HT4528 Hello, My name is Ramondo Frank. I was instructed to upgrade the operating system on my IPhone. I followed the instruction but are unable to get past the terms and services screen

Hello

The issue here is the compression. It is the compression that is causing the slowdowns in FCP, so in order to fix the issue you'll need to use a codec with less compression. By definition a less-compressed codec will take up more space.
ProRes LT is one of the lighter codecs available so it will be difficult to go further without a noticeable loss in quality. But try converting a small clip to ProRes Proxy and see if the quality is acceptable to you.
Another solution would be to use Adobe Premiere CS5 which can edit H.264 natively.

Similar Messages

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

My wireless mouse and KB are in discovery mode, but I can't get past the "enter password" screen because my Mouse and KB will not work...batteries have been changed.

My Wireless KB and mouse are stuck in discovery mode, but I can't get past the "user password" screen because It won't allow me to enter characters.

Should work if you enter the code and hit the return key. Here is a step by step article.
http://support.apple.com/kb/HT1809?viewlocale=en_US
Captfred

New MacBook Pro, unable to get past the select your country screen during initial setup.

I purchased a new MacBook Pro last night and am unable to get past the initial setup screen where you select your country. The mouse will move around, but won't actually allow me to click on 'continue'. I've also tried the keyboard commands to move to the next screen. Nothing...

I just experienced this, and I am recording the solution here for posterity. I got through the setup using the keyboard (tab to move between controls and space to select), thinking that the mouse click would work when I got through it. But I was dismayed to find that it did not ...
... at least so I thought! But actually, you have to push down the mouse pad, NOT just tap it. You can turn on tap-to-click later, but at the start you must push it until it audibly clicks. It is not obvious if you are used to Windows laptop mouse pads like me, where tap-to-click is the ubiquitous norm.

I want to use this phone w/o a verizon account or number, but I can't get past the set-up screen. Can I use this phone to surf there web only and get past setup

I just want to use the phone as a web browser using wireless, I don't have verizon, I can't get past the set-up screen. Can I use the phone without a verizon account?

I took it to Verizon and a counter person got it to work. she said one has to be persistent and eventually the screen goes away that was demanding the phone number I didn't have, it works now I'm happy

HT1498 I've rented a movie but it seems to stick at the download screen. I get the message "ready to play in ...." but it doesn't get past this. I've left my broadband and apple TV on all night but this message is still there.

I've rented a movie but it seems to stick at the download screen. I get the message "ready to play in......" (time stated varies) but it doesn't get past this screen. I've left my broadband and apple TV on all night but this message is still there. Any ideas what I'm doing wrong?

Neerav
The Apple TV streams the movie you rent and loads up enough in its memory to let you watch buffer free and then forgets the movie. You get a rental for 30 days until you start to watch it then you have if for 48 hours.
The only thing you can do is play it when you want to watch it, if there is a problem when you do that contact apple or post again. The Apple TV does not download the movie so if you switch off and resume later it will need to reload but can start from where you left off.
Jules

Hello,I wonder if it's possible to set up another wireless connection for using on airplay. My airplay works but I can't get on the internet while using it.

Hello,I would like to know if this is possible.

Well, first of this isn't making sense. I would fix the problem, instead of just trying to skirt around it, and still end up with the same problem.

HT201210 itunes says that i need to unlock my ipod because it cannot access it but i can not get past the screen on the ipod which says to plug it into itunes? and help plz?

itunes carnt update me ipod?

Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
Above from:
http://support.apple.com/kb/TS3694#error1603

Turning on and the apple chime is heard but won't get past the first grey screen

Turning on the Mac and hearing the chime but not able to get past the initial grey screen.

Hello Daryl,
Also let us know what Operating System you have on your Mac.

Built my first PC, won't get past the first screen :(

Took me 12 hours to do my first build (I know, took too long) and I was so happy at first once everything was done but that didn't last long unfortunately. :( I'm stuck at the first screen where it lists my PC components and it tells me to either press DEL or F11. Nothing works. It's as if my keyboard is not being recognized... which it does because it says "1 KBDs, 1 MICE etc." in that same screen.
Parts are:
* MSI Computer Corp. Motherboard North Bridge AMD 970 & South Bridge AMD SB950 Chipset ATX DDR3 800 AMD AM3+ Motherboards (970A-G46)
* AMD FD6300WMHKBOX FX-6300 6-Core Processor Black Edition
* PNY 8GB Kit (2 x 4GB) 8 Dual Channel Kit DDR3 1866 (PC3 15000) 240-Pin DDR3 SDRAM MD8192KD3-1866-X9
* ASUS HD7790-DC2OC-1GD5 Radeon HD7790 1GB GDDR5 128-bit, DVI-I/DVI-D/ HDMI/DP PCI-Express 3.0 CrossFire ready Graphic Card OC-selected 1075MHz core
* WD Blue 1 TB Desktop Hard Drive: 3.5 Inch, 7200 RPM, SATA 6 Gb/s, 64 MB Cache - WD10EZEX
Every single one of these parts is listed in that first screen where I'm stuck at so that means everything is working, right (i.e., not dead on arrival or I didn't damage anything)? I did a Google search and this guy here (can't post links so the URL is not formatted) ->overclock.net/t/1426196/all-new-custom-pc-wont-get-past-the-bios-setup-screen<- had the same problem as I was and he pretty much has the same parts as me and he fixed the problem by using a pair of RAM with a lower voltage.
On MSI's page, it says there that the motherboard that I'm using supports 1.5V of RAM and I just checked the manufacturer's page for the RAM that I'm using and my RAM is listed as using 1.65V... could this really be the problem? Should I go ahead and get new RAM or is there maybe something else?
I also removed the CMOS battery for 1 hour and then moved the jumper to positions 2 and 3 to short the pins and I still can't get past the first screen. I'm going to try using just one stick of RAM next and should I insert it in DIMM1 or DIMM2?
Thanks in advance!

