HT4623 This is my mother's ipad. It is not the last version. Model MC979LL. SERIE # DN6GFS1ZDKPH. I can not find in settings the option to update the last ios7.
What can i do to upgrade her ipad . It need the version IOS7 to download anything she wants
Based on teh model number, that should be an iPad 2. If you are not already on iOS 5 or later, you will need to plug it into a computer running a current version of itunes in order to update (updates via Wifi did not becaome available until 5).
Similar Messages
-
I have purchased house locator apps for my ipad but Icahn not find any house in India example my own house ,I can not see. again I want to buy cinema apps but it shows transecting problem but other apps are purchased easily by my same card.
I actually have already activated it the passport on AT&T and you are correct as long as Verizon continues with this whole must have CDMA than eventually Verizon will be in Sprints spot. Have to keep up with the changing landscape. As we all know blackberry did not do. However this new passport is so amazing and has that wow factor I think they could be onto something. Let's hope they stay on this path because they are the only phone I use. While there are a lot of great phones out there I am a blackberry user.
I most likely will not go with the classic because I can't see me going to a smaller screen when I have this one. I have been wanting a large screen keyboard for so long. The keyboard does take some getting used to, and with the passport 2 I'm sure they will correct those things. -
I use my bh-111 with my windows phone, my laptop and my wife's android jellybean phone without issue but the ipad mini will not find it, any ideas?
Hello Jamessm,
I would try the troubleshooting steps in the following article about Bluetooth and iOS devices.
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My iPad 2 does not find my Big Blue Live speaker! What do I do?
My iPad 2 does not find my Big Blue Live speaker! What do I do?
Make sure you're using an original apple ipad charger and plugging into a wall outlet to charge, not computer.
Its possible that the charger is bad and may need replacing.
Its also possible that the battery has gone bad and it may need replacing.
Apple does offer battery replacement, you will have to send to them or take it to an apple store.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Before you do that though, I would recommend reading through these links first for some more information on how your battery works, needs to be charged and maintained.
Apple Batteries - iPad
http://www.apple.com/batteries/ipad.html
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327 -
Ipad 2 will not find me when i use or maps, but it will in the office - all wireless
My iPad 2 will not find my location when I use Maps when i am out of the office but it will when I am in the office - i use wireless. Location selector is ON.
Any ideas?belvoirfarm wrote:
Thanks for the quick reply.
my location is found when i am in my office and wireless (don't have 3G)
When i am home and connected to my wireless router - ( and i am connected as i surf the net, get emails etc.) it says it cannot find me.
That's because the location of your home router is not yet in the router location database. -
Apparently, something went way wrong SOMEWHERE, SOMEHOW... and now I'm afraid of losing ALL MY MEDIA considering I have NO ITUNES ON MY LAPTOP! I followed all appropriate steps found in trouble shooting, when I reinstalled iTunes though, the reinstalled music on my pc was a handful of songs that were triplicates, even listed some five TIMES! And maybe a total of 20-25 different songs, a fraction of what I had initially!
*N OVER MY HEAD! my iTunes library disappeared from my PC, TS said uninstall then reinstall, before I reinstalled though my ipad 2 said NOT ENOUGH MEMORY as I tried to update 1 app. What do I do now?1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad -
Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.
Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…
-
Since 8.0 update on my ipad, I can't find autocomplete settings, which used to work for all apps. So much for new and improved.
Settings > General > Keyboard
-
I have a first generation Ipad and am currently running software version 5.1.1 I have tried to update it to a newer version both wirelessly and thru Itunes but have been unsuccessful. Am I stuck with the older version or is there another way?? When I do run the update, it gives me the "you have the current software" message.
Thanks.no - there is no upgrade available for the version one iPad past IOS 5
LN -
IPad 3 will not sync "no limit" email option on exchange server email.
I just purchased an iPad 3 updated to 5.1.1 software. My personal exchange email from my ISP will not download the "no limit" option. However I still have this email setup on my iPad 2 and i have removed/readded and it works no problem.
