HT4482 Dear Support team, after my system crashed, I've lost Ilife aplications, and couldn't find it in my account in Appstore.

Deaar Support team, after my system crashed,and were restored, I've lost Ilife aplications, and couldn't find it in my account in Appstore.
Pls. advice
Thanks

OS X Recovery -
http://support.apple.com/kb/HT4718

Similar Messages

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • HT1918 Dear Support team, I would like to change my account region into another zone, but my balance of account  is Usd 0.22. Please kindly reset it into zero so that I can proceed. Thank you.

    Dear Support team, I would like to change my account region into another zone, but my balance of account  is Usd 0.22. Please kindly reset it into zero so that I can proceed. Thank you.

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple. You can try contacting iTunes Support via this page and ask them if they can remove the balance so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How to Re-activate my lightroom license after a system crash ?

    Hi My computer crashed and I was forced to reformat my drives. How can I register my License as it is still active.  This prevents me from using Lightroom

    Hi Keith
    A short desciption of my problem
    History
            Installed Lightroom on my Zbook and activated my serial number
            Windows crashed and reciovery failed
            Format harddrive & re-install windows
            Downloaded Lightroom via free abode cloud interface (Dec/Jan)
            Could use lightroom  until February
            Lightroom develop is inactivated ( I can see all my pictures in the Library mode)
            When I punch in my serial nr for lightroom I get the message that it is already active
    I presume that the issue is that it seems that I am trying to active my license again ?
    Best regards
    Berne
    Från: Keith_Reeder 
    Skickat: den 12 mars 2015 14:18
    Till: Berne Parborg
    Ämne:  How to Re-activate my lightroom license after a system crash ?
    How to Re-activate my lightroom license after a system crash ?
    created by Keith_Reeder <https://forums.adobe.com/people/Keith_Reeder>  in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/7282701#7282701>

  • HT4642 Dear Support team,   There are any way to open Microsoft Excel - Office by using CSV format

    Dear Support team,
    There are any way to open Microsoft Excel - Office by using CSV format
    best regards

    For the record, this is a user-to-user support forum. You aren't actually addressing Apple.
    I'm not clear what you are trying to do, but Numbers will open a CVS file adn will export to CVS (as well as Page, Numbers, and PDF) using the document function (looks like a box with an arrow; upper left). If this isn't what you are looking for, perhaps you could provide a bit more detail.

  • HT201363 Dear support team, my security is not avalable now ! how can i change it similar to my email accout?

    Dear support team, my security is not avalable now ! how can i change it similar to my email accout?

    If the old ID ("email address") is your ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Dear support team, I would like u to help us about iPad

    Dear support team, I would like u to help us about iPad Model A1430 iPad (3rd generation) Wi-fi+Cellular
    I bought from store and when start the begin pop-up is lock to other iCloud user. I don't know their password and cannot reset every thing to access my own ID. Could u pls. help.
    Best Regards,
    Grace
    <Email Edited by Host>

    Please don't put your personal information here. No one from Apple monitors these questions, so you get user-to-user assistance only.
    Unfortunately, your iPad is locked to another account. Unless the original party provides you with the password, then you will not be able to unlock the iPad. Apple will not provide you with the password, that is their rules. Either you return the iPad or find the original owner who probably won't give you the password either, but you can ask.

  • I just purchased a MacBookPro after having a MacBook.  I have ILife, IWorks and Office for Mac.  How do I get those programs on to my MacBook Pro?  I will still use my MacBook at work so I need those programs to remain on it as well.

    I just purchased a MacBookPro after having a MacBook.  I have ILife, IWorks and Office for Mac.  How do I get those programs on to my MacBook Pro?  I will still use my MacBook at work so I need those programs to remain on it as well.

    You need a Firewire cable to run between the two Macs.  Using Utility>Migration Assistant running on your new MacBook Pro, transfer what you want (with all the preferences and such) from your MacBook to your MBP.  Here's more info from Apple.
    You might have an issue with the Serial number for Office, but hopefully you have that around.
    Hope this helps.

