FAX doesn't work

FAX option is inoperable. Tried to set up again but get message that FAX is not on line. We can print and that is all. We were able to FAX until recently.

Hey , Thanks for posting in the HP Support Forum. I see that you're unable to setup eFax with your HP Photosmart 7515 e-All-in-One Printer. I would like to advise you on this issue. I have some suggestions that might help. eFax requires both a wireless and webservices connection; you can find the steps you need to troubleshoot that connectivity in this article from HP. If you've never completed the setup successfully this other HP article will be more suited to your needs in getting your printer registered and connected. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue and you liked this post, feel free to give me virtual props by clicking on the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

Similar Messages

HP windows 8.1 fax doesn't work

Hi everyone and HP expert,
I want to use HP computer as a fax machine, it'll be very easy to receive and sent fax from pc and also it's easy to keep all files. The most important is it will save envirement, no more Fax machine and less paper.
But, HP windows 8.1 fax function doesn't work.
I could sent fax out from pc but can NOT receive fax.
I could see fax caming ringing, but could NOT get it.
It's a windows 8.1 problem, it also happen on windows8 and windows server 2012.
Does HP expert have any resolution to fix it? I want PC works as a Fax machine.
Thanks for any suggestion,
IT-ant
HP model: Pavilion 500-199
Fax Modem: USRobotic and Lenovo

Hi @IT-ant ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

FAX doesn't working through SIP

Hello.
Fax Machine is connected to SPA 122. Cisco CUCME is used. SPA 122 doesn't support SCCP (only SIP). Fax machine works as ordinary telephone device, but doesn't work as fax machine. What is a problem?
Thanks in advance.

Hi @brkgb ,
I understand that you are able to print, but you can't send a fax. I would like to help you.
Can you make a copy from the glass and ADF?
Print out a Fax test.
Touch the setup button, (wrench)
arrow to Service menu, press OK, then right arrow to fax service, OK, then run fax test.
You should have 4 passes if everything is communicating properly.
We need to check some settings on the printer for faxing.
Private receive:
On the printer touch the setup button, (wrench) right arrow to fax setup menu, OK, fax receive setup, OK, private receive, OK, turn it off.
Error correction:
Go to the setup button, (wrench) right arrow to fax setup, all faxes, error correction, OK, turn it off.
Speed:
Go to the setup button, (wrench) right arrow to fax setup, OK, all faxes, OK, fax speed, OK, change it to medium, OK.
Clear saved faxes:
Go to the setup button, (wrench) right arrow to fax functions menu, clear saved faxes, OK, OK to clear.
Try to send a fax again.
If you are still having issues then go through the steps to see if it will resolve this issue.
Cannot Send or Receive Faxes.
If you need further assistance, please let me know the following information.
Did the fax test pass?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire phone cable?
Do you have distinctive ring set up?
Is there any voice mail set up?
Do you have a answering machine?
(Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP 860 Machine has dial tone but fax doesn't work

I have dial tone but cannot send or receive faxes. Get message on machine "unable to send or receive faxes".

Hi @larsfal39 ,
I see by your post that you can't send or receive a fax. I would be happy to help you.
Here is a support document for troubleshooting: Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker. Please provide the following:
Are you able to send and receive faxes?
Did the fax test pass?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using a filter?
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Help: Fax doesn't work now !

Hi guys,
Wonder if anyone can throw some light on this?
We just got a new phone system installed at work and apart from now having to dial 9 to get an outside line, things look fine.
At the same time, our office manager has installed a new version of FaxStf (Pro)
Now, after these two "updates" to our system, when we try to send a fax, a window appears which tells us it's "preparing Fax" - and that's where it stays.
I've checked the Driver, and we have "Fax print" in the printer setup pref's, and also I've just tried to re-install the application - but things are still the same!
I've tried repairing permissions, but no changes have occurred.
One note: When I did the install, the FaxStf printer appeared in the listing, but the Apply Button was greyed out - I had no chice but to use the generic Faxprint driver - is this normal?
Any help would be most appreciated.
Many thanks,
Steve

Hello Steve and Welcome to Apple Discussions.
I'm with K Shaffer on this one the use of a Mac a a fax machine is rare and on the occasions I've done it I use OS X's fax capabilities. Very few people on these boards will have sufficient experience to assist you. Try getting support from Smith Micro.
regards
mrtotes

