HT4623 unable to connect iphone 5 to computer why?

why am i not able to sync my iphone 5 to my pc

Very vague.
What happens when you try?
Any info at all?

Similar Messages

  • I am unable to connect iphone 5 to itunes.

    I am unable to connect iphone to itunes.
    Message that pop-up. "i need to download 10.7 or later". I can not download 10.7 because it says that my computer is not compatible. I downloaded itunes 10.6 but it does not work.
    Mac version 10.6.8

    iPhone requirements: from http://store.apple.com/us/browse/home/shop_iphone/family/iphone/iphone5#tech-spe cs
    System Requirements
    Apple ID (required for some features)
    Internet access5
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.apple.com/itunes/download)
    iTunes requirements: from http://www.apple.com/itunes/download/
    Macintosh System Requirements
    Mac computer with an Intel Core processor and 512MB of RAM
    OS X version 10.6.8 or later
    Safari 4.0.3 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    MJ

  • Iphone 4 is not recognized by itunes and is only on emergency mode, keeps telling me to connect to itunes but when I connect iphone to computer it does not recognize it

    iphone 4 is not recognized by itunes and is only on emergency mode, keeps telling me to connect to itunes but when I connect iphone to computer it does not recognize it

    Did you try recovery mode?  Hold down the home button as you connect it to iTunes.  iTunes should pop up a window that says "iTunes has detected a device in recovery mode" and give you the option to restore.

  • TS1363 since installing itunes 11.1 i am unable to connect iphone/ipad to itunes?

    since installing itunes 11.1 i am unable to connect iphone/ipad to itunes?

    Hey there Jantje1,
    It sounds like you are unable to launch iTunes and get an error message instead. I would try the troubleshooting outlined in this article named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    If it comes down to uninstalling, then re installing iTunes altogether, use this link to download the 64 bit version of iTunes directly.
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I am Unable to connect iphone with Wi Fi and iTunes

    I am Unable to connect iphone with Wi Fi and iTunes is ther any alternative for the same.    

    Dr.sudin wrote:
    I wish to restore the earlier version of the iOS
    You cannot.
    If you are having issues with yoru SIM, contact your data carrier or the Apple store.

  • TA38622 is there any way to send sms by a connected iPhone to computer ? if so does it need any special application and program ? with witch port ? thank you.

    is there any way to send sms by a connected iPhone to computer ? if so does it need any special application and program ? with witch port ? thank you.

    Hi, Santosh..., and welcome to the Community,
    I would recommend testing the SMS reply forwarding to your mobile number.  Depending upon the results and if this works for you, you could then contact Skype Customer Service to cancel and request a refund.
    In other words, SMS will be received via your mobile number, not via your Skype Number.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • CI********C13 is the serial no. Mac book pro. Blinking folder unable to connect the hard drive why?

    CI********C13 is the serial no. Mac book pro. Blinking folder unable to connect the hard drive why?
    <Personal Information Edited by Host>

    That means that a valid startup disk can't be found.
    A flashing question mark or globe appears when you start your Mac - Apple Support
    Your startup disk could be corrupted, the disk failed, or poor connections
    Reset the SMC and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try booting to Recovery and repairing the HD
    OS X: About OS X Recovery - Apple Support
    Next reinstall the OS if Disk Utility in Recovery can see the HD
    OS X Yosemite: Reinstall OS X
    If the HD can be found check the connection. Next replae tthe HD
    Last:
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Unable to connect iphone to laptop

    After updating to itunes 11.1, my iphone 5 has been unable to connect to my laptop through the USB cable. When I plug it in, a sound plays as if connected, but nothing shows up in either itunes or my computer. Before updating to itunes 11.1, my iphone was able to connect to my laptop. Only after updating and restarting the computer as recommended, did my iphone stop being able to connect.
    My laptop runs on windows 8 and iphone runs on iOS 7.
    I have tried restarting my laptop and iphone but to no avail. I am able to connect my iphone to another laptop, also running on itunes 11.1. I have tried 2 different cables to connect to my laptop and neither worked.
    Help please!
    Thanks

    Solved!
    I had to follow the following help page:
    http://support.apple.com/kb/TS1538
    Unplug your iphone, take a screenshot, then replug it back in. Tada! Solved.