Quote from: XFM on 11-November-13, 06:25:55
Get a stick of cheap 1.5V RAM and give it a try. Plenty of good quality cheap RAM out there. In this instance my meaning of cheap is "low price" not low quality.
To be honest I would suggest to just go ahead and get some Corsair RAM such as what you see in my signature below. That is one brand that seems to work good in just about any system built using MSI MB whether it be AMD or Intel.
Thanks! I just ordered these - http://www.amazon.com/dp/B003N8GVUY/
Cheapest Corsairs I could find with 1.5V
Quote from: XFM on 11-November-13, 06:25:55
Another question I forgot to ask is what is the brand and model of your power supply?
I'm using one from an old PC... this one - http://www.newegg.com/Product/Product.aspx?Item=N82E16817121037

My iMac starts, but won't get past the loading screen?

My iMac starts up, but won't even get past the white screen with the Apple logo.
It kept giving me black screens, and would not start in safety mode. After command + option + p + r, the black screens stopped coming, but it still won't get past the loading screen, if I let it load long enough the Apple logo is replaced by a "denied" symbol but that is the only thing that happens. By hitting command + d, I was told nothing is wrong. When pressing command + r and going to disk utility, it found an issue while verifying and repairing. At first it stated "invalid journal" but now it only says to reinstall everything and that the problem couldn't be solved. I cannot mount the harddrive, and Time Machine just searches for copies without getting anywhere. When I try installing OS X (Mavericks) again, the harddrive doesn't even show up. What do I do?

The HD sounds like it has crashed, take it into your local Apple Store or Apple Authorized Service Provider (AASP), if you bought AppleCare this will be covered. If you don't have an Apple Store in your area and don't know of any AASPs then please click https://locate.apple.com/country to begin finding one.

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. MY question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this aren't working

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. My question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this, such as using turning off the SMS preview under the "passcode lock", well that option no longer exists, or if it does, I'm somehow missing it.
When I go to the "messages" setting under settings on my phone, I still don't see an option of turning it off.
If I can just get the name of the person sending the message, as I had it before, I'd be happy.
Help!

That option still exists in Settings > Notifications > Messages > Show Prview (OFF) and View in Lock Screen (ON). Here's how to configure your Notifications and Notification Center for iOS 5: http://iphone-and-i.blogspot.com/2012/01/how-to-customize-notification-center-in .html

Hello my name is RESHMA JAN ,i want ask about my itunes..why i cant to open from my PC?everytime i want open still cant..and i get one note from my PC..i also dont know what my problem..

hello my name is RESHMA JAN ,i want ask about my itunes..why i cant to open from my PC?everytime i want open still cant..and i get one note from my PC..i also dont know what my problem..

Hello Reshma Jan,
You will find the solution from other similar discussions from the below link :
https://discussions.apple.com/message/18744905#18744905
https://discussions.apple.com/message/22910553#22910553

Hello,Where in Singapore can I get a LCD display and touch screen digitizer for a iphone 2g.

Hi there,Where in Singapore can I get a LCD display and touch screen digitizer for a iphone 2g.

Try searching google.

My new iMac had the old data transferred in-store but now it won't accept the password on the first screen. How can I reset this? I can't get past the first screen as a result.

I cannot get past the initial screen on my new iMac. Data was transferred from my old computer so when I turned it on It automatically had my name in the window and asked for the password, but none of my old passwords seem to be accepted. How can I fix this?? It's a new IMac with osx.

Which password isn't working? The one to access the iPad or the one to get your hotmail?
If hot mail, you go into the settings, mail, contacts and calendars and edit your hot mail account. Of if it won't edit, delete it off the iPad, then re-add it with the new password.

HT4528 Hello, My name is Ramondo Frank. I was instructed to upgrade the operating system on my IPhone. I followed the instruction but are unable to get past the terms and services screen

Similar Messages

Maybe you are looking for