HT4356 AirPrint Support in the Printer Side (Request for Official Procedure/Steps)
*I selected the iPhone community (but this is for Apple's AirPrint Support in general)
We are currently considering to add support for AirPrint
in our printer-side development.
Does anyone know how can receive official information from Apple regarding
the required procedure/steps to correctly support
AirPrint in the printer side?
We are expecting that such steps would also contain details
on how our printers can become listed later on
in the following Apple page containing the official AirPrint printers:
http://support.apple.com/kb/HT4356
We understand that Apple may need to conduct
some conformance tests in order to consider
that our printer has already officially supported AirPrint,
so we may need to consider such also in our schedule.
Aliel2-
The round button at the bottom of the iPad's front is your Home button. The Sleep button is on the top edge near the right corner.
Normally the Sleep button just puts the iPad to sleep but does not acgtually turn it off. If you used the "Slide to power off" arrow and turned it off, you will need to hold the Sleep button for several seconds until the Apple logo appears, in order to turn the iPad back on.
I wonder if you did the reset the right way, but just did not hold both buttons long enough for the Apple logo to appear? I just tried it on my iPad 2, and it took 17 seconds before the Apple logo appeared. It took another couple of minutes for it to restart to the "slide to unlock" screen.
Fred
Similar Messages
-
AirPrint Support (Request for Official Procedure/Steps)
*I selected the iPad community as category (but this is for Apple's AirPrint Support in general)
We are currently considering to add support for AirPrint in our printer-side development.
Does anyone know how can receive official information from Apple regarding
the required procedure/steps to correctly support AirPrint in the printer side?
We are expecting that such steps would also contain details
on how our printers can become listed later on
in the following Apple page containing the official AirPrint printers:
http://support.apple.com/kb/HT4356
We understand that Apple may need to conduct
some conformance tests in order to consider
that our printer has already officially supported AirPrint,
so we may need to consider such also in our schedule.
Any information will be helpful.
Thanks!arch is growing that fast, it is hard to keep an overview. but as long as i, as an "afternoon linux user", can get any information, it is fine with me.
-
After joining / supporting Mozilla the "print my card" button sends me to a blank tab. Mac 10.6.7 Ff 4.0.1
The 10.6.3 Snow Leopard retail disk Apple sells on their online store will work to restore your software and is needed to fix your machine.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Once you get it, backup then follow this list of fixes.
Most commonly used backup methods
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
Attribute "Report Layout" is missing in the "Print Attributes" tab for IR
Hallo,
The attribute “Report Layout” is missing in the “Print Attributes” tab for an interactive report?
How to alter the report layout (xsl-fo) of an interactive report?
Has someone any idea where to configure this?
Btw, for the "classic" SQL Report the XSL-FO "Report Layout" can be cahnged in "Print Attributes" and this works fine for me. But I want to change the xsl-fo for the interactive report.
"If you do not select a report layout, a default XSL-FO layout is used. The default XSL-FO layout is always used for rendering Interactive Report regions. ... Unlike classic reports, the Interactive Report Print Attributes can only utilize the default XSL-FO layout and is initiated from the Report Attributes, Download section rather than directly from this screen. Once configured, these attributes only apply only to the current region and cannot be used outside the context of the region."
http://apex.oracle.com/i/doc/bldapp_rpt_print.htm
How can the "default XSL-FO layout" be changed?
Changing is necessary because the Apache FOP 1.0 reports the following error (for the transmitted default XSL-FO):
"fo:simple-page-master", "fo:region-body" must be declared before "fo:region-before"
http://www.w3.org/TR/xsl/#fo_region-before
The default report layout is not saved in:
select * from APEX_040000.WWV_FLOW_REPORT_LAYOUTS
Thx, WilliI've found two workaround for getting Apache FOP 1.0 to work with Oracle Apex 4.0 for PDF printing of interactive reports:
1, Use an application process to set your custom layout for interactive reports:
[ ] grant all on APEX_040000.WWV_RENDER_REPORT3 to {YOUR_SCHEMA_NAME};
[ ] Create an Application Process e.g. "Custom Report Layout" with constraint for request 'PDF' and Process Text:
declare
v_xsl varchar2(32767);
begin
v_xsl := '<?xml version = ''1.0'' encoding = ''utf-8''?>
<xsl:stylesheet version="2.0"
<fo:region-body region-name="region-body" margin-top="54.0pt" margin-bottom="54.0pt"/>
<fo:region-before region-name="region-header" extent="54.0pt"/>
</xsl:stylesheet>';
APEX_040000.WWV_RENDER_REPORT3.g_prn_template := v_xsl;
end;2, If you have some knowlege in Java change the sequnce of the the nodes in the apex_fop.jsp (or servlet), ie. changing the xsl before you use it for transformation.
The code depends on the solution you are using to parse the xsl string.
