HT4623 my iphone is not able to be activated,is not detecting tha sms card

i was trying to update my old iphone and now is not detecting the sms card

That's because the phone was almost certainly hacked to be used on your network. Updating it has relocked the phone to the original carrier.

Similar Messages

Why is my iphone 3gs not detecting my sim card

what is happening with this phone

99% your iPhone is hacked/jailbroken, now you need the SIM from the carrier the iPhone was locked to.

Iphone is not detecting network after updating, i m not able to configure it

my iphone is not detecting network after updating, i m not able to configure it

To answer your question there, are you unable to connect to cellular internet (using a SIM or WiFi?

Updated iTunes to latest version (10.4.1.10) resulted in computer no longer recognising my iPhone 4. Uninstalled and then reinstalled iTunes, still my iPhone is not detected by iTunes.

Updated iTunes to latest version (10.4.1.10) resulted in computer no longer recognising my iPhone 4. Uninstalled and then reinstalled iTunes, still my iPhone is not detected by iTunes.
Please can anyone help…..

c) unistalled and reinstalled iTunes
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Why will my iphone 4s not accept my credit card

Why is my iphone 4s not accepting my credit card always comes back with declined no matter how much money i have in my account

Is the card registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes Support and see if they know why it's being declined (we are fellow users on here, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Iphone device not detected in PC, hence autoplay setting not available

My iphone is not detected under autoplay, therefore i cannot import/export pictures.. please help!

Here is a starting point
http://support.apple.com/kb/TS1538

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

Most likely the phone is locked to a carrier that you haven't tried yet.

"iPhone is not accepting any sim card in Pakistan and showing iphone IS DISABLED"

i have bought an iphone 4 from america and now m in pakistan my iphone 4 not accepting any sim card and if i enter sim card it shows only single signal bar and saying IPHONE IS DISABLED it was working perfectly in america what can i do activate it in pakistan? when i turned it on it said enter pas code i entered that code as 0000 and then it start showing iphone is diabled connect to itunes and than i connected it to itunes but it is not connected in itunes ? plz give me complete solution of this problem so that i will start using my iphone 4g in my country
thank you!
Saad Ahmad
Lahore, Pakistan.

Im guessing you mean the iPhone 4? anyway ...
Because you brought the phone in America, It will be locked to either the AT&T network, or Verizon. These will ONLY work within the United States, and under no circumstance will they unlock the phone for international use. Unfortunatley, that means you are $500 out of pocket, and have an expensive paperweight to your name. The only way to get an iphone 4 in your country is wait for it to be released, and in the meantime, sell the one you have to someone in America.
Hope this solves your issue

Iphone is not detecting any WiFi Network

Dear All
my iphone is suddenly stopped receiving WIFI networks, whenever i am tring to conect to any WiFi network My iphone could not find that networks at all, i tried to find wifi network manually by typing network name but steel my iphone could not detect that network! Even if I'm 2 millimeter from the router it's not recognize any network. i reset network setings but it doesn't work, i upgred my iphone softwere to 3.0.1 but steel no wifi
My iphone is under warrenty its just 6 month old, i had taken this iphone to service center in mumbai (india) [Vodafone Care (century bazar)] they told me that we dont have wifi to check your iphone, you have to submit your iphone for check, and it ll take 10 or more days for serviced your iphone,
I feel that i made a mistake that i paid 30,000 INR for a IPHONE, as i am not geting fast service from apple in INDIA
If anyone can help me out of this, Plz mail me on [email protected] or call me on +91 9930004535

Hi there Minakshilodha,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W.

Iphone 4s not recognising new sim card keeps saying sim not valid?

iphone 4s not recognising new sim card keeps saying sim not valid. Can anyone advise me please?

There are three possibilities:
1. Your phone is locked to a different carrier and will not work with any SIM card except those from that carrier.
2. Your new card is from a carrier not supported by the iPhone.
3. Your new SIM card is defective.
In order to determine which is the right answer you could try a different sim from the same carrier or try your new card on a different iPhone. Also check to make sure your new carrier is a supported carrier.

My iPhone 5 not detected on iTunes 11

My iPhone 5 not detected on iTunes 11

Because both iTunes and the version of OS X are too old to support the iPhone 5.
You are going to have to purchase the install DVD for Snow Leopard and then upgrade to it. Once there you will need to update to 10.6.8 and then iTunes 10.7 should install.
Allan

Iphone 4s not detecting in iTunes after ios 7.1.2 upate

My iphone 4s not detecting in iTunes after ios 7.1.2 update, please help
regs
sk

Can you try to connect to another computer?
DFU mode would be the last thing to try before contacting Apple Support or visiting an Authorized Apple Service Provider or Apple Store.
iPhone - Contact Support - Apple Support
iPhone, iPad, or iPod is not recognized by Windows due to driver installation issues

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

HP DV5t 5-in-1 card reader does not detect my SD card

The 5-in-1 card reader slot of my HP dv5t was working fine until yesterday, and reading my Canon SD card perfectly. However, today upon inserting the card, the card reader is not detecting the SD card. The card doesn't even show up in my device manager. My SD card has no issues since it works perfectly fine on other laptops (I even tried it on another dv5t and it worked). My guess is that there is something wrong with the hardware, since the card doesn't get recognized by the reader even when I use it on Ubuntu. Can anyone please suggest any solution?
I tried contacting hp customer care and after an excrutiating wait of 1 hour or so I had to hang up - out of boredom. My laptop is under warranty but I am really pissed off with hp, I think hp laptops have some of the worst hardware. Also, it takes ages until you can speak to a customer care executive. Can someone please help me? If hp were to give me 70-80% of my money back I would happily swap hp for a T61 or even a Dell!
Message Edited by ttotade on 12-06-2008 02:34 PM

I'm having the same exact problem on my dv5z. I even tried downloading and reinstalling the drivers, but it appears to be a hardware issue. I had a similar problem with my wireless card early on and I think it may be a build quality problem. Any suggestions other than dealing with sending the unit in for repair?

HT4623 my iphone is not able to be activated,is not detecting tha sms card

Similar Messages

Maybe you are looking for