Fax test shows passed but fax doesn't work comm error

new machine . fax test passed but when fax is trying to be sent comes back as comm error. help

Hi @farmerj15 ,
I see by your post that when you try to send a fax you are getting a comm error, the fax test all passed. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
I have provided a document to go through the steps to see if that will resolve the issue.
Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker if you are still having issues.
Please let me know the following:
Can you receive a fax?
What kind of line do you have? (Analogue, DSL, Cable Modem)
Where is the fax cable connected to? (modem, wall jack)
Are you using a filter?
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

Title says it all:
How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

Hi Auracles1,
Here's a pretty discussion regarding wireless printing with this device and a Mac.
http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/HP-Officejet-6500-E 709n-wireless-issue/m-p/258853
I have a similar OfficeJet and it was a multi-step process. (1) Install printer drivers on the machine, (2) Add the printer queue in print & fax, (3) Run the "setup wizard" from the disc for wireless printing.

When I move a harddrive with Bootcamp from my mac pro to my macbook, windows doesn't work

I have a 13" Intel Core 2 Duo MacBook and the topcase-keyboard doesn't work and so for some reason, it makes it impossible for me to install windows on the bootcamp partition. While the windows installer is running, it doesn't recognize usb keyboards. So I decided to install windows 7 professional on that same drive using my Mac Pro. The installation worked perfectly.
Then I take that harddrive and I move it back to my MacBook and windows won't start up correctly, stating that something has changed (of course!...duh).
Can anyone help me with a workaround for this?
Has anyone had similar problems moving a windows partition in bootcamp from one mac to another?
How can I install windows on a MacBook without a working topcase?
I've posted this question to the Snow Leopard community because that's the OS I'm using.

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

IPhone 5 contacts local sync via usb doesn't work - updated

Syncing an iPhone 5, AT&T 64GB, with Macbook Air 11" mid-2011, 1.8GHz / 4GB.
OS X 10.10.2; iTunes 12.1.0.50; iOS 8.1.3.
I am trying to sync my contacts from my OS X Contacts App to my iPhone 5 via USB. The contacts do not sync. The contacts are local, "on my mac". I am using a usb cable through iTunes.
The iPhone 5 was just restored by Apple Configurator, set up as new iPhone, and is supervised by the MacBook Air.
I am also synchronizing my local Calendars from the OS X Calendar app; these transfer just fine. This makes me think it is probably not to do with the entire setup of the iPhone, i.e. that it is managed by apple configurator, since some of the sync works correctly.
Under "info" in the iTunes sync dialog, I have selected the "sync contacts" and "all contacts" and "sync calendars" and "all calendars" options.
Interestingly, while the Calendars sync options displays options of "selected calendars" and a list of my calendars available to sync, the Contacts section "selected groups" is grayed out. I have one group in Contacts, and it does not show up by name for "selected groups". Instead, the area where groups should be listed for selection is empty. Perhaps iTunes does not have access to my local contacts? It is not listed under apps with access to my contacts under security and privacy, and it has not requested access to my contacts.
I created a fake contact on the phone and synced it with iTunes. I then turned off contact syncing in iTunes and told it to remove previously synced contacts. The fake contact disappeared. When I turned contact syncing on again, the contact was again pushed to the phone. However, the fake contact did not appear at any point in the OS X Contacts App, and none of my OS X Contacts appeared on my phone -- only the fake contact I had created on my phone and then synced with iTunes.
I also created a (different) fake contact in OS X Contacts. iTunes sync did not transfer this contact (or any others) from OS X Contacts to iPhone.
SUMMARY:
- syncing iPhone 5 via USB with iTunes
- Calendar sync works
- Contacts sync doesn't work
- iTunes appears to have no communication with the OS X Contacts app; in system prefs > security and privacy > privacy > contacts, Pages and Word have access to Contacts, but iTunes is not listed. iTunes Contacts sync "selected groups" does not display my OS X Contacts group names.
- Contacts created on iPhone sync back to iTunes and are restored back to the iPhone if deleted and resynced.
- Contacts created on iPhone do not sync back to OS X Contacts; Contacts in OS X Contacts do not sync to iPhone.
(apologies for premature posting to "Using iPhone"; I accidentally submitted and now can't delete or edit).

