Distribute AuC (Investment Measures) to a number of AuCs  AIAB, ABUMN

Dear All,
maybe you can help me with this problem we have here:
Why isn't it possible to define an Asset Class (TCode OAOA ) as an Investment Measure ( ANKA-XINVM ) and line item settlement ( ANKA-XOPNVW ) at the same time (i know that a radio button allows only one of it).
So that you are able to distriubte/split defined Investment Measure AuCs to a number of AuC with the TCode AIAB (the usual way to distriubte normal AuC to a number of AuCs).
The TCode ABUMN isn't able to distribute/split one AuC (Investment Measure) to a number of AuCs.
Maybe some has a solution for me.
Thanks for your help!

First of all thanks for your help.
I have done your suggestions already. But my problem is, that I have an AuC (which is defined as an investment measure with an investment profile and the transaction type 348/349). On these AuC i have some values from an internal order (settled on the AuC with KO88).
Now I have to move the values from the AuC wich has the Asset Class 1520 (AuC as investment Measure) to a number of  finished Assets (i.e. xxxx, yyyyyy) with the Asset Class 1161 Machinery.
And with the TCode ABUMN wich is mentioned in the SAP library for the investment measures you are only able to transfer one asset to another asset.

Similar Messages

  • Is it possible to do write-up of depreciation for AUC(investment measure)

    Dear All,
    In one AUC asset posted some negative value, say -7000.00. After that posted 100000 through WBS internal AUC settlement. Posted the depreciation for one month. After that they have reversed this 100000 AUC settlement. For Book deprn it is 0% rate and for Tax deprn rate is 100%. So now Book deprn NBV is coming correct as -7000.00. For Tax deprn NBV is -21000.00.
    Requirements,
    1) I want to write-up the Tax deprn posted 21000.00 then
    2) Is it possible to transfer negative value -7000.00 to new asset.
    For 1) I have tried in ABZU with T.type 712 but it is showing error as "Asset is investment measure, transaction type not allowed".
    Is there any other transaction type I can use for this or do you have any other solution for this.
    Regards
    Shanu

    Dear All,
    In one AUC asset posted some negative value, say -7000.00. After that posted 100000 through WBS internal AUC settlement. Posted the depreciation for one month. After that they have reversed this 100000 AUC settlement. For Book deprn it is 0% rate and for Tax deprn rate is 100%. So now Book deprn NBV is coming correct as -7000.00. For Tax deprn NBV is -21000.00.
    Requirements,
    1) I want to write-up the Tax deprn posted 21000.00 then
    2) Is it possible to transfer negative value -7000.00 to new asset.
    For 1) I have tried in ABZU with T.type 712 but it is showing error as "Asset is investment measure, transaction type not allowed".
    Is there any other transaction type I can use for this or do you have any other solution for this.
    Regards
    Shanu

  • Legacy AuC - Investment Measure

    Dear Experts
    One of our SAP client is getting merged into another SAP client effective 1st April 2011.
    I'am not sure regarding the takeover of AuC which are not completely capitalised.
    I've read several threads and it has been suggested to use TType 900 for prior year data in AS92.
    I've tried that but system doesnt allow this Ttype in case of AuC created as Investment Measure under asset class 4001.
    Error msg-
    Trans. type 900 allowed only for assets u. const. Please correct.
    Message no. AA967
    Our Investment profile is created with 'Summary Settlement'.
    Please suggest how to go ahead in such case.
    Regards
    Kapil

    Hi,
    If you are sure that the AuC has to be linked ot and Invesmtnet measure, then create the Invetment order or the WBS, post the openning balance of the AuC by using a cost element crated for this exercise, maintain the allocation structure by defining that the settlement has to be executed with the primary cost element and settle the order.
    Regards,
    Mariya

  • AUC from Investment measure can't settle to the completed asset partially.

    Dear.
    I using IM module and AUC which made from Investment measure.
    and I post cost to Investment order and settle to AUC periodically.
    Some amount In nvestment order should be tranfer to the completed asset. so remained amount in that should be keep going on.
    But, Investment order settlement rule only can be maintained by FULL settlement method.
    It means, all amount that accumulated in Investment order must be settled.
    What I want to do is the partial amount settle to the completed asset and remains left in investment order.
    Of course, this investment order keep its function as collect the amount of AUC.
    How can It be?

    Hi,
    Use KOB5 - Give the settlement rule - mention the required amount and asset code
    Use KO88 and settle the asset by selecting Settlement Type - Partial Settlement
    Regards,
    Muralidhar

  • Capitalization of  AUC investment  measure  to asset

    Hi,
    I created a project and then settled corresponding WBS elements to AUC investment measure using CJ88.After that i am not able to capitalize to final asset.Please help me in procedure  as I am not able to settle using normal line item settlement AUC as this is investment measure.