  • After duplicating LAYER, I go to EDIT    FILL LAYER and can't find NORMAL mode  Elements 9

    after duplicating LAYER, I go to EDIT    FILL LAYER and can't find NORMAL mode

    I go to the menu and NORMAL does not appear
    Date: Mon, 14 Jan 2013 10:28:01 -0700
    From: [email protected]
    To: [email protected]
    Subject: after duplicating LAYER, I go to EDIT    FILL LAYER and can't find NORMAL mode  Elements 9
        Re: after duplicating LAYER, I go to EDIT    FILL LAYER and can't find NORMAL mode  Elements 9
        created by 99jon in Photoshop Elements - View the full discussion
      Try from the layers pallet after highlighting your background copy layer. You should have dropdown menus for blend modes and opacity.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4992506#4992506
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4992506#4992506
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4992506#4992506. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How do I get Thunderbird to allow me to choose SMTP than IMAP when reinstalling after a system crash?

    I had a system crash in Jan. After the crash recovery (Windows had written over parts of the disc but recovered most things; however, they were set to states as if they had just been installed), Thunderbird did something I was unhappy with & I reinstalled it. When I did, it did not allow me to select IPOP or IMAP but came up with IMAP, which I had never used before & knew nothing about. However, now having read about IMAP & having used it with Comcast, I dislike it intensely--it's slow & cumbersome & doesn't allow me to save emails with everything permanently attached to them. I haven't had the time to pursue it until now. How can I get back to using IPOP?

    POP and IMAP are the two incoming mail protocols.
    SMTP is the outgoing mail protocol.
    Maybe when Apple invents their own email protocol it will be iPOP like all their other iSomethings
    Here are the instructions for switching Thunderbird from IMAP to POP..
    https://support.mozilla.org/en-US/kb/faq-changing-imap-pop

  • Auto-email Support Team after team determination (new message)

    Hi everyone, I know this topic has been discussed on SDN a lot, but it is still unclear how one gets the auto-email working when a new message arrives in the Service Desk. We are currently on SSM 7.0 EHP1, and I have gone through note SAP Note "1041455 -Partner dependant actions are not executed". So, here is what I have done so far:
    - with note 1041455, I copied the CRM_DNO_PARTNER_1 method to ZCRM_DNO_PARTNER_1 and edited the code as described, then assigned it to the Action Definition SLFN0001_ADVANCED_FIND_PARTNER (I removed the old CRM_DNO_PARTNER_1 method).
    - in SPPFCADM, I used the Action Profile SLFN0001_ADVANCED with Action Definition SLFN0001_ADVANCED_FIND_PARTNER for the Support Team finding, which works. I even set this one to Immediate Processing.
    - then I copied Action Definition SLFN0001_ADVANCED_STATUS to ZSLFN0001_ADVANCED_STATUS and made it Partner Dependent on SLFN0003 (Support Team), Schedule Automatically (and I have tried most of the Action Merging options). Start Condition is "When saving document". Under Processing Types I used the Smart Forms Mail type.
    - Then, under Conditions for the Action Profile SLFN0001_ADVANCED I added the ZSLFN0001_ADVANCED_STATUS action and set the Start Condition to "&CRM Service Process.User Status&  = E0001SLFN0001". So the status should be New.
    Now, whenever I create a Service Message from satellite system, the message gets created, the Support Team is determined but no email is sent to the Support Team. When I open the message and click on Change, then only does the auto-email action list under the Actions tab. Only when I saved the message does it actually send the email.
    So can anyone please help in getting the email sent to the Support Team right after the message gets created and the Support Team gets determined? Your help would be much appreciated!

    Hi Michele,
    At last, i made this one working by changing the action SLFN0001_ADVANCED_FIND_PARTNER to "Immediate Processing". Try to check this standard action, you will see that it was set to "Processing when saving".
    Create a new action profile like Z_SLFN0001_ADVANCED_FIND_PARTNER (copy SLFN0001_ADVANCED_FIND_PARTNER then set to "Immediate Processing") then change the sort order in a way that it is lower than the standard one. Remeber to set also the Condition Configuration (Just copy the condition of standard SLFN0001_ADVANCED_FIND_PARTNER).
    Next, create the action profile that will send the email notification with "Immediate Processing" also. Assign a sort order higher than the number you assigned to Z_SLFN0001_ADVANCED_FIND_PARTNER.
    Try this one. It works on our system.
    Please send back if you have questions.
    Thank you,
    Ice
    Edited by: Maricel Villagra on May 6, 2009 3:17 AM

