HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error
There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off. How can I solve this problem please?
When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
Similar Messages
-
I am trying to update Microsoft Office 12.3.3 on my Macbook Pro, but once it is installed terminal opens. What am I supposed to enter into Terminal?
Still trying to understand. You install one of the MS updates (most recent was 14.2.2) and after the update completes (before the installer quits) terminal opens? Or the installer quits and then terminal opens?
And who is prompting for "Check for updates" ("get taken back" to what)? Is this coming from office, say when you run Word? Certianly the updater doesn't cause this prompt. -
I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.
See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support -
How do I use Bluetooth to connect my MacBook Pro to my iPad?
I am trying to sync up my iPad to my MacBook Pro. The status on the MacBook shows that the two are paired, but neither shows them as connected. How do I achieve the connection in order to share files?
On the advice of a friend I installed and ran a program on my MacBook called 'IPSecuritas'. This has stopped my wireless network from appearing and disappearing, but I still can't connect. Would really appreciate some help with this.
-
Problem while using Internet USB Connection with Macbook Pro
Hi...
My name is udayan and i am from India, I am using MACBOOK PRO from last 1 year. For most of this period i have used wi-fi connection for my laptop. But recently i have purchased a Relience Net connect Device for Internet facility. As soon as i started using this device, i have started facing an unusual problem. Whenever i start using it, after 5-10 mins. a fade screen appears and asks me to RESTART the laptop. This keeps on happening after every 10-15 mins which is pretty annoying. I have tried to use the same Internet device on normal laptops and it works just fine with that machine.
Can you please help me to understand this phenomena? Is it a MAC limitation or something else?
Hope to hear it from you soon.....
Cheers!!!I tried to connect with Ethernet the MACBOOK Pro to the modem but the situation hasn't changed
Are you saying you cannot connect to the internet wirelessly and through the ethernet? If so, there is something else going on.
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
=============
Mac OS X (10.4.6)
Use Software Update to update your OS to last version of Tiger which is OS 10.4.11. Install all the other updates that goes along w/it. -
I'm using CS6 with my new macbook pro why is it all pixalized
just downloaded the trial for the 30 day of photoshop CS6 on my new MACBOOK PRO with retina display and its very very pixalzed. WHY?!
It shouldn't be at all. I'm running Photoshop CS6 on a 2011 MBP and it's working fine. The only thing that I can figure out is that you may not be running at the recommended resolution? What res are you working in? Photoshop is not yet optimized for the full screen display max on the MBP-R.
Call back...
Clinton -
sorry th title is so long. Wondering if I can use cs6 on another computer besides my 2009 iMac. Thanks.
Transfer of software to another owner is usually handled by Adobe.
So if you do not have a serial number its not yours to use. -
I am using Photoshop CC on a MacBook Pro. I have all "Updates" installed. When I
Regarding the filters, "Picture Frame" and "Tree" they have never worked with PS CC 2014.
Under the "Filter" then "Render" then "Picture Frame" I get this window:
Error 48: File or folder does not exist.
Line: 1264
-> item.image = scriptPathLocal + '/' + currMenu.itemList[ii].image // add icon image to the menu item
And under "Tree" I get this window:
Error 48: File or folder does not exist.
Line: 1264
-> item.image = scriptPathLocal + '/' + currMenu.itemList[ii].image // add icon image to the menu item
Any ideas? I think I may be able to use these filters if they'd work.
Thanks for any assistance.Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
-
HT201210 trying to restore ipod and I get an unknown error
Trying to restore ipod touch and I get an unknown error.
What is the complete wording of the error message?
-
my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???
By the way, i am using Windows 7 x64 and updated itunes
-
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
i m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help
Hello Mubashir surf google and try pressing power and home button at the same time untill apple sign shows up and then leave it .
Otherwise surf google you mite have to edit you host file in windows , system32
Let me know if it works -
4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.
Hi there Schusski,
I would recommend taking a look at the troubleshooting steps for Error 4005 found in the article below.
iOS: Restore errors 4005, 4013, and 4014
-Griff W. -
Trying to update my new phone 4s to iOS6. It says my phone is in recovery mode what does this mean. And how do I solve it please?
It means exactly what it says.
Connect the device to iTunes and restore. -
I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help
Hello Sam-marchesi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Best of luck,
Mario
Maybe you are looking for
-
Hi, We are trying to use the SFTp transport in OSB 11g. Did the setup as mentioned in the documentation. The SFTP server is hosted on linux machine and using the user password mechanism. We are reading a file using the ftp adapter and routing to the
-
Why my form doesn't fit in the navigator window?
Why my form doesn't fit in the navigator window?. When I execute the form from navigator the form appears in but the size is less than the size of the explorer and shows shows vertical and horizontal scrollbars. What can I do to avoid this?, Is there
-
Extracting string from a file name
Hello, I have a legacy (read: I didn't build it) SharePoint list that includes some validation when uploading files that's giving me some trouble. Basically, our users are required to add files to a list in a certain filename format and based on the
-
Distribute AuC (Investment Measures) to a number of AuCs AIAB, ABUMN
Dear All, maybe you can help me with this problem we have here: Why isn't it possible to define an Asset Class (TCode OAOA ) as an Investment Measure ( ANKA-XINVM ) and line item settlement ( ANKA-XOPNVW ) at the same time (i know that a radio button
-
Extending Container for custom layout not working properly
I'm trying to extend javafx.scene.layout.Container to make a custom layout manager that centers a grid of components and fills all available area in the stage (minus some insets, eventually). I'm using some private members to do this, but it's also b