Ipad 2 will not find me when i use or maps, but it will in the office - all wireless

My iPad 2 will not find my location when I use Maps when i am out of the office but it will when I am in the office - i use wireless. Location selector is ON.
Any ideas?

belvoirfarm wrote:
Thanks for the quick reply.
my location is found when i am in my office and wireless (don't have 3G)
When i am home and connected to my wireless router - ( and i am connected as i surf the net, get emails etc.) it says it cannot find me.
That's because the location of your home router is not yet in the router location database.

Similar Messages

  • "Non rectangular objects will not appear correctly when exported using CSS."

    I am using Ind CC 2014 exporting a document to a reflowable epub.  The document contains an .ai image.  The image exports correctly in some parts of the.epub but not others, where it is distorted. There is a warning on export :"Non rectangular objects will not appear correctly when exported using CSS."  Any suggestions appreciated.

    Thanks!
    >
          "Non rectangular objects will not appear correctly when exported
          using CSS."
    created by pooja2087 <https://forums.adobe.com/people/pooja2087> in
    /InDesign EPUB/ - View the full discussion
    <https://forums.adobe.com/message/6886892#6886892>

  • My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

    My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    When it  says place the iPod in recoverymode use one of these programs.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                  
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

    Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

    Please refer
    Doesn't launch after 30 days | Installed as part of a CS6 suite

  • My iPhone 5 will not sync as i need iTunes 10.7 but this will not download as i have OS 10.5.8

    My iPhone 5 will not sync as i need iTunes 10.7 but this will not download as i have OS 10.5.8

    You need to upgrade your OS to this:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    From there you upgrade iTunes, & you'll be able to sync your phone.

  • Firefox will not load pages when I use my back button

    It is just doing this on the one site

    Does this happen when you are both logged in and out of the website? I have tried accessing the website myself and I am able to access the site and use the back button on this site without logging into the site. If this only happens when you log into the site most likely it has to do with the login session that causing this problem.

  • Hotsync Manager will not come up when I double click on Hotsync - device will not Hotsync

    I have a Windows 7 64 bit PC and am trying to hotsync using USB to a MEZ1000 Palm device from Aceeca.  I am using their 64 bit driver for the USB.  I installed Palm Desktop 6.2 and the Acceca 64 bit driver about 4 months ago and it was working fine.  A few days ago I tried to hotsync and it wouldn't.  Tried rebooting PC and uninstalling and reinstalling the Palm desktop and Aceeca driver.  I have done that 2 - 3 times following the clean uninstall instructions that I found on this forum.  The install hangs when it tries to configure the registry.  I can see the hotsync.exe process in the task manager.  The install will not proceed past this point unless I end the process in the Task Manager.  Also, in searching the PC for anything named hotsync, I found a file called Report.wer that was dated 04/02/12 (the day I first tried to hotsync and failed) in C:\Users\ADMIN\AppData\Local\Microsoft\Windows\WER\ReportArchive\Critical_Hotsync.exe_599940f2117296adef2f8cf88fb71dd13d49811c_453e7b5c
    The contents of this file are below:
    Version=1
    EventType=AppHangB1
    EventTime=129778767824850795
    ReportType=1
    Consent=1
    UploadTime=129778767828594802
    ReportIdentifier=442d0996-7d0d-11e1-b71f-3860773c8550
    IntegratorReportIdentifier=442d0997-7d0d-11e1-b71f-3860773c8550
    WOW64=1
    Response.BucketId=503651033
    Response.BucketTable=5
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=Hotsync.exe
    Sig[1].Name=Application Version
    Sig[1].Value=7.0.2.0
    Sig[2].Name=Application Timestamp
    Sig[2].Value=477d91d1
    Sig[3].Name=Hang Signature
    Sig[3].Value=bc1c
    Sig[4].Name=Hang Type
    Sig[4].Value=6144
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.1.7601.2.1.0.256.48
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=1033
    DynamicSig[22].Name=Additional Hang Signature 1
    DynamicSig[22].Value=bc1cf0b12edd45838931663a910ff30a
    DynamicSig[23].Name=Additional Hang Signature 2
    DynamicSig[23].Value=f395
    DynamicSig[24].Name=Additional Hang Signature 3
    DynamicSig[24].Value=f3958bdfd9e79ef2d3426c5f57683e36
    DynamicSig[25].Name=Additional Hang Signature 4
    DynamicSig[25].Value=bc1c
    DynamicSig[26].Name=Additional Hang Signature 5
    DynamicSig[26].Value=bc1cf0b12edd45838931663a910ff30a
    DynamicSig[27].Name=Additional Hang Signature 6
    DynamicSig[27].Value=f395
    DynamicSig[28].Name=Additional Hang Signature 7
    DynamicSig[28].Value=f3958bdfd9e79ef2d3426c5f57683e36
    UI[3]=HotSync® Manager Application is not responding
    UI[4]=If you close the program, you might lose information.
    UI[5]=Close the program
    UI[6]=Close the program
    UI[7]=Close the program
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    FriendlyEventName=Stopped responding and was closed
    ConsentKey=AppHangXProcB1
    AppName=HotSync® Manager Application
    AppPath=C:\Program Files (x86)\Palm\Hotsync.exe
    ReportDescription=A problem caused this program to stop interacting with Windows.
    Can anyone help me?
    Post relates to: HP TouchPad (WiFi)