  • When connecting iphone to computer iphoto always loads

    When connecting iphone to my computer iphotos always loads on top. how do I stop iphotos from loading

    When there are photos in your iPhone's Camera Roll, your iPhone is also detected as a digital camera when connected to your computer. Although photos in your iPhone's Camera Roll are included with your iPhone's backup, which is updated by iTunes as the first step during the iTunes sync process, photos in your iPhone's Camera Roll should be imported by your computer as with any other digital camera. Not a good idea to depend on your iPhone's backup alone for these photos, and deleting the photos from the Camera Roll after the import process is complete will improve your iPhone's backup time. If you want any of the imported photos available on your iPhone for viewing, you can add the photos to an existing iPhoto album already selected to be transferred to your iPhone followed by a sync, or create a new iPhone album for the recently imported photos, select the new iPhoto album under the Photos tab for your iPhone sync preferences followed by a sync.
    http://support.apple.com/kb/HT3603

  • "Unable To Connect" iPhones on iOS 6.1.2

    Hi,
    I have a Cisco AP1142N on software version 12.4(21a)JA1. I am able to get my iPhone 5 on iOS 6.1.2 and my iPad on iOS 6.1.1 connected along with a host of other Blackberry and Android devices, however I am unable to get any iPhone 4,4S or 3GS connected even if on the latest iOS version.
    I keep getting the "Unable to Connect" error on the device.
    Is the software version above the latest version? I only have a web interface access to the AP as it is in another part of the building.I currently have TKIP enabled with WPA/WPA2 enabled.
    I would appreciate any help or even be pointed in the right direction, most solutions are command based which are a bit difficult for me to try.
    Many thanks in advance.
    EC

    Right,
    I have now created a new SSID (e.g. GUEST2) for which I have set to use WPA, under express security I can see broadcast enabled for both SSID's, however this second ID cannot be seen by any of my devices. I have ticked the "Multiple BSSID Beacon" as Set SSID as Guest Mode.
    Nothing happens when I try to click the radio button "Multiple BSSID" for the two Radio's.
    Many thanks
    EC

  • Going crazy trying to connect iPhone to computer/iTunes

    I had iTunes installed on my computer, and everything was fine. Didn't have a single problem with it. Then, when I got my new motherboard and processor yesterday, I reinstalled Windows 7, something I do any time I get a new motherboard. So I install iTunes, that goes perfectly fine. Load that up, and plug in my iPhone. First, it pops up with the driver installing for "Apple Mobile Device USB Driver", which goes fine, and uses the usbaapl64.sys driver that the Apple site says it should. Then it tries installing the driver for "MTP USB Device", which fails. And iTunes gives me the error "iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)." or "iTunes could not connect to the iPhone "Jon's iPhone" becuase an invalid response was received from the device.". Varies from time to time when I plug it in.
    I run the iTunes diagnostic for iPhone/iPod Connectivity, and it passes everything except the last one "No iPhone or iPod found." It directs me to this article (http://support.apple.com/kb/TS1363) for help, which none of the steps help. I've also done everything on this article (http://support.apple.com/kb/TS1495), and no luck. Tried redownloading iTunes and installing about 20 times. Even downloaded older versions of iTunes. Nothing. Uninstalled drivers, reinstalled drivers. Nope. ****, I even reinstalled Windows 7 again to make sure nothing was messed up in the installation. No luck.
    I've tried Googling the error, and just about anything I can think of, and nothing is helping. If anybody had any ideas, it'd be great.

    Yes it is documented through forums well now. You may get 0XE8000065, or error code -6999, or error code -48 or combination.
    1. First and best fix is update your BIOS
    2. Some people have been able to switch from back USB port to front and it worked.
    3. Others bought a PCI USB card and installed it on their computer and then connected iPhone to that.
    Message was edited by: iphone3Gguy

  • ITunes quits when I connect iPhone to computer

    I just installed iTunes upgrade 8.0.2 on my iBook G4. iTunes opens when I click on it and and appears to operate okay. No crash. But when I connect my iPhone, iPhoto launches and iTunes unexpectedly quits. Every time. I cannot start iTunes, either, with the phone connected to the computer. This has never happened before, just started when I upgraded to 8.0.2. I have not upgraded my iPhone yet (because iTunes won't launch with it). My iPhone version is 2.1 Your help would be so appreciated!