Hope this may help someone,
Willi -
I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to
it is a windows 8
-
Hi All,
I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
FROM (SELECT CASE Isnumeric(
accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
WHEN 1 THEN Cast(
fact_highweedsandgrassdetails.vendorinvoiceamount AS
VARCHAR(
10))
END AS
Total_Dollar_Amount,
fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township AS
CaseTownship,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag AS
CaseReferredToLegalFlag,
fact_casedetails.macinitiatedflag AS
CaseMACInitiatedFlag,
fact_casedetails.conversionstatusdesc AS
CaseConversionStatusDesc,
fact_casedetails.assignedstaff AS
CaseAssignedStaff,
fact_casedetails.completedstaff AS
CaseCompletedStaff,
fact_casedetails.closedbystaff AS
CaseClosedByStaff,
fact_casedetails.initiator AS
CaseInitiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
DECIMAL(6, 2))
AS
DaysOpen,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursOpenToMow,
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursAssignedToMow,
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END AS
NumberComplete,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate IS
NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate
<=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHoursOLD,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHours,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
Assigned_Department_Staff,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
'HWG', 0)
, '-', 0)) AS compliancejoin,
fact_highweedsandgrassdetails.maccomments AS Expr1,
dbo.dim_highweedscensustracts.b1_census_tract
FROM dbo.fact_highweedsandgrassdetails
INNER JOIN dbo.fact_casedetails
ON fact_highweedsandgrassdetails.casenumber =
fact_casedetails.casenumber
INNER JOIN dbo.dim_highweedscensustracts
ON fact_highweedsandgrassdetails.casenumber =
dbo.dim_highweedscensustracts.casenumber
GROUP BY fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag,
fact_casedetails.macinitiatedflag,
fact_casedetails.conversionstatusdesc,
fact_casedetails.assignedstaff,
fact_casedetails.completedstaff,
fact_casedetails.closedbystaff,
fact_casedetails.initiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
fact_highweedsandgrassdetails.vendormoweddatetime,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate
IS NOT NULL
AND
fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE
fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)),
Cast(Datediff(ss,
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN
( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(18, 2)) * 60,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]'),
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(
Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
, '-', 0)),
fact_highweedsandgrassdetails.maccomments,
dbo.dim_highweedscensustracts.b1_census_tract) AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
ASC
SVI just counted the columns from the top:
1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
might be staring on the wrong column.
Erland Sommarskog, SQL Server MVP, [email protected] -
Hi All,
I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
FROM (SELECT CASE Isnumeric(
accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
WHEN 1 THEN Cast(
fact_highweedsandgrassdetails.vendorinvoiceamount AS
VARCHAR(
10))
END AS
Total_Dollar_Amount,
fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township AS
CaseTownship,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag AS
CaseReferredToLegalFlag,
fact_casedetails.macinitiatedflag AS
CaseMACInitiatedFlag,
fact_casedetails.conversionstatusdesc AS
CaseConversionStatusDesc,
fact_casedetails.assignedstaff AS
CaseAssignedStaff,
fact_casedetails.completedstaff AS
CaseCompletedStaff,
fact_casedetails.closedbystaff AS
CaseClosedByStaff,
fact_casedetails.initiator AS
CaseInitiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
DECIMAL(6, 2))
AS
DaysOpen,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursOpenToMow,
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursAssignedToMow,
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END AS
NumberComplete,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate IS
NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate
<=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHoursOLD,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHours,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
Assigned_Department_Staff,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
'HWG', 0)
, '-', 0)) AS compliancejoin,
fact_highweedsandgrassdetails.maccomments AS Expr1,
dbo.dim_highweedscensustracts.b1_census_tract
FROM dbo.fact_highweedsandgrassdetails
INNER JOIN dbo.fact_casedetails
ON fact_highweedsandgrassdetails.casenumber =
fact_casedetails.casenumber
INNER JOIN dbo.dim_highweedscensustracts
ON fact_highweedsandgrassdetails.casenumber =
dbo.dim_highweedscensustracts.casenumber
GROUP BY fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag,
fact_casedetails.macinitiatedflag,
fact_casedetails.conversionstatusdesc,
fact_casedetails.assignedstaff,
fact_casedetails.completedstaff,
fact_casedetails.closedbystaff,
fact_casedetails.initiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
fact_highweedsandgrassdetails.vendormoweddatetime,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate
IS NOT NULL
AND
fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE
fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)),
Cast(Datediff(ss,
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN
( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(18, 2)) * 60,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]'),
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(
Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
, '-', 0)),
fact_highweedsandgrassdetails.maccomments,
dbo.dim_highweedscensustracts.b1_census_tract) AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
ASC
SVI just counted the columns from the top:
1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
might be staring on the wrong column.
Erland Sommarskog, SQL Server MVP, [email protected] -
FM/BAPI for creating the credit memo request for Vendor
Hi Experts,
I need an RFC/BAPI, for creating the credit memo request for Vendor.