  • Multiple re-installs, after multiple system crashes

    Hi all,
    I'm getting really good at installing Leopard on this machine, but I'm not enjoying it so much anymore.
    I installed Leopard clean a few days after it released, and used it for a few weeks with no trouble. After a while, an app would crash, then the system would crash. After a re-start or 2, the OS got hosed, and I had to re-install Leopard, and recover with TM.
    I'd been having similar issues in Tiger, so I didn't think much of it. A few days after the first crash, it failed again, so I replaced the hard drive, and recovered with TM.
    Since the new drive a week or so ago, I've re-installed Leopard at least 3 times, and recovered each time with TM. Each time an app crashes, the systems locks up and won't start back up again. Sometimes I can see the drive through another machine, other times not.
    Before I replaced the drive, I put Leopard on my 15" Titanium PowerBook and migrated everything with TM, and it's still going fine.
    Does Time Machine have something on it that keeps me stuck in this cycle? Did I install a bunk drive? Is there some other hardware on this machine that's killing Leopard?
    I'm working on the the problem machine now using a clean install, but I haven't brought anything in from TM yet. I guess I'll just keep working with it to see if it happens again. Verify Disk says everything is ok, Permissions shows a bunch of "Waring: SUID file... will not be repaired" stuff- nothing else.
    Thanks for any ideas.
    Guy
    Message was edited by: guyh

    Hi guys,
    Thanks for your input. Here's an update.
    I ran the machine using only Mail and Safari, and didn't bring in any files from TM from Friday to Monday and didn't have any issues. (I zapped the PRAM during this period.)
    Monday morning, I got greedy and pulled in my entire user folder from TM- I didn't migrate from TM, I just brought in the user folder. Within a few hours, spotlight crashed, then the OS crashed.
    On Tuesday, after writing zeros to the drive, I re-re-installed Leopard, and again, ran Mail and Safari without trouble. Wednesday night I copied folders for Mail, and Address Book (and nothing else) from TM. Then this morning, Safari crashed, then the OS crashed.
    I can't imagine TM backups of Mail and/or AB could kill my OS- but maybe so. TimeMachine has my only backup of my data, so I seem to be stuck with it if for now.
    I have a little G-Tech drive with Tiger that works fine on this 17", so I picked up a FireLite drive this morning, and have it running Leopard now. I'm not sure where to go from here...
    Thanks again for your tips.
    Guy

  • Photoshop Elements lost after a system crash

    I purchased Elements in late 2011 and was using it until recently when my system crashed and I had to reinstall Windows.   Do I need to purchase Elements again or is my serial number from the original purchase still valid if I want to download Elements again and re-install it?
    thanks!
    Simon

    Hi SimonBooth,
    Your serial number from the original purchase is still valid and you can redownload Elements again and use it.
    What version of Photoshop Elements software are you using?
    For Photoshop Elements 10 and 11 you can download from : http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    and for Photoshop Elements 7,8,9 you can download from : http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html
    Regards,
    Rave

  • After a system recovery, I have lost my "links" on the desktop taskbar, can't find it to replace.

    When I originally started using firefox, I found an "add on?" that put "links on my desktop taskbar so I could go directly to that link instead of having to open firefox and then typing it in. I just had to do a full system restore on my computer, and now I'm back up and can't find the add on or extension, or whatever it's called to put it back on my taskbar. HELP PLEASE!

    If, for whatever reason, you are unable to restore your iTunes Library from the external hard drive or backups, you can always contact Apple. I had recently lost my entire iTunes library when the hard drive it was located on crashed. After contacting Apple, they "reauthorized" all my purchased tracks and made them available from the iTunes store.

  • System crash just got a memory upgrade and installed tiger.

    When I was runnig panther and connected to net and at random times I get a message that read " Your computer needs be reset" . The message appears in several different langauges. When I was using Panther i did two clean installs of panther i still got the fore mentioned message. I thought installing tiger would take care of the problem but it didn't. i get the same message and a system crash. Is my mini shot?

    Grizzo, what you're suffering from is known as a 'Kernel Panic'. It's not all that common, but it's not unheard of either. Kernel panics can be caused by a wide variety of things - often by memory problems (hence the previous poster asking whether your memory upgrade was done before or after you first started getting these) but can also be caused by other hardware issues, or even by software.
    One thing that a kernel panic doesn't mean is that your mini is faulty. It MIGHT be, but it's also possible they're being caused by something you have installed on your mini, or a device connected to it.
    First thing to try is to disconnect all external devices other than keyboard, mouse and screen and see if the mini panics then. If it doesn't, the problem is in something you had connected to it before. If it does, then it's in the mini (though some displays have been known to cause kernel panics too!).
    You might find the page at http://www.macmaps.com/kernelpanic.html an interesting place to start.

Maybe you are looking for