    Hi Prad,
    I am on 4.6C/D.
    Please check on your settings for Capitalization of AUCs created through Investment Support Measures: -
    1. Go to the IMG, Asset Accounting under Special Valuation and determine the Depreciation Areas you would like your Investment Support Measures to post to.
    2. Still in Special Valuation, define an Investment Support Key and assign it to the relevant depreciation area
    3. Also, define the relevant account determination for such posting under the Special Valuation
    4. Proceed in the same area to define the Transaction type for the Investment Support Measure by changing any of the Standard ones in there in line with your requirements
    5. Now move back to IMG, Asset Accounting then Master Data. Here you go to the screen layout and pick the relevant asset class for AUCs. Get this logical feild group and pick on the item Investment Support. Proceed to define its feild group rule as optional at the required asset maintenance level (Main Asset and/or Sub Level)
    6. Leave the IMG and access the relevant AUC's Master Data from the User Menu. Click the tab Investment Support and insert the Investment Support Key you created in note 2 above
    7. Now capitalise the AUC. Should work

  • Change of Cost Center in Asset Master for Investment measure (AuC) Assets.

    Hi,
    We have an asset class 4001 which has been maintained as an investment measure for AuC. I want to change cost center for all the assets that are maintained in the asset class 4001. The system is showing cost center field in display mode in change transaction of the asset AS02 for all the assets in the asset class. I want to replace the old cost center with new cost center in the asset master record. How can I make the cost center field changeable ? 
    Can anyone help me ?
    Regards,
    K.S.K

    Hi Kattula,
    We can change the cost center for AUC with Investment Measure. To do this you need to identify the relevant WBS element assigned to your asset. You can find the WBSE in Origin tab of your asset master record.
    Then go to the change WBS element Transaction CJ12 and change the cost center. Once you change the cost center of the WBSE, the change would automatically get reflected in the correspondind asset master record.
    This would solve your issue.
    Thanks & Regards
    FICO GSupport team.
    RK & IK.

  • Order 23 is not a capital investment measure for Asset accounting(AUC)

    Dear All,
    Help This Error
    For T Code  Ko02 select order for AUC  getting this error
    Order 23 is not a capital investment measure
    Message no. AY097
    Diagnosis
    Object concerned: Order 23 .
    The object is not an investment measure, either because there is no investment profile entered for it, or the indicator "manage asset under construction" is not set in the investment profile.
    System Response
    Processing is not carried out.
    Procedure
    If you want to create assets under construction for the object, then enter an investment profile in the master data for the object.
    Check if the the indicator "manage asset under construction" is set in the definition of the investment profile.
    Replay solution ASAP
    Regards
    Nag
    Edited by: Nagaraju Chagonda on May 24, 2011 1:18 PM
    Edited by: Nagaraju Chagonda on May 24, 2011 1:19 PM

    Hi Nag,
    Please check if correction note 1165656 is valid to your release. It can correct this error.
    Best Regards,
    Vanessa.

  • Making interco transfers ABT1N for AuCs created as investment measures

    My client uses Investment Management (IM) for projects as investment measures. AuC assets are generated for each account assignment WBS element upon project settlement.
    Is there a way to make an intercompany asset transfer directly from one AuC (IM) asset to another via ABT1N or some other transaction, without having to settle to a final asset first? It is my understanding that this is not possible, that all posting to AuC can only be done through the WBS element, not directly to the AuC. Does any one have any suggestions/ideas about this?

    Yes, I have tried this.
    When I try to post an intercompany entry with tcode ABT1N, using AuC assets, I get the following message (which is what I would expect).
    Asset is investment measure, transaction type not allowed
    Message no. AK005
    Diagnosis
    Asset 1085 70020952-0  that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
    Procedure
    Check the asset and transaction type 230
    I have also tried to create non-IM AuC asset classes, settle AuC balances to these, and then do the ABT1N. I also have tried to do reversals and re-postings of all the entries made to the WBS elements on the old and new company codes. These work to an extent but they are extremely cumbersome and do not meet all customer requirements.
    I was hoping someone had a similar experience and was aware of a way that I had not thought of to do a direct intercompany transfer of AuC's.

  • What is the Differance Between AUC Assets & Investment Measure Assets?

