HT3728 how do I see IP addresses of connected devices to my airport extreme

I'm trying to reuse a Net Gear N600 router I had to shelve since I installed my Airport Extreme router as an access point.  I need to see other IP addresses so I can configure the N600 IP address as 10.0.1.xxx.  The only way to make sure I don't use an already used IP address for the N600 is to see what IP addresses are used by the system.
The only support I've found here is how to set up a distributed network using other apple airport extreme devices.
Has anyone done/added a second non-apple router configured as an access point to an airport extreme.  If you have please let me know what you did.  I intend to have the N600 connected via ethernet cable to my airport extreme to extend both my wifi network and connected devices.
Thanks,
Steven

Download the fing app on an iOS device

Similar Messages

  • HT3728 How do I do a factory reset on a 6th gen Airport Extreme base station (model A1521)?

    How do I do a factory reset on a 6th gen Airport Extreme base station (model A1521)?

    Please check page 18 in your owner's Setup Guide.
    AirPort Extreme 802.11ac - Setup GuideJun 11, 2013 - 2 MB

  • HT3728 How is the "soft reset" performed on a 2nd Gen. AirPort Extreme?

    I put the admin password in such a secure place I can't find it.  I need to add NIC ID for my new MacMini server.

    Connect the AirPort Base Station or Time Capsule to power and wait for  it to complete its start up process. To learn more about the start up  process, please see All about Wi-Fi Base Station Status Lights (LED).
    Press and hold the reset button with a pen or pencil for 1 full second, then release it. The light (LED) will begin flashing amber, indicating that the AirPort Base Station or Time Capsule is in soft reset mode.
    From the AirPort menu bar item, choose the network created by the AirPort Base Station or Time Capsule (the network name does not change).
    Open AirPort Utility in Applications > Utilities on a Mac using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows.
    Select the AirPort Base Station or Time Capsule and click Continue.
    A window indicating that the device has been reset will appear.
    Select "Restore the previous settings" and select OK.
    Move through subsequent windows to make changes to your passwords or other settings as desired, clicking Continue after each one.
    When you have moved through all of the selection windows you will be able to select Update. Click Update to install the new settings.
    Click Continue to allow your AirPort Base Station or Time Capsule to restart.
    Quit AirPort Utility.
    From Apple Support.
    The reset button is located on the back of the device.

  • How to retrive ip address of connected device in shell script or applescript

    Hi all,
    From Mac PC, how to get ip address of connected device in shell script or applescript.
    there is any way to launch an app on ipad in shell script or applescript.
    thank you in advance for your help
    Mickael

    Hi all,
    From Mac PC, how to get ip address of connected device in shell script or applescript.
    there is any way to launch an app on ipad in shell script or applescript.
    thank you in advance for your help
    Mickael

  • How do I see an external HD connected to my AE ?

    How do I see an external HD connected to my AExtreme. My AE is working flawlessly with my Apple and non-Apple devices.  The HD is formatted with NTSB so both Apple and PC can access the files.  The USB HD works fine with direct USB connection. I use AP Utility 5.6 to configure.  The HD is clearly registering as it is on the AirportExpress Utility Disk pane.  I just cannot see it on my desktop or in the finder.  I do have the home network protected with WPA and the HD has a password (which I don't know where to enter in the Utility.  Thanks in advance

    Any replies to this one? Anyone????

  • How to add a port for a IP cam in the airport extreme setting? thx!

    I has buy a IP cam, but I don't know how to add a port for a IP cam in the airport extreme setting? (I can see the IP cam in local, but not the internet.) Many Thanks!

    atwoodjordan, Welcome to the discussion area!
    See Steve Newstrum's user tip "How do I use Port Mapping (Part I)". When it talks about giving your Mac a static IP address just substitute camera instead.

  • How can I set up a WD My Cloud with my Airport Extreme - I can't get it to open ports 80 and 443?

    For remote internet access to the WD My Cloud Mirror, I have been advised that ports 80 and 443 must be open in order to reach the WDMyCloudMirror.  My Motorola Gateway (Surfboard SB6141) is connected directly to my Airport Extreme (WAN port) which is in turn connected to the WDMyCloudMirror (all by ethernet cables).  I do not have FULL instructions on how to properly manually configure the Airport Extreme to open the ports.  I have tried an earlier posting which provides many of the steps, but not all of the required information is included (how to determinge the IP address to be assigned, etc.).  I did the best I could with the information given, but the test using "YouGetSignal" showed the ports as still closed and attemps to reach the WDMyCloudMirror by the internet failed as well (of course).  The WDMyCloudMirror has enough Apple "stuff" included in it (software, I suspect) that an Apple legal acceptance is required for its set-up, yet Western Digital Tecnical Support is unable (or unwilling?) to help with this aspect of its configuration required to work within the Airport Extreme environment.  I have returned the WD My Cloud Mirror to Amazon as "not able to work", but I have not given up the hope that I can eventually get the ports open so that I can get this cloud device, or one similar, to permit remote internet access.

    Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
    It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
    Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
    In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
    But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

  • How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

    How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
    I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder.  I would like to be able to keyboard navigate to it in an efficient manner.  I tried to use the "Go to the folder" feature but was unable to.
    I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
    I hope I explained the question well.  Thank you for all of your help and time in tending to my inquiry.

    Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

  • SG200-08 Loosing MAC addresses of connected devices

    I have a SG200-08 Switch that has in the last month been acting up with certain types of traffic.  On June 7, 2013 I installed the 1.0.6.2 firmware upgrading from 1.0.5.1.  Updating the firmware has not helped. 
    Last week Tuesday a server that was connected to that switch disappeared from the network, looking at the trouble I had to reboot the server and traffic began to flow.  After rebooting the server I found only 1 of 2 MAC addresses from the 1 NIC showing up on the port.
    Today I have a Xerox Workcenter connected to the switch on another port and while working on changing settings on the device I stopping being able to reach the device, could not even ping it.  I went into the switch port showed active, but no MAC address found in the dynamic table for that port. After rebooting the switch I could reach the Xerox again.
    I rebooted the switch on Friday near the end of the day and it was doing better till this morning, all MAC addresses for connected devices were showing up OK.  Is the device defective?  It had been working OK previously, it is connected to another switch on port 1, and that shows a proper table of dynamic MAC addresses.  In both cases of loosing a device it was being used not dormant or in any kind of low power mode.

    Dear Michael,
    Thank you for reaching Small Business Support Community.
    Based on the symptoms; SG200 working fine before, it seems to work ok after reboot, and latest firmware already installed.  It seems to me like a hardware failure but still, in order to confirm, it would be a good idea to restore to factory conditions and configure it manually again.  Just in case that does not help I suggest you to contact the Small Business Support Center for further assistance;
    https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
    Please let me know if there is anything I can assist you with in the meantime.
    Kind regards,
    Jeffrey Rodriguez S. .:|:.:|:.
    Cisco Customer Support Engineer
    *Please rate the Post so other will know when an answer has been found.

  • How do I get my dsl from century link modem to airport extreme?

    How do I get my dsl from century link modem to airport extreme?

    The WAN port on the AEBS is typically labeled as such or it has what looks like a circle of dots above the Ethernet port. You can download AirPort Extreme 802.11n (5th Generation) - Setup Guide.

  • How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    Thanks for the additional information.
    Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
    Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
    If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
    If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

  • What is the default ip address for the Time Capsule and Airport Extreme?

    What is the default ip address for the Time Capsule and Airport Extreme?

    Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.

  • How do I see email address (LearnerID) in Quiz Results Analyzer

    Useing Captivate 5.5
    Reporting Quiz results to a local server.
    Q: How can I see the "LearnerID" (students email address) in the Captivate Quiz Results Analyzer?
    When the student clicks on "Post Results" and enters their name and email address in the pop-up window the email address is collected. You can see the email address (LearnerID) in the resulting XML file that's saved in the CaptivateResults folder.
    Problem is I can't see the email address in the Analyzer, and don't see an option to include it. How can I see the "LearnerID" or the students email address in the Captivate Quiz Results Analyzer? From here I want to export a CSV file.

    Thanks for your response. The quiz results analyzer is awesome, but without the display of email addresses it is not a total solution.
    I'm using an internal server and what I found out is that the .xml file that Captivate creates in the CaptivateResults folder (that Captivate also creates) contains the email addresses.
    So, rather than use the analyzer, I will have to figure out the best way to view email addresses from the xml file. If anyone has a solution that you are happy with, please let me know.

  • How can I see the address bar which is buried above the top of the page?

    I cannot see the address bar that is buried at the top of the page. My cursor will not go up above the top and will not force the page to come down. I have tried un-installing and re-installing, no help. I cannot use the site because I cannot get to the address bar.
    What can I do?

    you've probably also hit the F11 key before - it just toggles between full-screen and normal mode.

  • HT1420 How can I see the list of authorized devices?

    I recently had problems with my computer and in the middle of that, it said that iTunes was no longer working. I uninstalled it and then later reinstalled it once I figured out what was wrong with my computer. Now when I opened iTunes under the same username, it is not showing my songs. It is also saying that I have to authorize the computer yet says I am at my limit of 5. How can I see the list of devices so that I can edit it?

    There's none accessible from your end. If needed, use the Deauthorize All function.
    (90595)

Maybe you are looking for