HT4366 We do not have a port to the TV. Is there a way to pug it into the cable box? The cable box has a Hdmi port
We just purchased the Apple TV 2 and our TV doesn't have Hdmi port, but out cable box does. Can we hook it up to the cable box?
Is so, how we keep trying and nothing is happening
You can't connect the Apple TV to the cable box either using HDMI or something else. The Apple TV is for use with HDMI only, although some users have found workarounds which may or may not work for you.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)
Similar Messages
-
I have firefox installed on two computers. The desktop does not show the split screen, but the laptop does. I have checked the posts and I do not have fox splitter add-on but still get the split screen when I click on a second site.
Right-click that bookmark and select '''Properties''', then un-check the preference for '''Load this bookmark in the sidebar''', and then click Save.
Using JavaScript buttons on web pages for "Bookmark this Page" causes that preference to be selected when saving the bookmark in that manner. So, don't use those buttons, use the "Bookmark this Page" feature that is built into Firefox instead. -
I have lost my Iphone last week. I know this has been a while, but I am desperate. I have talked to At&t and there is no way they could track my phone with it turned off. So I was wondering if there's any way that we can check the last location of the phone before it died? And also, if there's any way we can ping the phone in case it was stolen and was turned on? I hope to read ur responses soon. Thank you.
If you did not setup Find My Phone, I'm afraid yo're out of luck. There is no practical way to track your phone.
-
I have lost my iPad or someone may have it. It is locked but find my iPad is not enabled. It doesnt have a sim. Can the find be set remotely? Or can it be found from the oriniak registration?
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
hi, i have a late 2008 15 inch macbook pro, which have a mini display port.
I noticed that thunderbolt and mini display port looks a like. So, my question is :
can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.
thank youken94538,
no, you’d need a Thunderbolt-to-FireWire adapter or Thunderbolt-to-USB adapter to be able to access your Thunderbolt hard drive from your 2008 MacBook Pro. -
Hi I want to back up my photos from my iPhone 5. How can I do this? I have an iPad mini but cannot sync to an iPhone as iPad does not have USB port. Can you help please
You have to back them up to a computer. You would import them either to iPhoto or to the Photos app in your PC:
http://support.apple.com/kb/ht4083
Cheers,
GB -
Hello All,
Sometime users are getting below error message on the IM windows when they having P2P IM Chat.
"This message may not have been delivered to User Name because there
was no response from the server."
I can see below error on the Lync 2013 Monitoring page.Hi,
Please make sure all required ports have been allowed. You can verify that all ports are open can accepting connections using telnet.
Telnet from External Client:
Test to SIP.domain.com 443/SIP
Test to WebConf.domain.com 443/PSOM
Test to AV.domain.com 443/STUN
Telnet from Lync 2013 Edge:
Telnet to Pool.domain.com 5061/SIP
Telnet from Lync 2013 Pool:
Telnet to LyncEdge.domain.com 5061
Telnet to LyncEdge.domain.com 443
Telnet to LyncEdge.domain.com 5062
Telnet to LyncEdge.domain.com 4443
Telnet to LyncEdge.domain.com 8057
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
A few days ago I bought a season of the series Psych off of iTunes. I was able to watch the first bunch without a problem but now all of a sudden when I try to watch one it says "You do not have permission to access the requested resource". I tried restarting my phone but that do not help. I cleared up a lot of space on my phone as well. I have and iPhone 4 with the update of iOS 6.1.3.
Are you using the same Apple ID that the purchase was linked to? I had this issue with a shared device, and the other person had logged out of my ID and logged in with hers.
If it's the same ID, then try redownloading the purchase. -
I have had this issue with my Macbook Pro ever since I bought it in November. If I start downloading a file with Safari, and the download gets interrupted, I am unable to resume downloading from the point where it was interrupted. Clicking on "resume downloading" button in the downloads list works fine it I do it immediately after the download is interrupted, but if a little time has elapsed (as little as a few minutes) since the interruption it will not let me resume the download, and I get the message in the downloads list "You do not have permission to access the requested resource." I have repaired my permissions...I don't know what else to do. Here's my system configuration:
Macbook Pro Mid-2012 Retina Display
2.3 GHz Intel Core i7
8 GB RAM
System 10.8.2
I just have to editorialize for a moment: My old Macbook Pro and my Mac Pro both worked great with Snow Leopard, but since upgrading the Mac Pro to Mountain Lion and buying the new Macbook I have had all kinds of issues like this. Tech support at Panic software, that I contacted because of issues with some of their software, told me that I was only one of many with Mountain Lion issues, but here we're over half a year since the release of 10.8 and we're only on system 10.8.2. Is anybody at Apple actually trying to fix the issues?
Thanks for anything you can tell me!If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback -
IPhoto Library locked in Yosemite; You do not have permission to open the document "iPhoto Library"
Long story to get to the iPhoto part but may help someone who is in-the-know about what can be done for me...