I have removed and reset up the email on the iPad 3 and still not working. Also I notice that if I choose 3 days it will sync, then choose "no limit" it will just stay at the 3 days, this is the same for all other options too.
Any ideas?1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush -
My new iPad mini would not download an update bnor allow access to app store downloads etc, I decided to revert to original factory settings, the screen is now frozen, showing only the Apple logo in white on a black background, it is now frozen, what can I do?
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
IPad 1st Generation not finding networks or connecting to bluetooth.
So, I haven't used my iPad all day and I came home to connect to my wireless speaker via bluetooth and it said it couldn't pair; I thought this was strange because I never have issues with connecting to bluetooth, even if I do it can always be fixed by toggling the speaker's power switch as well as the bluetooth switch. I then checked the upper left hand corner to see if my wireless was working, that too was inactive. I went to my settings to select my usual network only to have my iPad search and come up with absolutely no nearby networks, I went to my Mac and the internet was working just fine. So my iPad will not work with my network or work with my bluetooth. I have already taken many troubleshooting steps. 1. I reset my network settings, 2. I adjust the brightness, 3. I rebooted the iPad, 4. I finally restored the iPad. After all this, my iPad still will not connect. Yet every other wireless capable device in the house is working just fine. After I restored the iPad I made sure not to restore from a backup so it's completely fresh. Has anyone experienced any of this, and will I need to call Support, as this may be a hardware issue, Even though I JUST had this iPad replaced not too long ago.
Yes, that was one of the common sense steps that I left out.... mainly because, well, it's common sense. I don't mean to come off as rude or anything, but the router effecting only my iPad when there are two iPad's in the house that run the same firmware as well as other devices that are working fine seems like an unlikely answer to my problem. However, I do appreciate the input. Any is appreciated, helpful or not.
-
New IPad airprint does not find Officejet Pro 8500 A909g series with DLM1FN1006BR firmware
Does the Officejet Pro 8500 A909g seriea with DLM1FN1006BR firmware accommodate airprint on the new IPad? If not, is there some fix?
This question was solved.
View Solution.No, your printer is not AirPrint capable and cannot be. You can try other printing apps, like HP's ePrint Home & Biz.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Also, is there a way I can email a Pages document on my iPad?
You have posted this n the wrong forum, which is probably why you havent ha. Reply yet.
I'll try to help anyway.
At the moment iCloud only shares pages documents between iOS devices, which is why you can't find them on your iMac.
To email a document from our iPad, touch the spanner icon in the top right corner and then "share and print"
Hope that helps. -
IPad 2 "network not available" under settings/general/about.
Unable to access settings/general/about/network on my iPad 2.... Need assistance in understanding whether this is a problem, and if so, what are the solutions.
Thanks.found the answer in FAQ's. Thanks
Maybe you are looking for
-
Library on External Drive - Setting up on a New Computer
This is the second time I've done this and the first time was a disaster, despite reading and reading on this topic. I had a desktop. I kept all my music on an external hard drive, including the library. The path my iTunes was setup to use was E:\iTu
-
I have a interface scenario that maps a XML file into a SAP IDoc. When the message reaches the Call Adapter stage I get the following error <SAP:Category>XIAdapter</SAP:Category> <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code> <
-
Too close to exchange for Infinity?
I live about 100 yards from my exchange (Almondsbury) and see from the BT website that, as I'm connected direct to the exchange, I can't get Infinity. Why is this and will I ever be able to get it? According to a BT engineer there's only one joint be
-
I loaded Oracle8, I start the TNS-Listener ($lsnrctl start), I am not using Oracle names server. I test the connection to Oracle8 whith JDBC thin, I use the sample $ORACLE_HOME/jdbc/samples/thin/JdbcApplet.java No problem on localhost, but i have pro
-
FAX option is inoperable. Tried to set up again but get message that FAX is not on line. We can print and that is all. We were able to FAX until recently.