    HI,
    1. What is the differance between AUC Assets & Investment Measure Assets? How to settle the Investment Measure AUC assets to main asset?
    2. When i create the Internal Order, The system should automatically creates the Settlement rule for the AUC asset. I dont want to create settlement Rule Manually.
    Kindly help me what should i do if the system wants to create the Settlement Rule Automatically? It would be a great help for me if you can provide some inputs..
    Thanks
    Kishore

    Hi,
    Would like to suggest, if you post this query in Asset Accounting Forum under SDN itself, you would get fast response.
    Regards,

  • Asset under Construction for Investment Measures

    Hi all
    This is my client requirement
    how to do asset under Construction for Investment Measures
    configration
    pls send configration

    Hi
    These are the steps to be followed:
    1. Create a asset class for CWIP (Auc) - OAOA: In this select Investment Measure under Status of AuC.
    2. Define Investment Profile (OITA) - Give AuC Asset class as invest measure asset class.
    3. Create Internal Order Type for Investments: Normally standard 0650 order type will take care of the requirement.  We need not to create anything.
    4. Create Asset (AS01) under normal asset class i.e., buildings or vehicles etc... (You cannot create under AuC Asset Class)
    5. Create Internal Order (KO01): Give Object class as investment and under Investments tab give investment profile created in step 2.
       Go to settlement profile tab and give category as FXA and settlement receiver the asset no. and give 100%.
    6. Change asset master to incorporate the internal order number under Origin Tab.  Give no. in Investment order field.
    7. Release the Internal Order (KO02)
    8. Post the transactions through different T.Codes by referring Internal Order as account assignment.
    9. Go to Internal Order through KO02 and complete TECO under control data.
    10. Go to T.Code KO88 (internal order settlement) and settle the order.
    Hope this will help you.

  • Error while creating PO for Asset is investment measure

    Hi All,
    I am getting error when I try to create PO for Asset which is investment measure.
    Error is as below:-
    Asset is investment measure, transaction type not allowed
    Message no. AK005
    Diagnosis
    Asset 305000003 0 that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
    Procedure
    Check the asset and transaction type 120.
    I am using account assigment catergory 'A' in PO. I have checked Allowed transaction type for Acquisition and 120 is already allowed.
    Please guide.

    Hi,
    Try to create PO with account assignment category as P/N for project related ones.
    If the related asset is related to Investment Measure we need to settle transactions to WBS element and from WBS element to AUC. We cannot directly post to AUC.
    Thanks and Regards,
    padmaja

  • Auto generation of settlement rule for PM orders that are Investment Measur

    Hi all
    Has anyone successfully automatically generated settlement rules on a PM order that is an Investment measure? The settlement receiver would be an asset. User exit IWO10027 doesn't work. Std settings don't work either because a settlement rule is auto generated for the AUC on the order during settlement (Note 195607) because of IM.
    Any ideas?
    Thanks
    CC

    for a PM order as investm,ent measure the system assumes that you wish to create an AuC hence no other settlement rule generation is allowed
    you can try by removing the asset class in the IM profile

  • Asset Acquisition - Investment measure

    Dear All,
    Our client uses investment measures process for posting the acquitsition of fixed assets. We are facing a problem at the time of final settlement to the final asset. The system is not able to derive a profit center at the time of final settlement.
    The following details might be useful -
    1) Document splitting is active and profit center is mandatory in the document splitting settings
    2) Investment order is created with Profit center A. The same is settled on an AUC periodically. Here the capitalisation entry is passed in Profit center A.
    3) Two final assets are created with cost centers B & C. These are entered in the settlement rule (KOB5). When we execute the settlement we get an error saying that the profit center cannot be determined.
    P.S If we put only one asset in the settlement rule, the settlement goes through smoothly. However, there is a problem - the entry is passed only in one profit center i.e. which is input in the cost center master  (say B). This results in a
    AUC value lying in Profit center A and the reversal of this in Profit center B.
    Request you to provide a solution for this issue.
    Regards,
    SLS

    Hi
    Any suggestions please?
    Thank you.

  • Error at the time of PO creation - Asset is investment measure, transaction

    Hi all,
    When am assigning the Investment Order (order for AUC) against Asset at the time of creation of Asset PO, the system throws the following error:
    Asset is investment measure, transaction type not allowed
    Message no. AK005
    Diagnosis
    Asset 1700000 0 that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
    Procedure
    Check the asset and transaction type 120.

    System expects you to enter the Investment Order rather than the asset as account assignment object in the PO.
    Regards
    Sreenivas

  • Creation of Assets for Capital Investment Measure

    Hi,
    Can some please tell me how to create an Asset for Capital Investment Measure.

    Hi,
    First you have to create master data using asset class AuC.
    You have define asset class for Capital Investment Measure (AuC class) in t-code : OAOA. And still in the same t-code (OAOA), you choose "investment Measure" in box "Status of Auc".
    If you choose "Investment Measure", the assets under construction in this asset class can be created solely in relation to capital investment measures (internal orders or WBS elements).  So you cannot create and post in Asset Accounting directly (Example post using t-code : F-90).
    If you use WBS Elements then you can post to the asset for Cap Invest Measure using t-code : CJ8G or CJ88.
    Hope it can help.

Maybe you are looking for