Thanks in Advance,
Kiruba.RHi,
Use this BAPI 'BAPI_DRMCREDITMEMOREQ_CREATE' - Credit Memo Request Creation
Regards,
Jyothi CH. -
The same travel request for many employee
Dear colleagues!
Our HR specialist want to enter the travel request for many employee/workers in one screen.
Or quickly copy the one trip request for many employees.
for example - 50 people trips with same attributes - at one time,at one destination etc.
What the variants may be use ?
Thanks in advanceHi,
PR02 and FITE_EXPRESS_EXPENSES will allow for several TRIPS created at once for ONE Pernr, this is what Sally mentioned.
http://help.sap.com/erp2005_ehp_04/helpdata/en/85/2a39eeef494c64aa8e8fa14816206e/content.htm
However, Siegfried is right in my opinion, as per your original requirement to create several trips at once for DIFFERENT Pernr is not provided by SAP.
Cheers, Lukas -
Need scanner App for Dock. I have Maverick 10.9.5 and Epson Perfection V500 photo. My present app 3.7.1 won't work. Otherwise I have to go into System Preferences every time I scan to Select to switch from the Printer. Thanks for help.
You might give VueScan a try. It should work with your scanner. There's a demo version that you can use initially.
-
I am trying to install a printer Epson xp-605 but when i try to add it, Apple says it can't find the software. I have downloaded the software from Apple website and also from the Epson installation disc! The message is: "The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
Try a reset of the printing system. This often resolves the symptom you are experiencing.
-
The AirPrint from ipad2 to hp printer was working fine. All of a sudden the function no longer works! The ipad2 recognises the printer and even sends the print command. The printer centre say 'printing' but it remains syptuck in that position and no printing occurs. I've reset the wireless connections and deleted printing queues and reset the printter to original settings. The printer is found but nothing happens! Can anyone help out?
ccrobin I’m sorry your having this much trouble with this printer . Hopefully this step will fix your problem try a partial reset.
Ccrobin have you tried to connect a USB cord to the printer directly to the computer to see if it has the same issue?
{edited for non standard info} -
Can someone help me to print with Air-print and my new Epson 3640 they connect but the printer always claims a paper jamb that does not exist. Epson claims it is an apple settings issue and that the their printer is fully compatible with Air-print. Any suggestions?
Update: After working correctly for about 10 minutes, Airprint stopped working again. And then it started working again. So there's some kind of intermittent connection problem.
-
How to print Spool requests for cheque printing sequentially
Dear All,
I am making vendor payments and printing cheques using F-58. It automatically creates a spool requests at the end of the transaction. When i complete all my payments and go to SP01 for viewing spool requests, the last request appears at the top of the list.
If i select 3 consecutive requests and print them at a time, the last request gets printed first on the first cheque number and the first request gets printed on the last cheque number.
This results in anomaly in the cheque number assigned in the system and the printed cheque as the last payment is printed on the first cheque.
I am using dot matrix printer with page format fixed for cheque specifications. The cheques are printed properly as per the format except the order of printing.
Kindly let me know how to print multiple requests sequentially from the spool requests list such that the spool request number printed matches with the serial cheque numbers.
Regards,
SAP_2009Hi,
I understod your issue.
Whenever you posted multiple payment documents, and after that if you want to take cheque printouts sequentially by using more spool requests.........there is a way to sort out this issue.
1) Select all of your spool requests and click on Sort in ascending Order (CtrlShiftF5) and click on Print directly (CtrlShiftF8). By doing this you will get the cheque printouts sequentially according to your payment document sequence.
Hope this will help you
Assign ********, if it solved your problem.
Thanks,
Srinu -
How do you change the default size of the print batch size for mail merge in Publisher 2010?
I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.
Maybe you are looking for
-
We have two Physical Windows 2012 R2 Storage Edition configured as DFS. Server B is read only and nobody can access it, all the clients conntect to server A. On both server we have activated VSS We have 6 TB of shared data on the server. One share is
-
Sampeling a colour from a photo places in Illy CS4
Hoping this is a simple one to figure out. In CS3 I would drop a photo into the document and then using the eyedropper I would just sample colours from the photo. CS4 wont sample full stop - pulling my hair out and grinding to a halt on the whole wor
-
Calendar Invitations Not Showing in "Inbox"
Hello Everyone, I'm trying to get my iCloud Calendar to work on my iPhone 5 with iOS8. You'd think this would be pretty straightforward, but apparently not! This worked great when my wife and I were both using Exchange hosted email accounts from our
-
Web Dynpro ALV Lead Selection following filter
Hi, How/Where can I set the lead selection on my ALV grid following the filter? Thanks Samir
-
Java(TM) Platform SE binary doesn't work on any website, on any browser
I'm on Windows 7 Ultimate 32bit, everything's working fine, I always keep my system clean, I also keep the registry as clean as possible, I have a problem from at least a couple of months, so "Java(TM) Platform SE binary" doesn't work on any website,