I turned on my computer a few weeks ago (iMac 27" late 2012, 2.9GHz Intel core i5) to access some photos in iPhoto and it would not load to the home screen but gave me the Disc Utilities Menu. From memory the options I had were; (1) Restore from Time Machine Back-up, (2) Re-install OSX, (3) Get online Help, (4) Repair or Erase using Disc Utility.
I tried Repair in option 4... no success.
I tried option 1 as I have my internal HDD backed up to an external HDD via Time Machine in case anything goes wrong... no success.
I tried option 2 (which was Mavericks) and it loaded and took me to my desktop.
When I tried to opened the iPhoto app in the dock there were no photos in it.
After searching forums and the internet they suggested it may have been an iPhoto upgrade issue so I tried to update iPhoto but found it was already up-to-date.
After looking, I found that the "iPhoto Library" in "Pictures" had a red circle with the white dash through it and was locked. When the "iPhoto Library" folder was double clicked I got the message "You do not have permission to open the document “iPhoto Library”.
In all the trouble I have upgraded to Yosemite 10.10.3 (with Photos 1.0) and am obviously still having the same warning/error message come up when the iPhoto Library folder is clicked.
Right click won't allow me to view package contents.
The "Import" function in the "Photos" app won't do anything with the folder, and the "iPhoto Library" folder looks and functions the same in all of the back-ups on my external HDD Time Machine.
I don't care if I need to use "Photos" or "iPhoto" but I do need to get the photos out because they are irreplaceable. If had know this problem was possible (especially while using Time Machine) I would have manually stored and backed my photos up in folders on another external HDD.
Any help would be greatly appreciated, feel free to ask any additional Questions (but this is the first time I have posted in the forum so hopefully I can work out what is going on if you do reply to this post )
Cheers.Thanks for the suggestion. I had tried this earlier with no success either. Even with the padlock unlocked I can't even change the tab that says "OPEN WITH". I still get the... "You do not have permission to open the document “iPhoto Library” message. You may also it continues to say "Fetching" where it should say my user name at the bottom.
-
You do not have permission to view the System Landscape Directory.
Hello there,
When I accessed my SLD from portal, it took me to the page but kept saying:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I searched on these forums for the above error. Got some results, but nothing really substantial that has helped/fixed my problem.
I also read a bit on SLD from the pdf file named: System Landscape
Directory of SAP NetWeaver 2004s
I also worked on the security roles and actions to individual
users or user groups like for ex: the above pdf file advised I map the security roles from Visual Administrator, to the created roles in the portal. I've done that too. Like create a user group: 'SAP_SLD_ADMINISTRATOR' and create a user role corresponding to it, which would be: 'LcrAdministrator'
Then, I went to visual administrator, and clicked on 'Assign User Groups to Roles'
Even after this, I tried to access the SLD from portal: It is still giving me the same error I mentioned above in bold italics.
Can somebody please help me how to fix this issue?
Thanks
Dino.Graham:
Thank you very much for making the effort to reply to my query.
But, it still hasnt solved my problem yet.. for some reason even though I followed your instructions and did what you advised.
I have attached a screenshot of my Visual Administrator screen that you advised me to modify/change.
Here it is: http://img166.imageshack.us/img166/2259/screenshot002co1.jpg
After I made the changes, I restarted the J2EE server and went to my portal SLD page: [http://org-x:50000/sld]
Tried authenticating usernames: LcrAdministrator and Administrator.
Both attempts resulted in the same error show below:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I am wondering, if you would have another workaround regarding this issue, can you please let me know?
Thanks
Dino. -
How to find a customer who does not have any activity in the last 5 years
HI all,
How to find a customer who does not have any activity in the last 5 years.
Thanks & Regards,
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Jan 3, 2011 2:20 PMPost Author: tzinser
CA Forum: Formula
Okay, I left off a lot of important information...
I'm using two tables
TWDATA
EVENT
From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
The two tables are linked by OrderNumber. -
My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?
If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff .... WILL THIS FIREFOX ERROR SOON BE FIXED ?
Don't know what more to ask. I looked at the known problems and couldn't make any sense of the answersUpgrade your browser to Firefox 8 and check
* getfirefox.com
Maybe you are looking for
-
Beige G3 with Pro Tools Freezes Every Time I Use PT (why I have the G3)
Please, if anyone can help.... I GOT my beige G3 running which had died and refused to reboot when last I had tried running Pro Tools. I GOT Pro Tools 6.1 reinstalled and running... and then when I was back in Pro Tools again on my newly-running syst
-
Why can't I see the layers of cs4 .psd files passed to me in photoshop elements 11?
why can't I see the layers from cs4 .psd files passed to me in photoshop elements 11?
-
Does anyone know if and when SAP is going to stop supplying support for the 5.2 version of the GRC software? Thanks! Elizabeth
-
Installing/updating software always generates error message
Every time I update or install software I receive the error message "software failed to install." As soon as I click the message to close it, another message pops up telling me that the software did install. This has been going on for several months
-
I'm trying out WL6.0 (eval version) LDAP realm support and having trouble getting it to work - basic auth just keeps popping the window up 3 times and then giving up. Only pertinent message in the log is: ####<Mar 16, 2001 12:03:21 PM EST> <Info> <Se