I tried to shut it off and charge it, it gave me the screen to conect to itunes. I connect to itunes and it tels me to restore. I go through the whole restore process and it just keeps starting the restoring process over. PLEASE HELP!

    you may have to do these steps a few times http://support.apple.com/kb/HT1808

  • Start-up opens Programs

    I have an iMac 24 with OS X Lion.  During start-up multiple programs open up and clutter the desk top.  How  can I control this?

    Also when you restart or shutdown you should be presented with this screen.
    Unchecking the tick will prevent any app that was open when you shutdown/restart (other than startup items) launching.

  • HT5624 I just updated the software on my iPad and now can't get all the open files to close as I used to in older version. When I double-click the round button, the open programs show up, but I can't hold down to have the "x" appear to close them. Help.

    I just downloaded the updated software and now can't shut down open programs like I used to by holding downthe round button, having them appear at the bottom of the screen, holding them down for the "x" to appear and then closing them by clicking "x". I can get the program icons to appear, but don't know how to shut them off now.

    Swipe up or drag up on the app window to close the app.

  • My mission control isn't mission controlling.  It was showing all apps open, but now it just shows the dashboard and not all the open programs.  Is there something I can do so it shows all the open programs again?

    All of a sudden my mission control stopped showing all of the open applications.  is there a button i hit by mistake?  It only shows dashboard and the home screen.

    Connect the iPod to your computer and let it charge for a couple of hours. The try to backup the iPod
    iOS: How to back up and restore your content
    Then
    Photos
    - If they are in an iPod backup then restore an iPod, iPhone or iPad from that backup. See the restore topic of:
    iOS: How to back up
    - If they are in the iTunes backup then get them from the backup by:
    Recover iPhone, iPad or iPod photos from backups with Picturescue
    or
    iPhone Backup Extractor for Windows and Mac
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer
    To try to make your iPod work see the following. It may end up erasing the iPod:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1498 Why do rented movies on AppleTV have to start the download all over again if I didn't watch it yesterday?

    I rented a 1080p movie using AppleTV (3rd gen) several days ago. But the download time was so slow that I decided to let it download &amp; watch it another day. Two days later I tried to watch it and the long slow download started all over again. So again I let it load intending to watch it the next day. When I wanted to watch it yesterday SAME THING ALL OVER AGAIN! Why is this happening? Isn't ATV's hard drive big enough to store it? The movie cover always showed in the "rented" section but obviously wasn't really there.

    Yes - presumably you've set up Home Sharing and can stream from the Mac using the Computers icon to access your itunes library on AppleTV?
    If you rent in iTunes you have to wait for the whole movie to download (appleTV lets you watch when it thinks the length of the movie is long enough to complete the download as you watch).
    Once downloaded via iTunes it'll stay on the Mac for up to 30 days, but will also be available on AppleTV under a new Rentals column in the Computers section for your iTunes library - Rentals appears along with Movies, TV Shows etc but only when there's a fully downloaded rental to stream from the computer.
    One thing to be aware of is that some titles are only available in HD on AppleTV not via iTunes.
    You might want to experiment SD vs HD anyway as SD downloads far quicker.
    AC

  • Is it possible to stop the system time outs on my imac ,i have tried 5 times in the last 24 hrs.each time it will go for maybe 3hrs and then times out.each time i have to start the download all over again,thanks,

    is it possible to stop the system time out on my imac? i have tried 5 times in the last 24 hrs.it will run for approx.3hrs,and then times out and i have to start
    from the beggining again

    What is the url of the file your are downloading?
    What web browser are you using?
    What type of connection do you have to your isp?  phone line, dsl, cable, fios...
    Try iCab.  It lets you restart a download.
    icab.de
    Robert

  • How to reset the Face Recognition on folder to start the search/detection over again.

    I was going along fine (though very slowly) and had 5000 photos identified as my son. Hours later I was down to a few handful of photo and did a select all and dragged then to my son's named photo. After that I can still see all the photos of him, but Lightroom does not look to detect face on any of the pictures. I tried Photos--> People and all is greyed out. The first run through it detected them (until I did the Select all) and all the photos are still there. It is like Lightroom does not think there are people in the picture and there are , or it thinks that it already analyzed them and will keep doing so.
    Is there a way to tell Lightroom to re-analyse this folder (5k of photos) to look for people again. Lightroom seems to have forgotten the Face Regions?
    All the other proper in the 5K photos are designed correctly.

    I agree with Zim. When you start Toshiba Face recognition tool click on option register Face.
    On the right side click on Next and start to practice the face recognition option. For the first time using the face recognition, practicing is very useful. If you choose skip the recognition will start without practicing.
    Toshiba Face recognition tool takes a digital snapshot of the users face to create a unique password by digital mapping of key features of the users face. Please set also password. Password (inputting through keyboard) is the backup solution when user cannot log-on by face recognition through Web Camera.
    It is not complicated. Just follow menu on the screen.

Maybe you are looking for

  • MS Word Template in Content Server

    Hi, we have this problem. we have a Z transactions asking the user to give some data and save it in a table with key number, the user can attach several documents (.DOC) from local pc and transaction use content server to store these documents and li

  • Font Size for Dropdown List Box

    Hi All, We are in ECC 6.0 with Integrated ITS. We have a 'Z' EWT transaction with a corresponding service maintained in SICF being executed via ITS and/or Portals. The problem is that the font sizes for the dropdown list values for all these input fi

  • Read a structure written in VC

    I have written a structure in VC and saved to a file, I want to read the file in LV8.0 but I cann't get the right result, the structure is  below: struct Save_Data {   int  A1;   int  A2;    double A3;    double A4;   double A5;   double A6;   double

  • Is it possible to define a new enumeration format?

    Hi there, I'd like to know if there is an chance to define a new enumeration format. I hope that "enumeration format" is the right translation for "Nummerierungsformat" from the german language. What I want to do habe is an enumeration that contains

  • Error in inserting data to database

    I am using SQL to store the data, When I am insterting the data to my table then I am getting error 2147217833. Attached image for table structure and method the way I am insterting the record. I am using LV2011. I am able to connect to database but