Here's the resolution: I went to my local Apple store and spoke to the guy. After some discussion it turned out that one of the staff had had a similar problem. He suggested this course and I can report that it seems to work. So, (1) open your system preferences and then the print & fax setting and delete the printer in question (2) disconnect the USB between the printer and the TimeCapsule (3) shut everything down and turn off power to your modem, your TimeCapsule and your whole system (4) power on each item in its normal sequence (5) wait for your iMac to complete its boot-up, (6) re-connect the USB between the printer and the TimeCapsule (7) open system preferences and search for and install the relevant printer (8) try printing.
This is hardly elegant, but it worked. I am told (by the same Apple store) that hitting the "reset" button in the TimeCapsule might also work. If this is intuitive or obvious to anyone else then my compliments to them ...
Cheers
OzHutz

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

HP photosmart C6280 scan doesn't work after once working

I can't understand it - six weeks ago I came on this forum with this problem and it was solved. I used Preview and' import from scanner' which worked fine. I tried it yesterday and it doesn't work again! I've downloaded new drivers from a site suggested to someone else on the forum with the same problem, but it still doesn't work. All I get when I go into System Preferences - printers & fax - is 'No scanner selected' its driving me mad! I had to go and do scanning from my old PC! Heresy! Someone please help!

I seem to have resolved this problem now. I uninstalled ALL stuff I had downloaded including drivers etc., and just went to the page suggested on this forum and put on the new stuff from HP I can now scan properly from my computer without using Preview.

Page Setup dialog doesn't work

Hi everyone
My generic Page Setup dialog box as e.g. used for Word etc. doesn't work:
In the Page Setup dialog, the "Setting" menu doesn't work at all, i.e. I can see the dropdown but it doesn't accept my changes (it's fixed on "Page Settings"). All other menus or choices are accepted but then the "OK" button doesn't work; it just flickers briefly and then goes back to blue. The "Cancel" button makes all contents of the dialog box disappear except for the frame and the buttons. Either way force quitting and relaunching the application is the only way to continue working in the application.
What could be the issue here?
A few specs on my hardware, printer and system:
- MacBook Pro (brand new)
- OS X 10.5.5
- Printers: hp LaserJet 4200 (main printer), iP5200R, OKI B6200, Lexmark E321. All these printers I used without problems with my old PowerBook G4.
The problem occurs with all applications using this generic Page Setup dialog, such as Word, Grab etc. In Excel e.g. all these functions work (it uses a different kind of dialog box for the page setup).
The problem could possibly have started to occur when the Lexmark printer could not be installed automatically so I assigned it another Lexmark driver, which seemed to work. But I'm not sure whether those two problems occurred at the same time.
What I tried already:
- uninstall and reinstall all printers in the Print & Fax part of the System Preferences. I uninstalled all printers and (without restart) reinstalled the hp printer only. The problem was still there, even upon restart.
- reinstall Word (first I thought it was a Word problem)
Any ideas??
Message was edited by: thuns72
Message was edited by: thuns72

Hi,
Try to increase the size of repeating frame, as I follow this strategy in my report find the outermost repeating frame and increase its size to whole page than increase the size of your required repeating frame if you want to break page on this group, no need to set max record and page break properties(as I saw page break property never works).
Thanks.
Khawar

Create a PDF from webpage using entire site option doesn't works

OK, guys, this is the problem...
After YEARS of testing from Acrpbat 4 thru 9 on Create a PDF from webpage using entire site option... it doesn't works properly and doesn't got the entire site. ALWAYS get an error of memory or any other error but FINALLY you NEVER got the entire site. I'm talking for a big website... not like amazon.com, but a big one.
I make a walkarround to try to capture the website in parts but Acrobat is not "intelligent" to make a resume capture of the site, because ALWAYS start from the begining instead from the resume position of the site...
My question is, HOW can get the ENTIRE SITE in a PDF document... without getting errors or stopping the capture process...
Don't have problem of low RAM memory because I'm in a MONSTER MACINTOSH.... 3.2 GHZ with 8 Core and 32 GB of RAM under Mac OS X Leopard 10.5.6 in Acrobat 9 Pro.
If I'm not wrong, the GET ENTIRE SITE option in Web Capture (Create a PDF from webpage using entire site option) doesn't works from Acrobat 4 thru 9 in Pro version... tested, you'll never got the entire site... I'm talking in capture a huge entire site and not a little one...
Can someone help me?
Thanks.