    Okay - I got preview back - it seems to have gotten hung and corrupted, so I went to library and fixed the permissions there
    Click on "Go" in the Finder menu bar while holding down ⌘ key     and you will see Library appear in the pull-down menu, click on it and it     will take you to the "Library Folder".
    Hit the ⌘I keys, to get to pull up the “Get Info” window on the     “Library Folder”.
    Unlock the pad lock in the lower right hand corner.
    Click on the + symbol to add a user.
    When prompt add the 'root user'.
    Give the root user Read/Write privileges.
    Lock the pad lock and open Preview.
    But that wasn't enough so I went back to disk repair and even though I had just run it , this tim it fixed a slew of permissions problems -
    I then restarted and viola - I was able to use Preview again.
    Computer is running a little fast too.
    Thank you everyone..

  • Websites will not clear, even when I try to clear history, and restart.. They ALL come back dozens of them. This is making Firefoc useless. Why?

    Why has it suddenly happened that whenever I go on Firefox the screen is clogged up with websites I have been onto in the last hours, and they will not clear and will not allow me to get back to my bbc home website without difficulty

    In '''Options window''' at '''General panel''' scroll and put '''SHOW MY HOME PAGE'''(probably you have ''Show my windows and tabs from last time'' here), if you have set home page to BBC then every time you open firefox you must see your BBC home page.
    see:
    https://support.mozilla.com/en-US/kb/Options%20window%20-%20General%20panel#w_startup
    see also:
    https://support.mozilla.com/en-US/kb/Session%20Restore#w_configuring-session-restore
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Facebook will not show profile pics or chat list pics , but ie will , is it a setting

    the only pics (icons) it will show are the generic male female icons that facebook provides if you don't load your picture when i check the error console it has lots of errors ,,,,,i don't know a thing about that part, as far as i can tell only facebook is affected

    With Facebook on display, click on the site identity button (for details on what that is see the [[site identity button]] article) and then on More Information. This will open up the page info dialog.
    First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
    Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
    This should hopefully resolve your issue, but also see [[Images or animations do not show]].
    Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.

  • Lightroom will not tether to my 5D, 5D Mark 2 but it will to my 30Ds

    I am tethering to 3 new laptops using Windows 7 and LR 3.3 will tether to my 30Ds, but not to my 5D or my 5D Mark2.  LR 3.3 actually did work with the Mark 2 for about 400 images , then it said it could not find the camera. Still works with the 30. I have swapped cables, laptops, and even to some of my PC's and I get the same thing.
    I looked at Canaons website for a driver download, but did not find anything.
    Is anybody capturing tethered with either of these camreas?
    Thanks

    Ronchast said:
    I found this from Windows 7 64 bit - Tells All
    http://www.microsoft.com/windows/compatibility/windows-7/en-us/Browse. aspx?type=Hardware&category=Cameras%20%26%20Photo&subcategory=Digital% 20Cameras&sort=ProductNameAsc&results=50
    At the above Microsoft Windows 7 64 bit OS compatibility link the 5D MKII is shown as 'Compatible,' but not the 5D or the less than 1-year old 60D.
    At this link
    http://photography-on-the.net/forum/showthread.php?t=781825&page=2 one of the posters suggests:
    If you have win7 64 bit you have to change your connection type from PC to PTP and then it will work just like it should. I have no idea why that works but it does, at least with my 5D and win7 64 bit.
    This may work for file transfers, but I don't think this will help for tethered mode. Other possibility is to use Windows 7 XP mode or Virtual PC:
    http://www.microsoft.com/windows/virtual-pc/download.aspx
    Setup of a virtual enviroment for use with LR is not for the faint of heart....I would only recommend it if you absolutely need tethered mode for your 'Not Compatible' camera.
    BTW - No harm will come from connecting ANY camera to a USB port on a system without comaptible drivers. It just won't connect or transfer files. Not to worry!

