My iPad mini would not connect in order to download an update, I decided to go to original settings, the screen is frozen showing the apple logo and nothing else, it will not respond.
My new iPad mini would not download an update bnor allow access to app store downloads etc, I decided to revert to original factory settings, the screen is now frozen, showing only the Apple logo in white on a black background, it is now frozen, what can I do?
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Similar Messages
-
I have an iPad 2nd generation and all it does is show the apple logo continuously and nothing else. I cannot get into the iPad and I have tried to restore it numerous times but it comes up with error 19 or error 14. Or it restores but after it has it just comes back up with the apple logo once again and nothing changes or it flashes a few times. does anyone know how to fix this?
Cheers MegYou need to put your iPad into Recovery Mode. Follow the instructions in this Apple support document very carefully. It might take several attempts to get it to work.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
My iphone 4s crashed today and will not go back on. I see the apple logo, but nothing else will happen.
Hello jaicob1990,
Try the steps in the article below; it will give you multiple options on how to resolve the issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I have the original iPad- about 18 mod old. I tried to download an etool program and it required iflashplayer. My iPad wouldn't do it. I went to the apple store and they told me to update my software to iOS 5.1.1 which I did . Now none of the apps I had installed prior to this work. The icons are still on my screen but when you touch them, it just blinks and nothing happens..like the screen is frozen. How do I restore all of these apps and favorites that I had on prior to this update? Please speak in very non- tech terms if possible. I am VERY low tech unfortunately!
Welcome to Apple Communities
You must use iTunes. Connect your device to your computer, open iTunes, select your device in the sidebar and press Restore. Then, you can restore your device from a backup, and sync the device with iTunes to transfer your files to it pressing Sync button -
help me out
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Hi, I'm having trouble with my Ipad 2. I was recently playing a game and my ipad just shut off on me. Then when I turned it back on it was stuck on the Apple Logo and it won't go to the home screen at all. I plugged it in my itunes but I don't know what to do from there. I left it charged hoping the apple logo would dissappear but it didn't and now for some reason the battery is always dead. I really need help. Does anybody have any suggestions? Please.
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
HT4061 my touch screen on my iPad mini is not responding
my ipad mini is not responding to me?
Try a soft reset by simultaneously pressing the home and power buttons until you see the Apple logo, then release both buttons. This is a good trouble shooting step since it is so easy, and you won't lose ant data.
-
My ipod touch wont boot up it shows the apple logo and then blinks on and off.
My second ipod touch wont connect to itunes/be recononized it is totally locked.. i looked at videos on the internet, and they say connect it to the FIRST computer that it was connected to,, the only thing is i no longer have that computer... so what do i doFor both
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response. Any ideas as to what may be wrong and what I can do?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPad fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.
-
My ipad wont turn on it stops at the apple logo and i get little white wording that says this device is not using requires_boot_connect_on_reset. Not sure what is going on. also says appleBCMWLANBusInterfaceHTSIC reset chip
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
And then put in rice for 3 days and plugged it into my computer but it keeps flashing the Apple logo and a no charge sign. It also is not connecting to my computer and it does not say "Amelia's iPhone" in iTunes
Put it in rice for another 4 days.
Maybe you are looking for
-
How to get an Unique id or something like an autoincrement ID
HI! I am a SAP newbie! I want to create a database table with an unique id. Does something like autoincrement exist? Another Problem is that i don´t know which database will be used (sapdb, oracle, ....) so i can´t use oracle or sapDB spesific functi
-
I can't reterive sequerity question for my apple id
i can't reterive sequerity questions for my apple id <Email Edited by Host>
-
Different ways of passing procedure's paramters
Hi, In the following example, I am calling the procedure p_test in different ways. I understood from reading examples, that we can pass parameters using the syntaxe : " Name of the parameters => Value". But I did not find anything official about it.
-
Error on DS creation (ResourceException: Could not create pool connection)
Hi, When trying to create a DS on a WLS 10.3 on Windows Vista to connect to an Oracle 10.2.0.4 RAC database, I am getting the exception below. I use the OCI driver. Everything's fine when I use the thin driver though. <Jan 31, 2009 9:56:56 AM AST> <W
-
Clarification reg AIMD DataSources
Dear All, Few Doubts reg AIMD Datasources in CRM. If a document is changed, how will this Datasource fetch the record. Here we have a document 'X' for whihc the user have changed some statsus from 'A' to 'B' (the status is a Z field). Then how the re