HT3500 Mac finds Epson printer only once, than it is disconnected (wifi)

I am able to connect my Epson Workforce WF-3520DWF printer to my router and it is found wireless.
I can print with Mac, wireless, exactly ONE time after installation.
After that the printer is no longer found.
Searching the internet, learns me it's a know problem.
Come on Apple, why can't this be solved?

Morning LCWo,
Thanks for using Apple Support Communities.
Disregard 10.6 and 10.7. The rules still apply.
For troubleshooting on this, take a look at this article:
Troubleshooting printer issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/TS3147
Hope this helps,
Mario

Similar Messages

Purchase Order printed only once

Hello.
I need to print the PO automatically when I create it.
But if the PO is changed or release it sholdn't printed again automatically.
How can I configure the message for this purpose?
Is it possible print only once?
Thank you in advance.
Regards.

Hi,
In Standard only PO Printing is possible after PO release.But if business needed, you can develop a DRAFT COPY OF PO PRINT OUT with help of ABAPer before PO release.
After release if you needed automatic PO print then need to set Dispatch time as 4 {Send immediately (when saving the application)} in NACE t.code in application EF & in condition record t.code:MN04 for PO message type.
As you needed ,only once print and no further PO print , then do not select" Multiple Issuing" check box in General data TAB for your required PO output type in NACE t.code in application EF .
Regards,
Biju K

After installing Snow Leopard, Word for Mac X document prints only top 1/3. Excel, PDF is fine...only word is a problem.

Installed Snow Leopard and later in week went to print out a full page word document (Word for Mac X) and it only printed top 1/3 of page. Checked with PDF and Excel documents and all printed out OK. TextEdit is fine in printing as well. Then created a new document with a sentence on top of page and a sentence on bottom - printed fine.
Any suggestions would be appreciated.

Since your problem is only w/a Microsoft product, you should contact Microsoft for Mac Support and/or post in their forums.

Cp1518 - on a mac - is there a way to choose only black and white printing only rather than overide?

as above - can I just choose to do black and white only, or grayscale pictures on my cp1518? alot of the time that is all I want.
Thanks

I suppose that would have helped! Here is an image. I am imagining a more "white" look even with a transparency. I have to print this 4c digitally, and i'm worried because my printout looks even more orange-y/pink than what you see on screen.
I will try what you suggested in Photoshop, but let me know if you think of something else once you see the image.
Thanks!

Help with Epson 265 cant find epson driver only gutenprint!

I hope you can help - Epson are no help!
I have and Epson R265 - it does print but will not allow any other utility maintenance. This means I cannot check on cartridge ink levels, clean nozzles etc.
I have read and re-read all the instructions about not using the Gutenprint driver but cannot find any of the other Epson 'official' drivers here on my iMac despite installing them from Epson's site.
Please help!
Karen

Hi Karen and welcome to Apple Discussions.
Do you mean you can't find the drivers on your computer? The actual files are located in (user)/Library/Printers or in bootvolume/Library/Printers.
Which driver version are you using? _[According to Epson, the latest version is 6.10|http://esupport.epson-europe.com/ProductHome.aspx?lng=en-GB&data=wsMoc1iCh VFkpIJHxGzU002Fw3ewZInBGepzWqN4djOtqlEU003D&tc=6#7]_.
I did see this thread re how AppleGrapple had managed to get his R265 to work.
Let us know how it goes.
/p

Macbook pro with osx 10.8.5 won't find epson printer via wifi

i have tried every option i found on-line. i inserted driver cd to no avail. help with getting macbook pro to recognize printer via wifi please.

So Does Maverick Fix this issue?
Im trying to sort out my inlaws wireless printing issues. They have a mac running 10.6.8 works fine wirelessly and USB. They have another mac running 10.8.5 and this mac will not see the printer directly. I can print via mac 1 using a shared connection. But if you deselect mac 1 sharing options then mac 2 cannot see the printer. I can print via usb and via the shared connection using mac 1. But not directly.... So if Bonjour is no good on 10.8.5 does the update to mavericks fix it?
Thanks

XML output summary information how to print only once ? ( oracle 9.2 db )

Hi,
I am having following SQL
select xmlelement("Emp",
xmlforest('testing' "Type"),
xmlagg(xmlelement("Transaction", xmlforest(empno "Number",
ename "Name",
sal "Sal")
.extract('/*')
from emp, ( select count(*) totcount, sum(sal) totsal
from emp ) x1
It is giving me following output
<Emp>
<Type>testing</Type>
<Transaction>
<Number>7369</Number>
<Name>SMITH</Name>
<Sal>800</Sal>
</Transaction>
<Transaction>
<Number>7499</Number>
<Name>ALLEN</Name>
<Sal>1600</Sal>
</Transaction>
I want to print totcount, totalsalary ...etc at starting of XML output
My Desired output
<Emp>
<Type>testing</Type>
<Recs>10</Recs> =>
<TotSal>10000</TotSal> =>
<Transaction>
<Number>7369</Number>
<Name>SMITH</Name>
<Sal>800</Sal>
</Transaction>
<Transaction>
<Number>7499</Number>
<Name>ALLEN</Name>
<Sal>1600</Sal>
</Transaction>
How to do this ? If I change my SQL to
xmlforest('testing' "Type", totcount "Recs"),
I am getting following error
ERROR at line 2:
ORA-00937: not a single-group group function
Kindly suggest me urgently.
thanks & regards
PJP

Guys any idea on this? I am in very much in need of this solution. Please suggest me .
Thanks
Rao

Print should come only once per document number

Hi All,
I have done a script for the WC Document,
But now the client requires it to print it only once for a particular document number,
How can we do. Is there any such coding to restrict the print only once per document.
If anyone knows the solution please post it

hi
check the entry in nast table if you find more than 1 enrty that is repeated print .....
select objky
         kschl
         erdat
         eruhr
         vstat from nast into table gt_date
         where objky eq gv_del_num. ---> document number
if sy-subrc eq 0.
    sort gt_date by objky erdat descending .
    describe table gt_date lines lv_n.
    if lv_n gt 1.
      gv_repeat = lc_x.
    endif.