  • Firefox will not open PDF files from my financial website, but IE will.

    When I try to open reports in Fidelity, UBS, etc, the file downloads, but removes the extension so it won't open and I get the message "Unknown file type". I tried the same procedure in IE, and the files open without problem. I do not want to use IE. How do I get the files to open. This is a recent (~5 days) problem.
    Thanks,
    Bill

    See if either of these support article help you.
    https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
    https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

  • PowerMac G4 OS 10.4.11 will not recognise RAW images on a SDHC card but it will see JPGs why?

    Question:
    I have a PowerMac G4 OS10.4.11.  I have recently bought a Lumix LX5 camera and it uses an SDHC card.  My Mac will not recognise RAW image files stored on it either by plugging the camera into a USB slot or by using a USB card reader.  Can anyone tell me how to overcome this problem?

    Thanks for that,
    I downloaded RPP and it does indeed open the RAW files and lets me convert them into TIFFs or JPGs which I can then import into Photoshop to play with.  However I'm still confused about why I can't open them in Photoshop directly.  My other camera is a SLR saving to a SanDisk Extreme lll Compact Flash card and I can open RAW files off that on the same computer with no problem using a Photoshop RAW converter plug-in.

  • My contacts book will not open so I reset to factory settings but I still have the same problem what can I try next?

    The address book on my iPad2 will not open although it did before I downloaded iCloud. Following the manual instructions, I reset the iPad to network settings but the address book will still not open. I would be grateful for any advice on what to do next.

    Have you an iCloud email address? Try deleting it temporarily.

  • I designed a site for a customer, exported HTML, customer wanted to launch the site themselves so when they did so it will not work on a mobile device or tablet but is fine on the PC browser.

    The customer is using AT&T as the host, it seems to automatically map to the a mobile site when on a phone or tablet, could the mapping to a tablet site be on AT&T's end?
    I never setup the tablet or mobile site through Muse.

    As you don't include a link or other copy of your code there is no way we can answer this… however:
    Upload a copy of the site to bc (business catalyst) from Muse or Dreamweaver (if Muse can't) as a temp web site then test that the code works for laptop and phones. If it works on your bc site then your code IS correct and you have answered the main question as yes AT&T is the issue… this is basic testing and you (seriously) already should have done it before letting your client see it.

  • My ipod touch will not be recognized when i plug into computer.....the screen displays the itunes logo with a picture of the charger.....will not do anything else.  Does anyone have any ideas???

    My ipod is not being recognized.  I only get a picture of the itunes logo, and the charger.  Can anyone help me.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

Maybe you are looking for

  • I have tried to update 6 apps. But they are all frozen for a day now I could delete them and reinstall but one is no zombies allowed and I don't want to lose content, can anyone help?

    I have tried to update 6 apps but they are all frozen . They either say loading or installing but are doing nothing.  I would delete them and try to reinstall, but one is no zombies allowed and i don't want to lose the game I. Have built up, can any

  • Memory Card Problem

     I have an HP Pavilion Media Center m8000n computer.  The product number is RX881AA.   I performed a full recovery but I am missing the some drivers.   Under Portable Devices, Compact Flash, MS/MS-Pro, SD/MMC, and SM/xD-Picture all have exclamation m

  • Best audio format for recording speech?

    Hello everybody, I was wondering which audio format (encoding, sample rate, sample size) is considered best for recording speech in regard of memory usage and perceptible/acceptable quality loss. What do you suggest, what are your experiences, what r

  • Problem installing  jdeveloper

    Can't seem to install the jDeveloper either. Were is jdevw.exe. Its not in .jdev/bin. The only executable is jdexec and it does nothing. It look like a great set of development tools. If only I could get it to work. Would like comments on what other

  • Question about decode

    hi all i have a table called employee_report PRCNT_DOWN number(5,2) i want to show the precent with the sign % lets say that the values are PRCNT_DOWN 0 0 5 3 so i did like this select decode(0,0,(to_char(PRCNT_DOWN,'999.99')||'%')) as aa from employ