Ok so I go to a web page and select something to print. Once I've clicked print I switch over from printer/micosoft xps docu writer/fax and select Adobe PDF. All goes through with a 'Create Adobe PDF' coming up progressing through to eventually save and store. Once I open the file it end up as the picture above. I have the same version on another computer and that works fine but this particular Sony laptop it doesn't seem to work properly.

ActiveDirectory mapping file, doesn't work for login

The mapping file below works.
Logged in as administrator, in the SAP NP administrator web tool,
I can see and edit users in the datasource (Active Directory).
However, when users in the AD try to login to the portal, they get "User authentication failed".
Default trace log show:
Authentication failed on LDAP server: back end message [LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 775, vece]
and
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key DS_AD_I
Any ideas on what in the configuration file below,
that could cause these errors ?
====================================
Configuration file
====================================
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE dataSources SYSTEM "dataSourceConfiguration.dtd">
<dataSources>
 <dataSource id="PRIVATE_DATASOURCE"
 className="com.sap.security.core.persistence.datasource.imp.DataBasePersistence"
 isReadonly="false"
 isPrimary="true">
 <homeFor>
 <principals>
 <principal type="group"/>
 <principal type="user"/>
 <principal type="account"/>
 <principal type="team"/>
 <principal type="ROOT" />
 <principal type="OOOO" />
 </principals>
 </homeFor>
 <notHomeFor/>
 <responsibleFor>
 <principals>
 <principal type="group"/>
 <principal type="user"/>
 <principal type="account"/>
 <principal type="team"/>
 <principal type="ROOT" />
 <principal type="OOOO" />
 </principals>
 </responsibleFor>
 <privateSection>
 </privateSection>
 </dataSource>
 <dataSource id="AD_I"
 className="com.sap.security.core.persistence.datasource.imp.LDAPPersistence"
 isReadonly="false"
 isPrimary="true">
 <homeFor/>
 <responsibleFor>
 <principal type="account">
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="j_user"/>
 <attribute name="logonalias"/>
 <attribute name="j_password"/>
 <attribute name="userid"/>
 </attributes>
 </nameSpace>
 </principal>
 <principal type="user">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="firstname" populateInitially="true"/>
 <attribute name="displayname" populateInitially="true"/>
 <attribute name="lastname" populateInitially="true"/>
 <attribute name="fax"/>
 <attribute name="email"/>
 <attribute name="title"/>
 <attribute name="department"/>
 <attribute name="description"/>
 <attribute name="mobile"/>
 <attribute name="telephone"/>
 <attribute name="streetaddress"/>
 <attribute name="uniquename" populateInitially="true"/>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
 </attributes>
 </nameSpace>
 <nameSpace name="$usermapping$">
 <attributes>
 <attribute name="REFERENCE_SYSTEM_USER"/>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 <principal type="group">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="displayname" populateInitially="true"/>
 <attribute name="description" populateInitially="true"/>
 <attribute name="uniquename"/>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE"/>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.bridge">
 <attributes>
 <attribute name="dn"/>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 </responsibleFor>
 <attributeMapping>
 <principals>
 <principal type="account">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="j_user">
 <physicalAttribute name="samaccountname"/>
 </attribute>
 <attribute name="logonalias">
 <physicalAttribute name="samaccountname"/>
 </attribute>
 <attribute name="j_password">
 <physicalAttribute name="userPassword"/>
 </attribute>
 <attribute name="userid">
 <physicalAttribute name="null"/>
 </attribute>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 <principal type="user">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="firstname">
 <physicalAttribute name="givenname"/>
 </attribute>
 <attribute name="displayname">
 <physicalAttribute name="displayname"/>
 </attribute>
 <attribute name="lastname">
 <physicalAttribute name="sn"/>
 </attribute>
 <attribute name="fax">
 <physicalAttribute name="facsimiletelephonenumber"/>
 </attribute>
 <attribute name="uniquename">