When i try to print emails, it only prints first part of email. it is not a problem with my epson printer, could it be a firefox issue or is it an issue with my service provider att/yahoo?

my epson printer only prints the part of email that shows on my screen before scrolling down. i have checked with epson tech and it is not a printer problem. can you help?

Problems like that with Firefox printing look like they are fixed in Firefox 4.

Cannot print a pdf off my mac 10.6.x. I can print all other files Epson printer 'Cancelling'

Cannot print any pdf from my mac to Epson printer
I can print all other files except pdf
Using the most updated Adobe Reader XI
Using the latest driver for the printer from Epson
Using a USB cable
Whats up?

I have the same problem, I cannot print ANY PDF file from my Mac running 10.8.5 Mountain Lion and using Adobe ReaderXI 11.0.4 I have verified that all files print properly when printed from within Preview or within Libre office. There is no option in the Mac Adobe reader to reset the installation like there is on Windows. I have also tried deleting reader completely and re-installing and the same behavior.

I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

Do you have a TM backup or a clone? If so, erase the drive and restore with TM or clone back.
If not you'll have to reformat and re-install the OS that shipped with your Mac. If it shipped with Lion or ML you can do the restore from your Recovery Volume
EDIT: I assume you are saying that you just installed 10.8?

HT3500 I have a new epson wireless printer but can not get my Mac laptop to print to it even after doing the installations. What do I need to do

I have a new epson wireless printer but cnannot get my Mac laptop to print to it. Any suggestions

Can you find your printer in Print & Fax?

Has any body tried using canon printer driver with Mac OS X v10.7. I just bought a new printer only finding out that I cannot use it. Any suggestions. Thanks

I just bought a canon pixma iX6540 printer only to find out that the driver is not supported. I am using Mac OS X v10.7. Can someone help please. Thanks

Although it mentions OS 10.6 on the link, have you tried downloading the latest drivers - if you haven't already - from the Apple Support site, maybe they'll work:
http://support.apple.com/kb/DL899

My Epson photo 1280 will only print 1/2 of a page from a document in Pages program. First print was fine. Have printed out a Mac templet and printer does same thing. Cleaned heads, checked nozzels etc. Any ideas?

My Epson photo 1280 will only print 1/2 of a page from a document in Pages program. First print was fine. Have printed out a Mac templet and printer does same thing. Cleaned heads, checked nozzels etc. Any ideas?

Hello, I have exactly the same problem. I could have written the same text. And I have'nt found solutions. Except, perhaps, change this printer (and quit HP?).
Any suggestions would be really much appreciated.
Thank you for your possible responses.

Since downloading Mtn.Lion my epson printer doesn't work correctly & the entire system seems to be slower plus my iMac now disconnects from my wifi every time the mac sleeps. Can anyone help me with these issues?

I am having problems with my Imac (approx 1 yr old) every since I downloaded (from the App.Store) Mountain Lion. I am a working mom with 3 toddlers.....I have very little time to work on the computer which I primarily use for photograhpy needs. I am not computer savvy enough to figure out how to "fix" the new issues/problems and am frustrated. I am hoping someone can help me........
Issues just since downloading Mountain Lion:
1) My Epson R2400 printer is not printing properly. It wouldnt print at all from CS5 the first 2 days. Then just started printing. The prints aren't nearly as good as they used to be. I just installed Photoshop Elements 10 and have been able to print but the prints are just awful. I printed a test page and it was perfect. I've triple checked the settings in the print dialogue box to ensure the correct paper is chosen, etc. I've never let the printer manage the color before but it is the only option that gives a mediocre print at best.
     I've gone to Epson.com.   It says to update driver through Apple for Mtn. Lion. According to my computer I have no updates. Printer is connected via USB. Changed the ports, turned printer on & off. Emailed epson & they said to reset the print queue, which I did. Restarted the IMac Still no luck. (The error message I got when trying to print from CS5 is "filter failed." But, as stated before it just started printing today as I was typing this.
      I print out pics quite a bit and it seems the only time I have ever had problems is when I upgraded the OSX system. Why is that?? When I upgraded to 10.7 is when I first realized my print quality went down.
2) Now every time I "wake" up my computer it has become offline and has to go through the steps to reconnect to my wifi. Never did that before Mtn.Lion. I purchased the Airport Extreme Dec 2011. My computer was always connected before the update. Now I have to scroll down & pick my network & wait for it to connect before proceeding.   I double checked preferences and it is set up to check for updates automatically. What is that about??
3) It just seems that my system overall is slower. I love my mac but I am frustrated because I don't have the free time needed to do all this problem solving. I just need it to work properly when I have a few minutes to work on a picture. I imagine there are other issues, but these are the only 2 areas I've focused on since the upgrade.
I've read different views/feedback on Mtn Lion but haven't come across the printer issue or the wifi connection issue.
Can anyone direct me towards a solution? I really appreciate it!
T

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

HT3500 Mac finds Epson printer only once, than it is disconnected (wifi)

Similar Messages

Maybe you are looking for