    I'm having the same problem. I've tried reinstalling itunes, repairing drive permissions, etc. No improvement. Our ipod touch with v2.1 works fine, it seems to be isolated to the v2.2 upgrade I perfromed on my iphone. I'm running itunes 8.0.2. Help?

  • Unable to connect Iphone 5 to Time Capsule Wifi

    I have an intermittent problem where my Iphone 5 is unable to connect to my Home Wifi via Time Capsule.
    Once I was watching youtube then suddenly realised I am on 3g and not connected to my Home Wifi.
    I already configured my Time Capsule's AirPort Utility to the following setting:
    Radio Mode: 802.11a/n - 802.11b/g/n (Automatic)
    2.4GHz Channel: 3
    5 GHz Channel: Automatic

    I am able to scan the other networks from my neighbors which are secured so I am not sure what channels they are in. I am also able to see my network once in a while.
    I had this problem with my Iphone 3gs before and the solution was to set my Time Capsule's 2.4GHz Channel to 3 (which also came from this forum)

  • TS1538 unable to connect iPhone to iTunes (11.0.1.12)

    I have updated iTunes to 11.0.1.12 and I'm now unable to connect any devices to the PC. The following message is displayed: "this iphone cannot be used because the required software is not installed. Run the itunes installer to remove iTunes, then install the 64-bit version of itunes." After following the diagnostics and online help if seems others are having similar problems. After uninstalling and installing the IOS checking the USB drivers and Apple mobile devices settings are correct and have been switched on/off - the same message appears and Iphones still not available in itunes, but shows in windows.
    Anyone any ideas??????

    Thanks for your help Jim
    I found some info in other threads and read that some people had re-downloaded, re-installed and were now working OK. Unfortunately some others went through that pain and still had the issue.
    I found a reference to deleting the file 'iTunes Library.itl' and copying back the previous version of that file.
    I tried this and when I fired up iTunes I noticed there was a window pop up saying iTunes was updating the database to version 11. I then re-imported the CD and now the songs are there in iTunes, the artwork is there and song titles etc. The songs play and everything appears normal again.
    It would appear that my issue was the database was not correctly upgraded correctly durting the original upgrade, this theory is to some extent supported by the fact some people have had success re-installing version 11. This also suggests the upgrade process may be a little flaky.
    Anyway thank you to the person suggesting downgrading the 'iTunes Library.itl' file, sorry I did not take a note of your name.

  • HT4623 unable to connect with server

    Overnight my iPad sent a message that it was unable to connect with server.  All other mobile devices are running fine.  So I feel it is somewhere in the settings of my iPad that needs changing.  I can't get on Safari or iTunes, etc., etc.

    Wi-Fi issue?  Are you in a home or business environment? Have you tried connecting and re-connecting to your wi-fi network? 

Maybe you are looking for

  • Unable to assign Company code to BP :

    Hi Friends, I am creating a Business partner in CRM Server. Through BDOC, it is getting transfered in R/3 through T-code SMW01. I am getting BP replicated successfully in R/3 Server in XD03 T-code. Problem is when i am assingning BP a Company code it

  • Unable to Delete  init request

    HI ALL, i have a delta laod infoapckage, i tried init w/o data tranfer. request  generated with '0' in the data target tab tab. tried making it green and activate, i tried making it red and delete.. but its not getting deleted.. under update tab delt

  • Alternative for STRING_CENTER function module

    Hi, Can any one give me the Alternative for STRING_CENTER function module. it is there in 4.7 when i am using the same  in ecc 6.0 it is giving as absolute statement . Please give the solution for this.

  • LR2 64-bit slower than 32-bit (Mac)

    I ran a test a while back with Lightroom 1.3.1, generating 1:1 previews on a test directory of images: http://www.rassoc.com/gregr/weblog/2008/02/24/mac-pro-performance/ On a Mac pro 2.8 GHz 8-core machine with 12GB of RAM, I found I could generate 2

  • Security flaw, is 6.0.1 affected?

    I have 6.0.1 on my phone, and I don't have enough space to install 7.X.  I can't believe that I can't download the patch (which is probably a couple of kb) by itself.  Is 6.0.1 vulnerable?  I have seen some reports that the issue did not start until