 <physicalAttribute name="samaccountname"/>
 </attribute>
 <attribute name="loginid">
 <physicalAttribute name="null"/>
 </attribute>
 <attribute name="email">
 <physicalAttribute name="mail"/>
 </attribute>
 <attribute name="mobile">
 <physicalAttribute name="mobile"/>
 </attribute>
 <attribute name="telephone">
 <physicalAttribute name="telephonenumber"/>
 </attribute>
 <attribute name="department">
 <physicalAttribute name="ou"/>
 </attribute>
 <attribute name="description">
 <physicalAttribute name="description"/>
 </attribute>
 <attribute name="streetaddress">
 <physicalAttribute name="postaladdress"/>
 </attribute>
 <attribute name="pobox">
 <physicalAttribute name="postofficebox"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
 <physicalAttribute name="memberof"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="$usermapping$">
 <attributes>
 <attribute name="REFERENCE_SYSTEM_USER">
 <physicalAttribute name="sapusername"/>
 </attribute>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 <principal type="group">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="displayname">
 <physicalAttribute name="displayname"/>
 </attribute>
 <attribute name="description">
 <physicalAttribute name="description"/>
 </attribute>
 <attribute name="uniquename" populateInitially="true">
 <physicalAttribute name="cn"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE">
 <physicalAttribute name="member"/>
 </attribute>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
 <physicalAttribute name="memberof"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.bridge">
 <attributes>
 <attribute name="dn">
 <physicalAttribute name="null"/>
 </attribute>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 </principals>
 </attributeMapping>
 <privateSection>
 <ume.ldap.access.server_type>MSADS</ume.ldap.access.server_type>
 <ume.ldap.access.context_factory>com.sun.jndi.ldap.LdapCtxFactory</ume.ldap.access.context_factory>
 <ume.ldap.access.authentication>simple</ume.ldap.access.authentication>
 <ume.ldap.access.flat_group_hierachy>true</ume.ldap.access.flat_group_hierachy>
 <ume.ldap.access.user_as_account>true</ume.ldap.access.user_as_account>
 <ume.ldap.access.dynamic_groups>false</ume.ldap.access.dynamic_groups>
 <ume.ldap.access.ssl_socket_factory>com.sap.security.core.server.https.SecureConnectionFactory</ume.ldap.access.ssl_socket_factory>
 <ume.ldap.access.server_name>machine.company.com</ume.ldap.access.server_name>
 <ume.ldap.access.user>[email protected]</ume.ldap.access.user>
 <ume.ldap.access.server_port>389</ume.ldap.access.server_port>
 <ume.ldap.access.base_path.user>OU=Users,OU=Company,DC=company-tst,DC=local</ume.ldap.access.base_path.user>
 <ume.ldap.access.password>$ume.ldap.access.additional_password.1</ume.ldap.access.password>
 <ume.ldap.access.base_path.grup>OU=Groups,OU=Company,DC=company-tst,DC=local</ume.ldap.access.base_path.grup>
 <ume.ldap.access.objectclass.user>User</ume.ldap.access.objectclass.user>
 <ume.ldap.access.objectclass.uacc>User</ume.ldap.access.objectclass.uacc>
 <ume.ldap.access.objectclass.grup>Group</ume.ldap.access.objectclass.grup>
 <ume.ldap.access.naming_attribute.user>cn</ume.ldap.access.naming_attribute.user>
 <ume.ldap.access.auxiliary_naming_attribute.user>samaccountname</ume.ldap.access.auxiliary_naming_attribute.user>
 <ume.ldap.access.naming_attribute.uacc>cn</ume.ldap.access.naming_attribute.uacc>
 <ume.ldap.access.auxiliary_naming_attribute.uacc>samaccountname</ume.ldap.access.auxiliary_naming_attribute.uacc>
 <ume.ldap.access.naming_attribute.grup>cn</ume.ldap.access.naming_attribute.grup>
 <ume.ldap.unique_user_attribute>samaccountname</ume.ldap.unique_user_attribute>
 <ume.ldap.unique_uacc_attribute>samaccountname</ume.ldap.unique_uacc_attribute>
 </privateSection>
 </dataSource>
</dataSources>

<?xml version="1.0" encoding="UTF-8" ?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>WebApp</display-name>
- <welcome-file-list>
<welcome-file>login.html</welcome-file>
</welcome-file-list>
- <error-page>
<error-code>404</error-code>
<location>/Error.html</location>
</error-page>
<jsp-config />
</web-app>
This is a very simple war with no component and an error page is defined. But this doesn't work. When I type something like /loginnnn.htmllll, it doesn't give me the error page. That is my problem. Any idea???

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

FAX doesn't work

Similar Messages

Maybe you are looking for